F.I.T. contact?

[Motorhead350]

What happened to these guys that sold me my supercharger? I have been looking for them on-line and all I can find are youtube clips. :mad:

I need a 90 degree elbow piece and Procharger sent me the wrong one. Procharger also said they do not have any pipe that goes from 3.5 inches to 4 unless it's a straight pipe, which does me no good.

I know of two other sources to get the pipe, but I would like it from the original people if possible, If I cannot contact them I will order from one of two places Zack pointed out to me. For the next day or two I would like to hunt for the original.

Any idea where I can contact these guys?

Thanks.

[MM03MOK]

Greg skipped town, owing us money. I wouldn't waste my time trying to find him. He wouldn't help if you did find him. He burned a lot of bridges. Greg customized the kit for the Marauder and obviously had parts made that aren't in a standard ProCharger kit. You'll need to do the same thing. Follow Zack's advice.

[Motorhead350]

Thanks for cutting to the chase. That's a shame.

[RoyLPita]

PM John Nero. He bought some original pipe from ProCharger Kit #1. Maybe he has what you are looking for.

[Zack]

Dom, are you in need of the 90 degree elbow from the inlet pipe to the blower?

You buy a 4" elbow from turbohoses.com or siliconeintakes.com and tell them you want a reducing sleeve to match the blower's inlet I.D.

[Local Boy]

Just get silicone reducer connectors...
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=22 120&stc=1&d=1281028322
Aloha

[RoyLPita]

Just get silicone reducer connectors...
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=22 120&stc=1&d=1281028322
Aloha

Dom,
It will come at a price. You'll have to fly there to retrieve them. :D

[fastblackmerc]

Dom,
It will come at a price. You'll have to fly there to retrieve them. :D

Will they let him on any of the islands?

[Motorhead350]

Dom, are you in need of the 90 degree elbow from the inlet pipe to the blower?

You buy a 4" elbow from turbohoses.com or siliconeintakes.com and tell them you want a reducing sleeve to match the blower's inlet I.D.

Sounds like that exactly what I need to do. Yup that is the exact piece I need.

Local Boy, how well has that material held up? I know it's like four times as much money so I would hope it's four times as good quality. Was there a whole kit you could buy for a Procharged Marauder? I noticed the nice clamps too. The websites Zack pointed out once again have those clamps too. Local Boy I wish you could tell me if those silicon pieces work well in winter or if the weather from winter to summer makes them crack... we have different winters than you though.

Thanks guys. I have some calls to make and an order to place.

Fastblackmerc, I am sure they will let me on the islands, but I'll be asked to drive home.

[Seneca]

Hey Dom. Silicone Hoses hold up great in hot and cold temps.. they're on most all our big trucks at work. the only issue is..if you have any rubbing anywhere they rub thru rather quick. but as long as everythings tied up real nice rubbing not be a problem and they should last a very very long time.. P.S. I like those Local Boy! I can see them in my future. :D

[Local Boy]

Thanks Guys!

As Seneca said, they hold up very well...The rubber ones stretch out in time, and leak pressure...The band clamps are MUCH better than the worm type.

No worries Dom...Come on dowm to the islands, I'm sure you'll have a good time...may not want to leave...;)

Aloha