K&N filter question

[CBT]

I don't like the chrome cap on the end of the K&N filter. Since it is pointed almost directly at the hole where the stock box drew air from, it doesn't take a geneus....geeni...a ****ing smart person, to figure out that cap must be blocking some air from entering. The end of the filter on the JLT was, well, it WAS a filter. Does anyone running a K&N have a filter that is NOT capped at the end? And if so where did you get it?

[CBT]

No one? Come on, it's been three minutes since I posted the question.:mad2:

[03blackmerc]

i have the same filter, kinda regreting not getting a JLT, im sure if you look on the K&N website and find a filtered end with the same opening size.

[justbob]

A blue for you? :)
http://www.amazon.com/Spectre-8136-Cone-Air-Filter/dp/B00062ZGOM

Any 3 1/2" x whatever will work for you.

[CBT]

A blue for you? :)
http://www.amazon.com/Spectre-8136-Cone-Air-Filter/dp/B00062ZGOM

Any 3 1/2" x whatever will work for you.

Oh snap, nice! Friggin' cheap, too!:beer:

[Mr. Man]

So now you don't like Chrome?!.. Can't wait til Doomie wakes up and rips you a new one:D

[cougar9150]

The K&N filter (RF-1041) that comes with the kit has a 6" diameter inlet flange. K&N doesn't make a X-Stream filter (with the open end) with the 6" flange.

Summit shows several other companies that have the same diameter inlet flange and an open end like the X-Stream filters. You will just have to decide on the other dimensions as there doesn't seem to be any direct dimensional matches to the K&N RF-1041 filter.

[CBT]

So now you don't like Chrome?!.. Can't wait til Doomie wakes up and rips you a new one:D

Well roll over and tap him on the shoulder.

[CBT]

Unfortunately the K&N filter (RF-1041) that comes with the kit has a 6" diameter inlet flange. K&N doesn't make a X-Stream filter (with the open end) with the 6" flange.

Summit shows several other companies that have the same diameter inlet flange and an open end like the X-Stream filters. You will just have to decide on the other dimensions as there doesn't seem to be any direct matches to the K&N version.

Hmmm....rats. Thanks, tho. I wonder if the JLT filter would work??

[cougar9150]

Hmmm....rats. Thanks, tho. I wonder if the JLT filter would work??

There are some that are fairly close you just need to decide on the top diameter, bottom diameter, and length. Mostly any will work as long as they are not smashing into anything.

Check out this link to Summit and then select the other dimensions you want.
http://www.summitracing.com/search/Department/Air-Fuel-Delivery/Section/Air-Filter-Elements-Wraps/Part-Type/Air-Filter-Elements/Universal/Yes/Air-Filter-Style/Conical/Inlet-Flange-Inside-Diameter-in/6-000-in/?Ns=Rank|Asc (http://www.summitracing.com/search/Department/Air-Fuel-Delivery/Section/Air-Filter-Elements-Wraps/Part-Type/Air-Filter-Elements/Universal/Yes/Air-Filter-Style/Conical/Inlet-Flange-Inside-Diameter-in/6-000-in/?Ns=Rank%7CAsc)

[Mr. Man]

Well roll over and tap him on the shoulder.
:eek: I'm telling Paula on you!!:P

[musclemerc]

I don't think the cap is gonna make a real diffrence. I would consider closing the box in with some ABS plastic and connect to the stock intake area for a true CAI. I've been working on one for myself and have considered swapping to a smaller filter. I have a JLT maybe later after i'm done we could swap, my filter is in perfect shape

[CBT]

:eek: I'm telling Paula on you!!:P

Hang on...(CBT rolls over.....)

KAPOW!!

[CBT]

I don't think the cap is gonna make a real diffrence. I would consider closing the box in with some ABS plastic and connect to the stock intake area for a true CAI. I've been working on one for myself and have considered swapping to a smaller filter. I have a JLT maybe later after i'm done we could swap, my filter is in perfect shape

Yes, yes....the wheels in my head have turning on this also. Everytime I pop the hood, I just do not like how it is set up. AND, i miss the noise of the JLT when you blip the throttle. :(

[Mr. Man]

Hang on...(CBT rolls over.....)

KAPOW!!
long reach ...remember in your sick twisted fantasy Doomie and I are in between:puke:

[CBT]

long reach ...remember in your sick twisted fantasy Doomie and I are in between:puke:

Man, that would be one BIG freakin' sammich. :P

[Egon Spengler]

And I am the one getting yelled at for vulgarity...

[Colt]

I dont think performance wise one would gain by having an open front on the filter. It might mess up air flow for the MAF and if you have a stock TB and factory exhaust, you might not need to flow more air.

My Mustang and the drop in K&N I used on it both had the front with a device to block air at the front and make the filter suck the air in more than ram the air in. I think its more for the MAF. Same on the cone style K&N filter (and Harley made foward facing cones) for my Harley, the filter faces the wind in the open, but the front is capped so you dont get a real ram air effect.

Now if you exhaust is opened up, then it might work. At one time with Mustangs people would rotate the MAF to try and correct issues, along with trim some of the extra support inside the MAF that restricted air flow.

[ctrlraven]

Changing the filter is not going to make any difference. Just keep your K&N filter clean and it will perform just fine.

[fastblackmerc]

changing the filter is not going to make any difference. Just keep your k&n filter clean and it will perform just fine.

+1............

[justbob]

They don't have a 3 1/2" mount? My bad.

[Mr. Man]

Man, that would be one BIG freakin' sammich. :P
:hmmm: hmmmmm..big freakin' sammich:drool:....time for lunch. Thanks for the idea:thinker: