Let the fun begin!!! Eaton #??

[swordfish]

Well last night we got started.:banana: Taking it apart went smooth and quick. I only had 1 knock sensor is this normal?

[justbob]

Yes, 03's only have one, but both boss's need to be ground down. Good luck, and have fun!

[SmokdMercRauder]

Where that crossover tube from?? It lQQks already fabbed did you do it?

[swordfish]

Where that crossover tube from?? It lQQks already fabbed did you do it?

It's from Dave.
http://www.mercurymarauder.net/forums/showthread.php?t=61361&highlight=swordfish

[dohc324ci]

NICE. Good luck with the install!

[SmokdMercRauder]

Good stuff man.. Looking good..have fun..we are here for ya! And waiting for more pics...lol

[musclemerc]

Looking good Swordfish!

[ImpalaSlayer]

lookin good man, feel free to give me a ring if need be

[ImpalaSlayer]

oh yeah, whats that white wagon wheel on?

[breeze]

good luck man!

[swordfish]

oh yeah, whats that white wagon wheel on?

Bronco I'll send you some pictures!

[DOOM]

Git er done! :burnout:

[burt ragio]

What combination pulleys & fuel pumps are you going to use ? Keep the pics comming.

[swordfish]

What combination pulleys & fuel pumps are you going to use ? Keep the pics comming.

I have a 2lb lower 2.9 upper. GT fuel pump with a BAP. I had the 2 pumps Then Zack told me go with 1 and the BAP. I haven't worked on the car sense fri. I Worked 12 hr shift sat, sun, mon. Well sunday ended up being 15 hrs. I'll be back in the shop tonite. I have the SC on. I spent about 3 hours making the heat exchanger brakets. I'll put up pictures tonite or 1st thing in the morning.

[ImpalaSlayer]

very nice, thats alota pulley for a stocker though, may wana think about a bigger upper. i have a stock cobra upper if you want it.

[swordfish]

very nice, thats alota pulley for a stocker though, may wana think about a bigger upper. i have a stock cobra upper if you want it.

I'm trying to keep my hood installition. If I have to I'll change out the bottom for a -1. My tuner said there are a couple of mach 1 running that same set up with out any issues.

[ImpalaSlayer]

I'm trying to keep my hood installition. If I have to I'll change out the bottom for a +1. My tuner said there are a couple of mach 1 running that same set up with out any issues.

you will probably make 14+ psi. i have a 2lb lowe and 3.1 upper and made 14

[swordfish]

you will probably make 14+ psi. i have a 2lb lowe and 3.1 upper and made 14
That is what he was thinking about 14lbs.

[swordfish]

Well tonite we got the heat exchanger mounted, battery relocated, and the pump mounted. here are the pictues.
2114221143
2114421145
2114621147

[swordfish]

2114821149
2115021151
2115221153

[swordfish]

2115421155
2115621157
2115821159

[DTUB]

Looking good Mark, and keep the pics coming... :coolman:

[SmokdMercRauder]

I have a 2lb lower 2.9 upper. GT fuel pump with a BAP. I had the 2 pumps Then Zack told me go with 1 and the BAP. I haven't worked on the car sense fri. I Worked 12 hr shift sat, sun, mon. Well sunday ended up being 15 hrs. I'll be back in the shop tonite. I have the SC on. I spent about 3 hours making the heat exchanger brakets. I'll put up pictures tonite or 1st thing in the morning.

I ran the 3.0 upper and stock lower..The car made 13psi

[burt ragio]

Looking real sweet keep the photos coming. Yes that is a LOT of pulley.
Are you using a center ring between the balancer & lower hub ?
What motorcraft battary are you useing ?

[Zack]

Do you have adapters for those injectors?

Also, I suggest you open up those holes in the plastic for the hoses to pass through....it will slice right through the hoses being that small with vibration.

Looks great!

[guspech750]

Baaaaaaaaaaad aaaaaaaaaaaaaass!!!

