PDA

View Full Version : J-mod on 4R75W


dohc324ci
05-20-2010, 06:07 AM
I am looking to have the J-mod done on the trans since it's still out. Anyone have it done on the 4R75W?

Thanks!
fastblackmerc
05-20-2010, 06:14 AM
Should be no issues as the tranny is almost identical to the 4R70RW.
ntd
05-20-2010, 06:36 AM
use this it works with the 4r70 or 4r75

http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1152107&page=1#Post1152107
Zack
05-20-2010, 06:49 AM
When is it gonna sink in the two versions are 99.9% identical?
Krytin
05-20-2010, 09:27 AM
Most likely never! LOL
dohc324ci
05-20-2010, 10:00 AM
Trust but verify chief. The document reference states "they don't know if it was still applicable the the 4r75w. Hence just needed to verify with this thread.
ntd
05-20-2010, 10:06 AM
Trust but verify chief. The document reference states "they don't know if it was still applicable the the 4r75w. Hence just needed to verify with this thread.


Yep I did it to my 4r75 and a few others all the steps are correct.
dohc324ci
05-20-2010, 10:17 AM
Thanks NTD finally something of value...lol....j/k

Thanks all for the input.

I think it will "sink in" when we have appropriate sticky's of commonly asked questions. I moderate a NorCal Mustang site and it helps keep these sorts of questions from appearing every other week.
Seneca
05-20-2010, 07:32 PM
did my 4r75 also.
DOOM
05-20-2010, 10:32 PM
did my 4r75 also.

You did mine as well! :D
dohc324ci
05-20-2010, 10:36 PM
Spoke to Vendicated today and there trans guy has done a dozen or so. Needless to say while the trans/motor is out the J-Mod is gettin done. Thanks for the input fellas!
DOOM
05-20-2010, 10:42 PM
DOOM approved! :2thumbs: