New toys for my rear!

[-Matt-]

You guys have sick minds!!

Heres what i got in the mail today! All true Ford parts!

4:10's... serial number shows "A" som im guessing its the American made ones:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder007.jpg

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder008.jpg


Cobra Trac lock, carbon fiber clutches, 31 spline:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder009.jpg


Freakin huge 31 spine axles:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder004.jpg


And to keep in all inside the case, Ford racing girdle rear cover:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder006.jpg

[Marauder Rick]

Man...U goin all out

[-Matt-]

Man...U goin all out

You should too with the upcoming tourquey ass eaton

[Marauder Rick]

later down the road i may do the trac lock and 31's...but not the 4.10s.

[-Matt-]

later down the road i may do the trac lock and 31's...but not the 4.10s.


Yeah, the 4:10's will go nice with the centri....

[ImpalaSlayer]

ooo those look fun. the 31s really do look much bigger dont they? even though they are only bigger at the end lol

[-Matt-]

ooo those look fun. the 31s really do look much bigger dont they? even though they are only bigger at the end lol

They feel a hell of a lot heavier duty

[dakslim]

You guys have sick minds!!

Heres what i got in the mail today! All true Ford parts!

4:10's... serial number shows "A" som im guessing its the American made ones:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder007.jpg

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder008.jpg


Cobra Trac lock, carbon fiber clutches, 31 spline:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder009.jpg


Freakin huge 31 spine axles:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder004.jpg


And to keep in all inside the case, Ford racing girdle rear cover:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder006.jpg

Damn, Matt...the AF is paying you too much money.;)

[Mr. Man]

What are those other things in with the ring and pinion?

[-Matt-]

Damn, Matt...the AF is paying you too much money.;)

Do it right or dont do it at all ;)

[ImpalaSlayer]

What are those other things in with the ring and pinion?

crush sleve and pinion nut

[dakslim]

Do it right or dont do it at all ;)

Back in '62 we got $83.20 a month...must be better now.:P

[-Matt-]

What are those other things in with the ring and pinion?

The purple thing is the nut for the end of the pinion and the other thing is like a stainless ring or something


Edit....

Yeah that:


crush sleve and pinion nut

[-Matt-]

Back in '62 we got $83.20 a month...must be better now.:P

Yeah just a little bit :P

[-Matt-]

I just have to say a big thanks to Steve @ Tousley Ford.... He killed everyone elses prices by a good bit. Made it so nice to order everything from the same place. Cheap shipping and very fast! Got here in 5 days. Big props to him. Thanks a lot!

[dakslim]

I just have to say a big thanks to Steve @ Tousley Ford.... He killed everyone elses prices by a good bit. Made it so nice to order everything from the same place. Cheap shipping and very fast! Got here in 5 days. Big props to him. Thanks a lot!

MmmmmmMat are you sitting out in your garage looking at all the goodies like a kid on Christmas morn.?;)

[-Matt-]

MmmmmmMat are you sitting out in your garage looking at all the goodies like a kid on Christmas morn.?;)


Yeah my spare bedroom is FULL of parts..... now i got to stop being a chicken and put them all on. :(

[fastblackmerc]

Yeah my spare bedroom is FULL of parts..... now i got to stop being a chicken and put them all on. :(

Sounds like my mods....

BTW... get the stud kit to replace the carrier bearing bolts, less than $30.00, cheap insurance.

[Phrog_gunner]

Care to share what prices they gave you on the parts?

[musclemerc]

Nice toy's Matt, Steve is a good guy and he's patient with you when your ordering, Dont' forget the install kit!

[ctrlraven]

Thread title is very misleading, sounded like you got a new butt plug.

:lol:

[-Matt-]

Dont' forget the install kit!

I was told my the guy that will be putting it all in that i didnt need anything else.

[-Matt-]

BTW... get the stud kit to replace the carrier bearing bolts, less than $30.00, cheap insurance.

Please show me what your talking about (link?)

[-Matt-]

Care to share what prices they gave you on the parts?

PM'd







The message you have entered is too short. Please lengthen your message to at least 10 characters.

[DOOM]

Do it right or dont do it at all ;)

Thats what she said. :( :depress: :shake: :alone:

[fastblackmerc]

Please show me what your talking about (link?)

I looked for the kit in the latest FRP catalog, couldn't find it.

Found it here.....

http://www.lethalperformance.com/03-04-svt-cobra-suspension-solid-axles-c-16_277_1130/ford-racing-96-04-mustang-8-8-ford-bearing-cap-stud-kit-p-5526

[LeoVampire]

InnovativeInterceptors.com


8.8" Stud Kit recommended use with Girdle Cover Part #: INT07Shttp://www.innovativeinterceptors.com/images/spacer.gifThis kit provides studs for increased retention of the differential caps on 8.8'' Ford and Dana 60 axles. They were designed for use with the M-4033-G girdles but can be used with the stock covers
Stud kit M-4034-A recommended for 8.8" and Dana 60

Ford Racing 8.8 Stud Kit
Qty: Price: $20.00



http://www.innovativeinterceptors.com/images/M4034A.jpeg

[stryker]

You guys have sick minds!!

Heres what i got in the mail today! All true Ford parts!

4:10's... serial number shows "A" som im guessing its the American made ones:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder007.jpg

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder008.jpg


Cobra Trac lock, carbon fiber clutches, 31 spline:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder009.jpg


Freakin huge 31 spine axles:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder004.jpg


And to keep in all inside the case, Ford racing girdle rear cover:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/marauder006.jpg:burnout:I need to do that mod too but not 4.10 i think 3.55 is good what you think ?

[fastblackmerc]

:burnout:I need to do that mod too but not 4.10 i think 3.55 is good what you think ?

3.55 are a waste of money.

[LeoVampire]

3.55 are a waste of money.

He has a Grand Marquies which would have 3.33's in it so it would be a nice over all improvment for the car and still a good cruise mobile in Puerto Rico where he live's.

[-Matt-]

I looked for the kit in the latest FRP catalog, couldn't find it.

Found it here.....

http://www.lethalperformance.com/03-04-svt-cobra-suspension-solid-axles-c-16_277_1130/ford-racing-96-04-mustang-8-8-ford-bearing-cap-stud-kit-p-5526


I was told by steve that the reason FRPP doesnt sell them anymore is because they found out that they dont make a difference in anything and the studs that come with them are plenty good'

[Marauder Rick]

hey Matt... Les see a pic of that Room-O-Goodies.

[-Matt-]

hey Matt... Les see a pic of that Room-O-Goodies.

lol ok.... let me get some laundry done and ill shoot some pictures....

[RacerX]

Nice toy's Matt, Steve is a good guy and he's patient with you when your ordering, Dont' forget the install kit!
Matt, I think he meant this install kit:
http://www.1fordracing.com/parts/part_details.asp?PartKeyField= 5957
You have the pinion nut and crush sleave I see. Did you get new bearings, races, seals, etc.

[Black_Out]

3.55's are a waste of money, get 373s

still good for cruising, but you will notice a difference off the line. I don't think you'll be happy going from 3.23 to 3.55

[musclemerc]

Matt, I think he meant this install kit:
http://www.1fordracing.com/parts/part_details.asp?PartKeyField= 5957
You have the pinion nut and crush sleave I see. Did you get new bearings, races, seals, etc.

Yeah Matt, that's it. Summit makes a kit too and it's chaeper.

[-Matt-]

Yeah Matt, that's it. Summit makes a kit too and it's chaeper.


My installer said he will have all that stuff for me.

[Mr. Man]

I see you can get some wild ratios like 4.30, 4.56 and even 5.11 for an 8.8. I know some guys have tried the 4.30's anyone ever try anything higher or is it lower?

[babbage]

My installer said he will have all that stuff for me.

Cool Matt, when is it going in? Remember to take it easy for first 500 miles. No constant speeds for extended periods (over 1 hour) and such.

Break them in with regular dyno oil then switch to full synth. See what your installer thinks...

[-Matt-]

Cool Matt, when is it going in? Remember to take it easy for first 500 miles. No constant speeds for extended periods (over 1 hour) and such.

