PDA

View Full Version : svt focus pump and BAP


LANDY
03-06-2010, 11:23 AM
i just took out my fuel pump assembly and found a single svt focus pump, everything looks in good shape.
most of you know im running lean at WOT and i have been troubleshooting the problem.
should i go with Just a BAP?
or GT pump and BAP?
Glenn
03-06-2010, 11:27 AM
Critical question is what HP are you running. I run 480 at the track with a BAP and SVT Focus pump with no issues. I would install a BAP as a first step. I would be surprised if the BAP didn't solve your concerns. Many people over fuel pump their MM when it is not needed. If you got money to spend then go with the GT pump.

Glenn Ford :burnout:
Zack
03-06-2010, 11:28 AM
If you are happy with the current power your car is making, you can either run a BAP or hose clamp another Focus pump to the existing assembly and that will give you more fuel then the BAP
LANDY
03-06-2010, 11:36 AM
im also installing my LT's from the other car. i plan to be between 430 and 450rwhp on 93 octane and then get a tune on 100 octane.
i think i might go for the BAP just to have it already.
anybody has one for sale?
20amp or 40amp?
thanks
DOOM
03-06-2010, 07:33 PM
What size injectors are you running?
LANDY
03-07-2010, 06:27 PM
What size injectors are you running?
39#'s. .............
LANDY
03-07-2010, 06:34 PM
well, i took out the cobra manifolds, two cats, and three mufflers.(finally)
installed the LONG TUBES, no cats, and 18" magnaflows. now it will sound the way i like it .
changed the fuel sock for the P#:fs175.
waiting on ams oil to get here soon.
still looking for BAP.
so a 40amp is o.k.
bob6364
03-07-2010, 06:48 PM
well, i took out the cobra manifolds, two cats, and three mufflers.(finally)
installed the LONG TUBES, no cats, and 18" magnaflows. now it will sound the way i like it .
changed the fuel sock for the P#:fs175.
waiting on ams oil to get here soon.
still looking for BAP.
so a 40amp is o.k.

Yes...40amp is ok all you need is a 20amp BAP for a single pump so 40 gives you some headroom.
LANDY
03-08-2010, 06:20 AM
thanks, im buying one today.
LANDY
03-08-2010, 08:15 PM
well they didnt have the 40 amp BAP, so i went with the 20amp instead.
i also ordered a Metco driveshaft loop for safety.
hopefully i have this car up and running by the weekend.
-Matt-
03-08-2010, 09:28 PM
well they didnt have the 40 amp BAP, so i went with the 20amp instead.
i also ordered a Metco driveshaft loop for safety.
hopefully i have this car up and running by the weekend.


Why did you go and do that? The 40 amp is like 20 bucks more.... and i GAVE you the site that had em in stock!! :shake:
LANDY
03-08-2010, 09:48 PM
Why did you go and do that? The 40 amp is like 20 bucks more.... and i GAVE you the site that had em in stock!! :shake:
i know, but i want the car ready by next week.
thanks for the link, but they didnt have them in stock, they said i can have the 20amp in 2 days, or the 40amp in a week, i couldn't wait.