Big New #'s

[John Nero]

we just got done with the car - i think i found the jet engine

power = 626.43 torque = 695.48 16 lbs of boost
will post graph tomorrow

[bob6364]

NNNNNNNNNnnnnnnnnniiiiiiiiiiii iiiiiiiicccccccccceeeeeeeeeeee eeee!!!!!!!!!!!!!!!!!!!!!!!!!! !!!

[Blown3.8]

Nice numbers. Is that on the juice? You gonna be around this weekend? I might.

[MM03MOK]

:awe: :awe: :awe:

[Glenn]

we just got done with the car - i think i found the jet engine

power = 626.43 torque = 695.48 16 lbs of boost
will post graph tomorrow

WOOOOOOOOOOOOOOOOOW!!!! :banana2:

Good Luck :burnout:

Glenn

[Vortech347]

Is that alot?

I keeed. Bad ass.

[jdando]

Wow! Those are some big numbers. Enjoy the ride :drive:!!

[Marauderman]

Oh Tom......Oh Tom.................ya'll gotta run together and get it on tape...........

[ntd]

:bows:WOW:bows:

Great #'s how much nitrous are you using? I can't wait to see the vid of that beast going down the track, what times you think it will run?

[juno]

Great numbers John!!!

[merc]

Now it's time to put it on the track and get some real numbers.:burnout:

[Pops]

Now it's time to put it on the track and get some real numbers.:burnout:

I agree! Looks great on the dyno. John could you PM me with some info on what you have done. I have not installed my kit yet. I see you have out done me on torque with this set up. You have me wondering about what mine will do now. :D

[Cobra25]

I was able to join him last nite for the dyno. John told the tuner Mark all he wanted was a little over 600 rwhp with a safe tune. After a few adjustments and little effort he was over 600 rwhp. Mark told John he could give him more and it would still be safe, but John declined at this time.

[Zack]

Sweet #'s, congrats.

[Intensity]

Way to represent florida!

[martyo]

That works!

[Blackmobile]

Now How many gallons to the mile do you think you'll get :D ? Wish you would have called, would have loved to have been there.

[massacre]

Those are great numbers, congratulations!

[RR|Suki]

ooo nice, I too am curious if that is with or without juice

[Zack]

ooo nice, I too am curious if that is with or without juice

No TQ number will ever be higher then HP on a Centri car without Juice.

[RR|Suki]

No TQ number will ever be higher then HP on a Centri car without Juice.

Yeah, completely skipped over the tq number, so much for paying attention.

[John Nero]

we ran the car on Q 16 race fuel and 150 shot of nos - if i wish to put a bigger blower on the the motor and fuel system will handle it and more juice no problem - my goal has been to get into the 10's and i think we have enough power to do that now - we plan on racing the car next weekend

[Pops]

Thanks for the info John. You will be in the 10s before me now! Just have to get it to the ground. I have not been able to do that yet!

[CBT]

Thanks for the info John. You will be in the 10s before me now! Just have to get it to the ground. I have not been able to do that yet!
Which car? Or both?

[John Nero]

Nice numbers. Is that on the juice? You gonna be around this weekend? I might.

at the tower shops this friday - and moroso next friday

[2,4shofast]

Wow, those are some amazing numbers! Congrats:beer:

[Blown3.8]

Should run a 10.50 no prob. Can't wait to see some video of it!

[Zack]

Make sure you bring an axle with to the track for when you snap the Mosers at the flange.

[rayjay]

Very nice indeed. Don't let Dom anywhere near it. He'll break it.

[John Nero]

Make sure you bring an axle with to the track for when you snap the Mosers at the flange.

it has a fresh rear in it (all) and i do have an extra axel - think positive

[John Nero]

the dyno sheet
http://www.mercurymarauder.net/gallery/data/500/medium/dyno3.jpg (http://www.mercurymarauder.net/gallery/showphoto.php/photo/17474)

[Zack]

Uh, sumtin' aint right after 5700rpms.

Do you still have the tiny blower as supplied in the kit?

[MarauderTJA]

Now it's time to put it on the track and get some real numbers.:burnout:

She will be in the 10's for sure..........

[MarauderTJA]

Oh Tom......Oh Tom.................ya'll gotta run together and get it on tape...........

We'll get together soon I am sure. Great numbers and I predict mid-10's with John's car:banana2:. He has spent a lot of time and money on his Marauder.

[MarauderTJA]

Hope that is coming soon Johnny boy.................otherwise you'll be kicked off the track after one run below 11.49 et.....and you will be doing much better than that.

[jdando]

Looking at the dyno sheet it looks a little askew. Aren't Torque and HP are suppose to be equal at 5250 rpm by definition?

[bob6364]

Looking at the dyno sheet it looks a little askew. Aren't Torque and HP are suppose to be equal at 5250 rpm by definition?

Not when you"squeeze" it....

[FordNut]

Looking at the dyno sheet it looks a little askew. Aren't Torque and HP are suppose to be equal at 5250 rpm by definition?

Yes. Some tuners let the software auto-scale so the hp and tq scales aren't the same. Some tuners are more savvy and setup the scales so they are the same.

[99SVT]

Looking at the dyno sheet it looks a little askew. Aren't Torque and HP are suppose to be equal at 5250 rpm by definition?

The hp and tq scale is different on the sides of the dyno sheet. The 700tq line is the same as the 600hp line so the rpm #'s won't look quite right.

I would've thought that the hp would keep climbing past 6200 on a centri car. Could just be the nitrous hit in the midrange skewing the curve. I bet she'll be a beast at the track though.

[FordNut]

I would've thought that the hp would keep climbing past 6200 on a centri car.

Depends on the type of blower and the cams.

[jdando]

Not when you"squeeze" it....

I believe you are incorrect.


Yes. Some tuners let the software auto-scale so the hp and tq scales aren't the same. Some tuners are more savvy and setup the scales so they are the same.

That is it. I did not look that closely at the scales. I like having the scales the same.

Yep, I met this would be big fun on the track or the street!!:burn:

[Marauderman]

We'll get together soon I am sure. Great numbers and I predict mid-10's with John's car:banana2:. He has spent a lot of time and money on his Marauder.

Seriously, no joke--should you both decide to do something together, someone really needs to get history on film.....for that's gotta be the coolest thing since Marty's project makeover for that first time event.

If so, I sure would enjoy seeing it--over and over and --you get the idea......

So John, once again, congrats and we will all be waiting or drooling is more like it for this and/or your eventual run,........ period.

[johnnyrauder]

did you rebuild the bottom of the motor

[John Nero]

did you rebuild the bottom of the motor

yes - all new motor (stroker)

[John Nero]

Seriously, no joke--should you both decide to do something together, someone really needs to get history on film.....for that's gotta be the coolest thing since Marty's project makeover for that first time event.

If so, I sure would enjoy seeing it--over and over and --you get the idea......

So John, once again, congrats and we will all be waiting or drooling is more like it for this and/or your eventual run,........ period.

we are going to shake the car out this week - and i have a few little thing to button up - i will be running the car in the next two weeks

[MarauderTJA]

Seriously, no joke--should you both decide to do something together, someone really needs to get history on film.....for that's gotta be the coolest thing since Marty's project makeover for that first time event.

If so, I sure would enjoy seeing it--over and over and --you get the idea......

So John, once again, congrats and we will all be waiting or drooling is more like it for this and/or your eventual run,........ period.

We probably will Tom. If he gets by my 10.40 et, then I fire my baby up real soon. Remember, I just have a little tiny 4.6 :alone: Marauder here. These stroker guys are trying to beat me up:shot:. Cheaters:dunno: