Haki 03 Project

[Dennis Reinhart]

Well Haki sent his 03 down and here is what we have planned for it, a remanufactured 03 Cobra long block, Kooks LTH, built transmission with deep pan, trans cooler, MMDS, Metco cont arms, even flow cooling kit, 410 gears with new locker, Addco rear sway bar Pro Guard skid plate, we have replaced his drivers power window motor, Aero force guage, Auto meter boost guage Novi 220 air to air, SS break lines complete brake upgrade with powder coated calipers. High out put alternator. I will start posting complete pictures this weekend.

[babbage]

Geesh. I think that is everything but the kitchen sink! What else could you possibly add? Nice mod list! Congrats.

[hakisaki]

thanks dennis...

[hakisaki]

thanks i can't wait for it to get done.

[scruff]

i,m going to get me one of them lottery tickets next week to lol

[Dennis Reinhart]

Well Drew is starting in the rear, we are pulling to old 8.8 out installing a Detroit locker, 4:10 gears Addco rear sway bar, Metco control arms. We will upgrade the brakes and calipers in the rear will undercoat the entire car when we are done. Next engine and transmission removal. New fuel system, New drive shaft, we are adding a transmission cooler.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290094269-IMG_0001.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290094357-IMG_0002.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290094377-IMG_0003.jpg

[rayjay]

Dang Dennis, I wish your facility was closer to me. :(

[napolitano]

Way to go Haki. I know what I'm saving for now.

[Dennis Reinhart]

Here is the shot of the Rotunda tool we use to set the rearend up with, have decided to go 31 spline with the locker,

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290110427-IMG_0004.jpg

The rear parking brake shoes fell off, I have never seen this before, so we are going to clean and paint every thing upon reassembly

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290110533-IMG_0005.jpg

Here is the high out put alternator. And IC

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290110979-IMG_0007.jpg


IC pipes

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290111055-IMG_0008.jpg

Metco C/A

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290111144-IMG_0009.jpg

[hakisaki]

looking good!!!!

[F8LBITEva]

WOW what a project. I look forward to pics.

[CBT]

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290094377-IMG_0003.jpg

Only 4 studs :confused:

[LANDY]

It looks like the bottom one broke.
Btw nice project, can't wait to see the final results.

[hakisaki]

woooooooooooohooooooooooooooo! !!!!!!

[Dennis Reinhart]

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1290094377-IMG_0003.jpg

Only 4 studs :confused:



It is in there its just loose the rotor were frozen on the axiles

[Dennis Reinhart]

We will be pulling engine and trans, pressure washing the under carriage and painting and undercoating the entire frame, and running the fuel system, we ordered 31 spline axials and the spider gears to convert the posi to 31 spline.

[FormulaMarauder]

Awesome Dennis, get that thing to run times similar to mine!

[babbage]

With a remanufactured 03 Cobra long block that thing should make 500hp easy. Very nice. What are you using for undercoat Dennis?

[LANDY]

With a remanufactured 03 Cobra long block that thing should make 500hp easy. Very nice. What are you using for undercoat Dennis? if he gets an 8 rib set up then he can turn the boost up and make way more than that and be a happy camper.

[Dennis Reinhart]

I have been off since Wed but the guys pressure washed the entire bottom of the car, we are painting and under coating the frame, we ordeered the 31 spline axialls and spider gear will install them and new barkes and lines, pull the transmission build it and the pull the engine have the timing cover and valve covers powder coated install on the new Cobra motor, and add the LTH top it off with a Novi 2200, this is my plans for Larrys car as well. So we have a full week ahead of us. Haki car is in pieces but it will all come to gether we ar adding a mezzirie pump as well. And many other bolt ons.

[Dennis Reinhart]

Today we undercoated the entire under carriage of the car, we received the spider gear kit to convert Hakis new 28 spline Carrier to 31 spline, we have the new axles, we installed new emergency brake shoes painted the backing plates, and have the rear rotors and brake lines ready to install tomorrow, the transmission is out being rebuilt, the motor is out will detail the hood, and the install the Cobra crate motor. I am sending out the VC and timing cover and intake to be painted black, Haki is coming in Friday, I also wanted to say Larry is doing great and I am going to install a Cobra crate motor in his car as well, so we have a full shop, we did have a issue with the powder coater and some pipes were delayed but every thing is in order now and I sold a Novi 2200 Friday for another member, I will post detailed pictures of Hakis 31 spline rear end tomorrow, and I also wanted to congratulate Steve Schingler AKA Glassman on his great time, he cut a 1.4 60' time, it's about time he got a break.:beer::beer:

[Pat]

I will post detailed pictures of Hakis 31 spline rear end tomorrow :beer:

I know that's what you meant, just having a chuckle.


BTW what specifically was the cause of Glassman's fuel pump issue at SSHS10, do you know?

[Dennis Reinhart]

I know that's what you meant, just having a chuckle.


BTW what specifically was the cause of Glassman's fuel pump issue at SSHS10, do you know?


I talked to Steve it was the very low temperature this was a record low for over ten years that morning,

So here are the photos and I am really impressed the way this has turned out I will have the rear end finished tomorrow the under carriage looks like a new car. I am going to add another coat of undercoating, and will post the finished pictures tomorrow.

New emergency brake shoes new shocks new cont arms the whole under carriage under coated

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291244362-IMG_0014.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291244392-IMG_0013.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291244613-IMG_0008.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291244715-IMG_0006.jpg

[Dennis Reinhart]

Well the rearend is complete along with new shocks new brake lines new rotors powdercoated rotors and the new engine will go in next week.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402536-IMG_0010a.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402556-IMG_0011a.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402622-IMG_0013a.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402647-IMG_0014a.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402729-IMG_0015a.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291402749-IMG_0012a.jpg

[hakisaki]

wooooooohoooooooooooooooooo!!! !!!!!!!!!!!!!!!!!!!!!!!!

[babbage]

It looks fantastic, very nice. Gabriel ultra shocks - are they firmer than factory?

[burt ragio]

Looking spanky new real sweet. Between the visuals drilled/slotted rotors rear cover big sway bars & trail arms you get bling & performance. Is there also a rear pro guard you added ? What mfg are the rotors & pads are you using ?

[Dennis Reinhart]

Looking spanky new real sweet. Between the visuals drilled/slotted rotors rear cover big sway bars & trail arms you get bling & performance. Is there also a rear pro guard you added ? What mfg are the rotors & pads are you using ?


Yes Burt it has a new Pro Guard, and the Rotors and powdercoated calipers come loaded I get them from a company that also does the Stainless lines. The front will be done the same way.

[Dennis Reinhart]

Well this week we are installing the engine, and transmission. I am waiting on the valve covers and timing cover and intake to come back from the powder coater, here is the dynotech drive shaft.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291667922-IMG_0021.jpg

Inner cooler installed.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291668499-IMG_0019.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291668643-IMG_0018.jpg

[hakisaki]

looking goooooooood!!!!!!!

[hakisaki]

it's 25 degrees in nashville right now....

[napolitano]

Everything looks to be coming together for you Haki. Not so for me, one problem after another. Can't wait to see what your car will do at the track.

[Dennis Reinhart]

Its coming along, as I told him I like to take my time the Crate motor is here, I sent his intake out and VC as well as the timing cover as I have another project car that is here, and they have come back and look good.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291911026-flywheel.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291911058-vc.jpg

So will get these on and and set the motor in there.

[hakisaki]

what happened levi???????

[CBT]

Is that lower powder coated? If so, looks pretty sweet, I like it.



Its coming along,

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1291911058-vc.jpg

So will get these on and and set the motor in there.

[Dennis Reinhart]

It is and The VC and timing cover will look the same this is the only thing holding us up from getting the motor in.

[Dennis Reinhart]

Well the upper intake showed up today along with the timing cover, we pulled the engine, we need tha VC and its ready to go together.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292289707-hakitc.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292289825-hakitc1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292289867-hakiui.jpg

[napolitano]

Haki, I was throwing a few codes on mm's computer, so i datalogged it and sent the file to dennis for review. Dennis corrected it with a file. That is what is cool with xcal3, you can datalog your car and send the file to dennis to look at from time to time just to make sure everything is good with your car. Now i have to wait for these Aeroforce guages to come in, they are on backorder, so i can install them on my MM. I'll call you tommorow night. Need some info on a simple system for the car.

[hakisaki]

no problem and send me your email address so i can paypal that you money.... i have a perfect mid/high and amp and sub setup for our marauder's 2-3 8 inch subs in the upper deck of the truck that take's up absolutely no space and weigh's nothing... i will post pic's when i get my car back and show you!!!!!!

[hakisaki]

thanks's for all the pic's dennis it's keep me way less worried about everything....it's like christmas i can't wait to drive it again.........man im getting anxious

[Dennis Reinhart]

Today we installed the engine on a stand the intake showed up and front cover. I still need the VC, I will post more pics tomorrow, I am waiting on another set for another car, these are the things I have to do, when relying on others to help out, so I will keep the Pictures coming.

[hakisaki]

no prob im stuck in a snow storm where my house so im super bored.... thanks for keeping me posted let me know if you need anything.

[jflave]

Your car should look good when it all comes together, nice work Dennis. :)

[hakisaki]

dennis email me when you post the pics..

[Dennis Reinhart]

Well we have all the sheet metal back I need to swap ot the 03 Cobra front timing cover to the Marauder cover, the will drop the engine in after we install the Kooks, the engine came out real good, I am actualy doing three of these this month will actualy be just about the same, so I will be posting more pictures.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292702457-hakie.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292702487-hakie1.jpg



http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292702546-hakief.jpg



http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1292702586-hakier.jpg

[hakisaki]

looks great the silver came out well

[hakisaki]

should i put a new throttle body on the car...

[burt ragio]

Good to see the added rear head cool modification. Was the rear head cool mod transfered from the old motor to the new ? If not good sugestion. Always nice to have everything at apx same temp.

[Granddaddy Marq]

No cylinder #8 cooling mod?

[massacre]

No cylinder #8 cooling mod?

