PDA

View Full Version : Wanted To Buy Drivers door switch panel.


TooManyFords
09-03-2010, 07:28 AM
Mine has the dreaded broken tab to the back so it always wants to lift up. The last stereo shop broke it and tried to hot-glue the tab back on. That lasted until this year when I figured out what they did.

I have all the switches, but whatever you have, let me know.
breeze
09-03-2010, 07:32 AM
Mine has the dreaded broken tab to the back so it always wants to lift up. The last stereo shop broke it and tried to hot-glue the tab back on. That lasted until this year when I figured out what they did.

I have all the switches, but whatever you have, let me know.

i need one too.lol
TooManyFords
09-03-2010, 07:35 AM
i need one too.lol

Get in line! LOL!
ImpalaSlayer
09-03-2010, 08:14 AM
if you have the tab, use CA to glue it back on, i break mine every time and use CA and it holds great
TooManyFords
09-03-2010, 08:15 AM
Is CA the clear brush-on type super glue stuff? If so, I think I have some of that. Now I'll have to tear the door panel off to find the tab.
Krytin
09-03-2010, 08:24 AM
As I remember a brand new one was under $20 from Ray the dealer but that was 6 years ago.
ImpalaSlayer
09-03-2010, 08:28 AM
CA comes in small bottles, usually less then an ounce. its like super glue. hell super glue would prolly work too
TooManyFords
09-03-2010, 08:29 AM
I think I have the CA in the toolbox, but I also send Ray "TheDealer" a pm to see if he can still get them. Long weekend, I got time to pry the door apart.
BLACKMARAUDER04
09-03-2010, 12:18 PM
Dealer replaced mine at my 100,000mile service abou 8 months ago. The part was $35
TooManyFords
09-08-2010, 06:40 AM
Just spoke with Ray TheDealer and he hooked me right up. I should have a minty fresh new panel in a week or so.

Thanks Ray!
Blk Mamba
09-08-2010, 07:20 AM
I need to order one before they are gone.
Richy04
09-08-2010, 07:42 AM
Try the q-bond stuff I mentioned, it works great!!
liquid
09-08-2010, 08:28 AM
I fabricated a new tab out of a leftover block of PVC (buy it as base molding from Lowes), and epoxied it onto the switch panel. I don't see the point in trying to re-glue the flimsy plastic tab.
tbone
09-08-2010, 05:03 PM
I carefully pried mine up today to service the switch which sometimes gives me problems only to find that the previous owner already messed it up. Oh well.
JOEMERC
09-09-2010, 04:34 PM
Once you pry it up its never the same,when i put in new door speakers in ,my tap broke.door panel was alotta fun to put back on also.....