PDA

View Full Version : PCV valve bolts


RR|Suki
06-03-2010, 12:30 PM
Anyone out there know the size of the bolts for the Passenger side pcv valve? I'm finally getting around to putting mine back together and it seems I've lost 1 bolt :shake:
Zack
06-03-2010, 12:47 PM
Anyone out there know the size of the bolts for the Passenger side pcv valve? I'm finally getting around to putting mine back together and it seems I've lost 1 bolt :shake:

Its a sheet metal screw :rolleyes:
Egon Spengler
06-03-2010, 12:54 PM
You can go down to your local parts store and have them help you match it up!
RR|Suki
06-03-2010, 12:56 PM
Its a sheet metal screw :rolleyes:

Well I know it looks to be a sheet metal screw with a blunt end, but I figured if I knew the specific size with the blunt end ford used on the car I could just order a couple and be done with it. Instead of getting some from home depot and cutting the ends off them. Not all of us have a garage with an angle grinder handy :P
ImpalaSlayer
06-03-2010, 01:04 PM
Well I know it looks to be a sheet metal screw with a blunt end, but I figured if I knew the specific size with the blunt end ford used on the car I could just order a couple and be done with it. Instead of getting some from home depot and cutting the ends off them. Not all of us have a garage with an angle grinder handy :P

got a set of files>?
RR|Suki
06-03-2010, 01:21 PM
You can go down to your local parts store and have them help you match it up!

Parts store no. Home Depot yep


got a set of files>?

nopers, not even a hacksaw. Living in an apartment has made it so that I only keep the things I use rather often. If no one knows what the actual thing's size is I'll just end up buying a hacksaw or something and cutting some from home depot. Just don't need a hacksaw for anything else, so I was trying to avoid buying one just to cut some 99c screws
ImpalaSlayer
06-03-2010, 01:23 PM
i really have no idea what size they are
-Matt-
06-03-2010, 01:48 PM
i just brought mine to a fastenal around me and got them in stainless.... i could send you a (stock) set if you want.
RR|Suki
06-03-2010, 03:30 PM
i just brought mine to a fastenal around me and got them in stainless.... i could send you a (stock) set if you want.

Figures Fastenal would have em, went over there after work and they close at 5 :lol:. Good lookin out on the offer man, but it's all good I can make time to go out to fastenal during lunch one of these days. Just being lazy and wanted to order some online :D