Any suggestions before I continue

[testme]

Today I started taking off the front upper control arms and for the most part straight shot removing it, now its raining out and im extending this into a tomorrow morning job. How the heck do you remove the two half bolts that keep the bushings in place i know one at a time and all but my springs are in the way from sliding them out. Any help with this would be sweet :bows:

[Got_1]

IIRC you have to remove to strut assembly to get the bolts out

[testme]

your right. I was hoping to dance around dropping the shock assy

[Zack]

your right. I was hoping to dance around dropping the shock assy

LOL thats the easiest part of the whole job.

[testme]

believe it or not zack everything else came out with ease. All though I sprayed liquid wrench everywhere a day prior:)

[justbob]

Just take out the three nuts and lower bolt of the shock assembly and lower it down enough to wiggle those bolts out. make sure to disconect the ABS line from the control arm or it will snap off when the upper control arm gets free. As long as you jacked up the car at the frame, then no worries, nothing will bite you. :)