PCV valve location and ?

[SlkMerc]

Hey all - Where is our PCV valve located? I see 2 possible candidates one on each V/Cover. I am interested in the catch can dealio as well. Anyone have a how - to? At what intervals do we change the PCV valve?

[musclemerc]

The pcv is on the PS cam cover. Remove it, soak it in degreaser, and blow it out. There is no reason to replace it unless the ball won't rattle. I made a baffled catch can thread, look it up and make your own.

[ImpalaSlayer]

musclemerc is the man when it comes to this.

[mercury5]

has any one replaced it yet (EGR VALVE). i was wondering whats going on with my 03 marauder before i break down and take it to the dealersship. here is the problem. when i drive below 40mph, it hesitates and jerks bad, i replaced the fuel filter, tried c-foam, replaced the pluges about 12,000 miles ago.the car has 112,000 miles on it.:confused: I WAS WONDERING ABOUT THE COILS ALSO, but how do you find and check the bad one if any.

[SlkMerc]

^ You buy them from MuscleMerc at an amazing price. It's about the same money to have the dealer load test yours. Im getting a set here in a few days just to have and ordered the GMS connector kit already. From what it sounds like you have a bad coil. No CEL?

[musclemerc]

^ Thanks,

Ya, it sounds like you have bad coils. To answer your question about finding the bad one is to have a dealer do a coil test. The test will show exactly which one's are bad.

[RF Overlord]

mercury5, you asked about the EGR valve in a thread about the PCV...you may get more answers if you ask the question as a separate thread.