Break them in with regular dyno oil then switch to full synth. See what your installer thinks...


hopefully within the next couple of weeks

[CBT]

Most misleading title eva award goes to.....MATT

[-Matt-]

Most misleading title eva award goes to.....MATT


It was titled like that to make sure you would read it! ;)

[DOOM]

Matt looking forward to seeing the car when it's complete!

[-Matt-]

Matt looking forward to seeing the car when it's complete!


Ill be at MV... see ya there!

[dakslim]

It was titled like that to make sure you would read it! ;)

You will definitly get CBT's attention with title like that. Groan.:eek:

[FormulaMarauder]

3.55's are a waste of money, get 373s

still good for cruising, but you will notice a difference off the line. I don't think you'll be happy going from 3.23 to 3.55

Don't bother putting anything in the rear unless it's 4.10 or 4.30. Anything else and you won't notice a damn thing, trust me, I've driven them all.

4.10's are perfect all around driving, great in city, just fine on highway.

[CBT]

lol ok.... let me get some laundry done and ill shoot some pictures....

That's what she said.

[knine]

That's what she said.
http://www.youtube.com/watch?v=q-wf2pP7T0Y

[RacerX]

Hey Matt! What axles are those and where'd ya get em? Thanks!

[-Matt-]

Hey Matt! What axles are those and where'd ya get em? Thanks!

05 and newer Panthers have the 31 spline axles.. those are for a CV. I got em from steve from tousley ford... info on first page

[Joe Walsh]

3.55 are a waste of money.


He has a Grand Marquies which would have 3.33's in it so it would be a nice over all improvment for the car and still a good cruise mobile in Puerto Rico where he live's.


3.55's are a waste of money, get 373s

still good for cruising, but you will notice a difference off the line. I don't think you'll be happy going from 3.23 to 3.55


Don't bother putting anything in the rear unless it's 4.10 or 4.30. Anything else and you won't notice a damn thing, trust me, I've driven them all.

4.10's are perfect all around driving, great in city, just fine on highway.


He's talking about a 2V Grand Marquis with, at best, 3:27 gears in the diff.
I think that the 3:55s would be fine...3:73s at most,
especially considering that he has a 2V engine which is not a high-revver like our 4V engines.

BTW: Nice rear end fortification kit!
:2thumbs:

[Joe Walsh]

Thread title is very misleading, sounded like you got a new butt plug.

:lol:


Most misleading title eva award goes to.....MATT


It was titled like that to make sure you would read it! ;)


You will definitly get CBT's attention with title like that. Groan.:eek:

LOL....I must be a 'perv' too!
When I read the thread's title, I was like...:hmmm:

[-Matt-]

BTW: Nice rear end fortification kit!
:2thumbs:

Thanks and yeah i hope that it gives me some peace of mind for back there.


LOL....I must be a 'perv' too!
When I read the thread's title, I was like...:hmmm:

I like how you opened this thread so quickly then! :rolleyes:

[RacerX]

Thanks. I didn't see a part#. Is it 5W1Z4234A/6W1Z4234A ?

[-Matt-]

Thanks. I didn't see a part#. Is it 5W1Z4234A/6W1Z4234A ?

For what?...

[-Matt-]

Got more stuff today! Yay!

My new heat exchanger and trans cooler:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/2010-03-30230448.jpg

And my meth injection kit:

http://i13.photobucket.com/albums/a254/xxshowstoppaxx/2010-03-30230458.jpg

[Mr. Man]

I must have missed the initial MMatt's car thread. It looks like there are a lot of parts scattered about there. Is your MM drivable or do you have it all ripped apart?

[-Matt-]

I must have missed the initial MMatt's car thread. It looks like there are a lot of parts scattered about there. Is your MM drivable or do you have it all ripped apart?


Lol it drives, mostly stock though

Here are some of the other parts that you see:

http://www.mercurymarauder.net/forums/showthread.php?t=61201

[Mr. Man]

Somewhere Matt there is a fire engine with out any paint:lol:

[-Matt-]

Somewhere Matt there is a fire engine with out any paint:lol:


Duh, why do you think i drive it? Picture related... its me:

http://blogpig.co.uk/pics/2008/02/fireman-03.jpg