[justbob]

Looking really good Mark! Now who lent out their certain binder as seen in one of the pics.....busted.:eek:

[LANDY]

nice, clean install. keep the pics coming

[ImpalaSlayer]

Looking really good Mark! Now who lent out their certain binder as seen in one of the pics.....busted.:eek:

i saw that too haha.

[swordfish]

Do you have adapters for those injectors?

Also, I suggest you open up those holes in the plastic for the hoses to pass through....it will slice right through the hoses being that small with vibration.

Looks great!

I looked at the adapters but ended up getting a harness from a lighting and soldering the new ends.

Zack Thanks I'm going to run the hose's tomorrow i'll open them up some and look at putting something around the holes.

[swordfish]

Looking real sweet keep the photos coming. Yes that is a LOT of pulley.
Are you using a center ring between the balancer & lower hub ?
What motorcraft battary are you useing ?

I used a complete lower pulley kit from metco check out eaton swap part list. I got mine used.

The battary is a group 58 motorcraft.

[swordfish]

I worked on the car a little last night. Due to work and getting ready to go out of town I have not had time to work on the car. Here is a picture where I am now. hopefully I can work on it again before I leave this weekend. Took the picture from my phone so hope you can see it.
http://sn101w.snt101.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=ed7b4255-8940-11df-8461-001e0bcb3356&Aux=14|0|8CCEB64D31E42B0||

[CobraSVT657]

Looking good :beer:

[1stMerc]

Good looking install. Good luck with the completion.

[SC Cheesehead]

Looking good, bubba!

Check your e-mail when you get a chance, sent you some info today.

[swordfish]

Got back in the shop tonite. I decided to do a coulpe of thinks different and had to wait on some parts to comeback from the coating shop. Also I wasn't happy with the coil covers and the tensioner. So I changed them around.

[1stMerc]

Larger pictures please. Looking good from what i can see.

Missed you at MV VIII

[justbob]

Lookin good Mark!

[swordfish]

Think I got it. Try this and see if it's any larger.

[TFB]

Yeah that's a really nice job, you'll have a blast when you hit the street...

[1stMerc]

Think I got it. Try this and see if it's any larger.

That's the ticket. Much better. You've really been busy.

[Motorhead350]

Galls? LOL I know what they sell!

[musclemerc]

All that, and a functioning PCV system....

Very nice work Mark!

[MOTOWN]

i just looked over your thread! thats a 100% kick ass swap

hmmmmm got me thinkin................

[SC Cheesehead]

i just looked over your thread! thats a 100% kick ass swap

hmmmmm got me thinkin................

Check out:

http://www.mercurymarauder.net/forums/showthread.php?t=60366

If you're patient and take your time collecting parts, you can do an Eaton swap for $3,500 or less.

[CBT]

Check out:

http://www.mercurymarauder.net/forums/showthread.php?t=60366

If you're patient and take your time collecting parts, you can do an Eaton swap for $3,500 or less.

How much is yours :cool:

[SC Cheesehead]

How much is yours :cool:

"If you're patient and take your time collecting parts, you can do an Eaton swap for $3,500 or less."

[MOTOWN]

Check out:

http://www.mercurymarauder.net/forums/showthread.php?t=60366

If you're patient and take your time collecting parts, you can do an Eaton swap for $3,500 or less.

ive been going over that very thread for a few nights now, i just may start gathering parts, i realy like the idea of sourcing out my own kit!

what would say is the going price for a 112, and lower intake?

[swordfish]

[QUOTE=motown marauder;973811]i just looked over your thread! thats a 100% kick ass swap


Thanks! The main thing is take your time. Mine has taken a little longer but I have made all my brakets and wanted them to look like factory. Then send them out for powder coating.

[SC Cheesehead]

ive been going over that very thread for a few nights now, i just may start gathering parts, i realy like the idea of sourcing out my own kit!

what would say is the going price for a 112, and lower intake?

$300 each for the M112, the lower intake manifold, and the intercooler. If the intercooler has the inlet adapter included, expect to pay $50 - $100 more.