PDA

View Full Version : eaton vacuum ports


Marauder Rick
02-28-2010, 02:29 PM
i need to know where the vacuum ports on the back of the eaton should be routed to. There are 5 vacuum ports on the OE manifold as depicted in pic2. I need to know where these hoses correlate to the eaton. i have numered the ports on the eaton that i am concerned with in pic1 for easier understanding. Also, there is another eaton port on the plenum, lets just call that one #7. Thanx.
RR|Suki
02-28-2010, 03:30 PM
6 in your first pic is the EGR spot

2 and 4 in your second pic are not vac, they are coolant lines

PS there is another vac spot on the underside of the stock upper intake.
jdenning002
02-28-2010, 03:30 PM
#6 is the egr location, you will need the block off plate & screws...
tjl006
02-28-2010, 04:20 PM
#3 capped off
#6 block off plate, was for egr no longer
#1 is hooked up to #4 or #5
#2 is left open not attached
#4or#5 is teed to frps and fuel vapor canistor
Not shown vacuum port on throtle body plenum hooked up to vacuum line for break booster etc. line
Marauder Rick
02-28-2010, 04:49 PM
#3 capped off
#6 block off plate, was for egr no longer
#1 is hooked up to #4 or #5
#2 is left open not attached
#4or#5 is teed to frps and fuel vapor canistor
Not shown vacuum port on throtle body plenum hooked up to vacuum line for break booster etc. line


about 4 and 5. judging from location and looking inside of the blower, 4 is a vacuum and 5 blows out compressed air. that being said, which 1 would you now say goes to #1 and which goes to the fuel vapor canister?
Zack
02-28-2010, 06:27 PM
#3 capped off
#6 block off plate, was for egr no longer
#1 is hooked up to #5
#2 is left open not attached
#5 is teed to frps,#1 and Boost Bypass
#4 is hooked the DFPE valve and cabin vacuum
Port on the plenum is for the Brake Booster.


^^^this is the correct info.
tjl006
02-28-2010, 06:53 PM
thanks for confirming the "or's" zack forgot wich ports were just vacuum and wich were vacuum and boost
Marauder Rick
02-28-2010, 10:21 PM
Thank you...so...what exactly are the ports 1, 3, and 5 on the OE manifold? Are any of these plug n play for the eaton?
FordNut
03-01-2010, 06:08 AM
1 is vacuum to engine control devices such as FRPS, EGR, vapor recovery control. 3 is the pcv valve connection. 5 is vacuum to the brake booster, vacuum reservoir, HVAC. The unseen one under the manifold is for the vapor recovery system purging.
jdenning002
03-01-2010, 10:16 AM
Great info! Thanks!
Marauder Rick
03-01-2010, 05:44 PM
:bows:Where would i be without you guys.:bows: