View Full Version : Fed Up
03blackmerc
04-01-2010, 12:10 PM
ok finially am Fed up with my headlights. i've been having the problem where they keep turning on and off at random. i put a bandaid on the problem by making an eraser to keep the highbeam switch on, but its time to fix it before the summer. i think what i need is the four relays in the LCM. i was hoping someone has some detailed pics on the location and how to remove and replace the relays. any info would be greatly apreciated.
Thanks
SILVERSURFER03
04-01-2010, 12:12 PM
search lcm repair and or pm fastblkmerc he's the man on rebuilds
SC Cheesehead
04-01-2010, 12:23 PM
search lcm repair and or pm fastblkmerc he's the man on rebuilds
+1, you only need one relay to repair, and FBM is THE MAN when it comes to doing HD relay retrofits on LCMs.
However, if you want to DYI, here's a linky:
http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1159835&fpart=1
musclemerc
04-01-2010, 01:16 PM
^^^ What they said... Fastblackmerc!
SWOOSH
04-01-2010, 01:19 PM
I concur had it personally done by FastBlack and no issues at all!
fastblackmerc
04-01-2010, 02:09 PM
PM me for details.
Ktorres1
04-06-2010, 09:58 PM
He's that good!
SC Cheesehead
04-07-2010, 04:07 AM
He's that good!
Heck, he's better than that good! :D
1time
04-09-2010, 11:29 AM
Fastblackmerc is the man!!!!!!!!!!!!!!!!!!!!!!!!!1
He's that good!
That's what she said!!! ;)
Reek09
04-09-2010, 12:06 PM
I did the LCM repair also. Its fairly easy, just a little patience, a bigger relay, a soldering iron, some wire and you can do it yourself.
Granite
04-09-2010, 12:47 PM
Fastblackmerc hooked me up! go for it! never to be worried about again
fastblackmerc
04-09-2010, 02:04 PM
ok finially am Fed up with my headlights. i've been having the problem where they keep turning on and off at random. i put a bandaid on the problem by making an eraser to keep the highbeam switch on, but its time to fix it before the summer. i think what i need is the four relays in the LCM. i was hoping someone has some detailed pics on the location and how to remove and replace the relays. any info would be greatly apreciated.
Thanks
You only need one relay replaced in the LCM. Send it to me. I just repaired and shipped another back to a member today.
Blk Mamba
04-09-2010, 03:14 PM
Yes, and I'm hoping to have it Mon., then he gets my EATC to play with.
bob6364
04-09-2010, 06:37 PM
a relay a socket some beer a soldering iron some solder...did I say beer? and your good to go....and don't forget the BEER!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.