Mach 1 Shaker

[wht02lightning]

Hey guys I want to do something that i havent seen. i want to get the Mach 1 Shaker system and put it on my MM. Im wondering if anyone has done this or knows where I can get the parts.

[ImpalaSlayer]

its going to look lost on the mm hood, source parts from mustang forums

[wht02lightning]

its going to look lost on the mm hood, source parts from mustang forums

I dont think it would look bad as long as I use the CDC black plastic piece that goes on the stang hood, raises the surrounding area like the Mach 1 hood, im sure fittment would have to be worked out but I think it would look good

[gdmjoe]

.
As ImpalaSlayer noted, the modern era Mustang shaker hood scoop is WAY too small for the size of the hood.

Even the late '60s / early '70s Mustang -AND- Torino ( which was larger than that of the Mustang ) would be WAY too small.

Possible (?) alternative .....

http://www.gdmjoe.com/engine/hemishakerscoop.jpg
*After-market MoPar hemi' offering. Several years ago RIDES featured an Expedition that Christopher Titus put on one.
.

[Mr. Man]

.
As ImpalaSlayer noted, the modern era Mustang shaker hood scoop is WAY too small for the size of the hood.

Even the late '60s / early '70s Mustang -AND- Torino ( which was larger than that of the Mustang ) would be WAY too small.

Possible (?) alternative .....

http://www.gdmjoe.com/engine/hemishakerscoop.jpg
*After-market MoPar hemi' offering. Several years ago RIDES featured an Expedition that Christopher Titus put on one.
.
Was going to mention the above as I saw it on a Magnum and it looked awesome.
Before cutting holes in your hood though you might photoshop a pic and see if it is the direction you want to go.

[guspech750]

Funny.I was thinking what that would look like on a MM just a few weeks ago too.

[Big Black Beast]

I would probably just go with the cowl induction thingy...
Would true ram air require a tune? Anybody know?

[fastblackmerc]

I would probably just go with the cowl induction thingy...
Would true ram air require a tune? Anybody know?

Prolly not....

[SC Cheesehead]

I would probably just go with the cowl induction thingy...
Would true ram air require a tune? Anybody know?


Prolly not....

If you have a CAI, pull the driver's side headlight and you'll have a "poor man's" version of ram air.

The cowl hoods look sharp. Ladyhawke, jamestang, and a couple other folks have them, PM them for photos.

[SID210SA]

There was someone that did the TransAm scoops on the side....looked real sharp...but it was alot of work IIRC. I would go that route if you can find the parts.

[gdmjoe]

SID210SA - There was someone that did the TransAm scoops on the side....looked real sharp...but it was alot of work IIRC.
And mucho $$$$$

http://www.gdmjoe.com/exterior/mmwithfenderscoop01.jpg

http://www.gdmjoe.com/exterior/mmwithfenderscoop02.jpg


I would go that route if you can find the parts.
Other thoughts .....

http://www.gdmjoe.com/exterior/2007interceptorfendervent.jpg
*2007 Interceptor concept. My personal preference, however, to the best of my knowledge - UNATTAINABLE *sigh*

http://www.gdmjoe.com/exterior/cervinisfendervent.jpg
*Cervini's fender vent - F150.
.

[Rocknthehawk]

the mach1 shaker has been done. can't remember who, but they posted pics on this forum.

[ctrlraven]

I would go the cowl hood route, it's cheaper and actually functions.

[Mr. Man]

gdmjoe which # Kenny Brown is that?

[ImpalaSlayer]

i dig Mikes old scoops, i need a spare hood cuz i got a project in mind.

[Rocknthehawk]

gdmjoe which # Kenny Brown is that?

That was Mike's car (kb-marauder-s), originally bigjoep. It's probably a soda can by now. It was totalled and parted out last fall.

[RacerX]

Nope. Not Mike's. It was pretty much a soda can when we took it apart, but, it didn't have the TransAm intakes. :(

[Mr. Man]

Yeah but what # was it. I've been told there were 10 KB's. Haggis and Ladyhawke have 5 and 8 and N04GL(?) has #10. Be neat to record all of them if we could.

[RacerX]

OOPS! I stand corrected!!! You're right! It was mashed enough I didn't notice! It DID have those! As far as number, Sean, Bob or Adam should know.
http://www.myspace.com/kb_marauder_s/photos/6005129

[Raven34]

can someone do a basic photoshop of the mach1 shaker??? i thought of this the day after the guy next door bought a mach 1

[Big Black Beast]

I actually don't think the shaker would look that great on a Marauder. It would seem sort of out of place to me. I actually think an Couger Eliminator scoop or Mustang Boss 429 scoop might look better.

[GreekGod]

The Boss 429 scoop might look good. If somebody photoshops the shaker, please also do/show a teardrop ('64-66) Galaxie type).

============================== =======

[whd507]

I had a 1969 Mustang/Torino CJ hood scoop (the one with the turn signals at the rear) on my 1971 LTD years ago, the little grille matched the LTD grille and it looked stock, it might look good on a MM too (nut might need vertical grill slits to match the MM grille...

[justbob]

How about an '80-'81 Z28 scoop?:dunno: I also really liked Zacks on his black, looked really sharp.
http://i300.photobucket.com/albums/nn19/marauding4life/carandothers015.jpg

[whd507]

I would like to see a 71-73 Mustang ram air hood on a MM.

[Vortex]

I would like to see a 71-73 Mustang ram air hood on a MM.

The one with the NACA ducts.