Two screws

[lastdaze04]

Now that I got your attention... I was hoping that someone would help me out with the two screws that hold the fog lights in place . I noticed on my way home tonight that the light kept bouncing up and down so, when I got home I checked and the two screws that hold the drivers side in place were completely gone. If you know what size it is I will go to the hardware store and get some or if you have a couple I will send you a few bucks to cover your time and postage...... I know I could take the ones out on the opposite side but you don't know me :(...Everything I touch turns to doggy doo, so if it ain't broke I don't touch it:help:...
Thanks in advance.:beer:
Rick

[4play]

just find a corse thread screw that looks like will fit... if they fell out they may be stripped so you might want a slightly larger screw.

[FordNut]

Best way to fix it: remove the light and bracket. The light is held onto the bracket by 4 of the exact same screws that hold the bracket to the bumper cover, there's also a push-pin from the bottom of the bumper cover that holds the bracket in place... Then make sure the holes in the bumper cover aren't damaged by test-fitting the screws that attach the light to the bracket. Then go to the hardware store and try to match up a couple of the screws. You won't find an exact match, so maybe get something close and use them diagonally opposite to hold the light to the bracket and use 2 of the original screws to hold the bracket to the bumper cover.