Oil Gauge Sensor Part#?

[MercOut]

Hey,

Does anyone have the part # for the autometer oil sensor and where to buy it from? Some mysterious way mine broke off:shake:. I know for a fact the oil sensor autozone sales isn't the right one.

And yes its the real gauge

Thanks

[RacerX]

http://www.autometer.com/cat_accessoriesdetail.aspx?vid =24
I got mine at Autozone for $26? Just the sender. Guy had to go through the autometer catalog though. Product # 2242

[MercOut]

Thanks, I'll try Autozone again but they keeping pulling up the plastic oil sensor but now i have a part number

[fastblackmerc]

Do a google search for "autometer 2242". Many places have them for sale.

[merc]

Thanks, I'll try Autozone again but they keeping pulling up the plastic oil sensor but now i have a part number

Speed Unlimited. It's in your backyard.

[MercOut]

I installed the sensor...I guess. The meter is still reading 100psi and doesnt move. Maybe i installed it wrong, right now its connected to the engine with nothing connected to the opposite end where the nut and threads are.

[musclemerc]

Huh? You lost me

[fastblackmerc]

I installed the sensor...I guess. The meter is still reading 100psi and doesnt move. Maybe i installed it wrong, right now its connected to the engine with nothing connected to the opposite end where the nut and threads are.

Dude....

Are you serious? :dunno: :dunno: :dunno:

How do you think the gauge will work without a connection to the sending unit?

[MercOut]

lol...sorry if im not using the correct terms...This is the sensor i bought (http://www.fixthisride.com/showproductdetail.jsp?prod_id= 33170). i installed it but my meter still goes to 100psi

[fastblackmerc]

lol...sorry if im not using the correct terms...This is the sensor i bought (http://www.fixthisride.com/showproductdetail.jsp?prod_id= 33170). i installed it but my meter still goes to 100psi

OK, looks like the right one.

It's screwed into the port and a wire gets connected to the terminal on the top.

[MercOut]

OK, looks like the right one.

It's screwed into the port and a wire gets connected to the terminal on the top.

Thats the part im missing! I want to say you're talking about the battery terminal but i don't want to guess. i connect a wire to the sensor and the other end to the terminal?

Thanks

[musclemerc]

Yes, the sending unit screws into the engine block and the terminal on the sending unit goes back to the guage

[MercOut]

Yes, the sending unit screws into the engine block and the terminal on the sending unit goes back to the guage

Just have to find the wire that goes to the gauge, thanks....Again. Damn you help me a lot lol

[RacerX]

You should be able to find the ring connector pretty easy. It can't go far because the wrapped sensor wiring is attached to the block on their way up the side.

[musclemerc]

This is the way it should be on this site. PM me anytime with any question, if I don't know the answer, I will definatelly find one for you.

Good Luck on the repairs.


Just have to find the wire that goes to the gauge, thanks....Again. Damn you help me a lot lol