If you look closely, you can see that they went out the top of the heads, instead of the rear of the heads.

[Dennis Reinhart]

If you look closely, you can see that they went out the top of the heads, instead of the rear of the heads.

Yes that is where there supposed
To the even flow kit goes at the top, not in the back.

[massacre]

Is there a reason why my post was deleted?:confused:


And Dennis, I am aware of the differences, I am running the evenflow setup on my car. Was just pointing it out to grandaddy.

[Granddaddy Marq]

I do see this now. Is this a kit you can buy or do you have to make it? Are there illustrations on this? How hard would it be to install with the motor in the car?

[Dennis Reinhart]

It is made by even flow, and you will have to remove the intake, I weld a nipple in to the cross over pipe instead of cutting the URH and installing the adapter I will post up the instructions tomorrow.

[Dennis Reinhart]

Well the engine is done, I sent the water cross over tube out to weld a bung on it to connect the even flow kit, I like this far better than hose clamps and cutting the URH, we installed the Kooks and we are about ready in install the motor and transmission, we also upgraded the front brakes.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293047490-IMG_0078.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293047622-IMG_0077.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293047712-IMG_0076.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293047763-IMG_0075.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293047886-IMG_0074.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293048077-IMG_0069.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293048149-IMG_0068.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293048422-IMG_0067.jpg

[massacre]

Motor looks awesome.

[Dennis Reinhart]

Here is how even flow sends out the kit because they can not modify the cross over, it would be to expensive, so they add the adapter to splice in to the URH.

http://www.mercurymarauder.net/showcase/files/4/6/mm-8.JPG

This is how I install it which do you prefer.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293055614-IMG_0080.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293055566-IMG_0079.jpg

This way the OEM hose stays in tack with no screw clamps needed.

[LANDY]

looks good Dennis, i might have to do that to my car before the summer

[RacerX]

Nice! Good job on the Crossover tube!

[J.bo]

Dennis, what type of hose clamp are you using?

[Dennis Reinhart]

Dennis, what type of hose clamp are you using?


That is a special clamp, that is crimped with matching set of pliers. Similar to a cv Boot clamp.

[hakisaki]

i cannot wait!!!!!!!!!!!!!!! everything looks perfect!!!!!!!!!!!!!!

[hakisaki]

man i can't wait!!!!!!!!!!!!!!

[Dennis Reinhart]

This week we will installing the engine, and transmission, on Hakis car and another high RWHP car, so we will be working on to at the same time. last week. I took in another 03A with 20 K on the clock this car is immaculate, it has my older watter to air it, the owner wants to sell it for 3000.00 this is a complete Vortech kit, we will be installing a Novi 2200 and a air to replace it on this car with a 03 Cobra crate motor. He slod the old motor for 2500.

[hakisaki]

any new pics?

[Dennis Reinhart]

Of Course, the wiring harness is on the car is in the garage and its going in, I also have a twin that is going in at the same time, as well as the a 03B that came in from Chicago that has 20K on the clock that has my water to air kit on it, that will get the same thing as you 03 Cobra crate motor and a Novi 2200 the owner has sold the engine for 2k and the SC is for sale for 3K it has about 10K on it and it is a Vortech V2 with a mini race bypas I will post some pictures of this to.

Here is yours

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293671972-IMG_0100.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293672056-IMG_0101.jpg

Here is the twin

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293672184-IMG_0102.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293672435-IMG_0103.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293672372-IMG_0104.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1293672496-IMG_0105.jpg

[LANDY]

Dennis, are you putting an 8 rib pulley setup on this car?

[hakisaki]

it's that my car in the background of that pic??

[hakisaki]

would an 8 rib setup be better and more reliable

[Dennis Reinhart]

Dennis, are you putting an 8 rib pulley setup on this car?


The second car is a 8 rib, Hacki's is not and I do not feel he will need it, if he does I will add it, I am trying to give him the best power for what he has invested, my car makes 17PSI on a six rib.

[LANDY]

I understand, the 8 rib set up can be expenssive and some cars dont need it.
BTW i really like the way you did the rear cooling mod.

[hakisaki]

any new pics

[hakisaki]

rides magazine is doing a full 3 page article whenever it get's done in atlanta!!

[RacerX]

I didn't think you could post porn on this site Dennis! :D

[hakisaki]

i look at my motor pics at least 5 time's a day!!!! can't wait...

[hakisaki]

dennis will this 8 rib setup be more reliable and have less chance's of belt shred, slippage, loss of power and a crank i really don't want to have to worry anything.... and how long will it take and email me the price

[hakisaki]

and what about the Innovator West Crank and Vortech Power Grip S/C Pulley

[hakisaki]

what about t clamp's dennis...

[Dennis Reinhart]

and what about the Innovator West Crank and Vortech Power Grip S/C Pulley



Hacki your car has a SFI ballancer if you look at the pictures if you have questions please just call.

[Dennis Reinhart]

what about t clamp's dennis...

Yes they will be installed

[cpe6]

Dennis with my upgrades planned do I need the high output alternator?

[Dennis Reinhart]

Dennis with my upgrades planned do I need the high output alternator?


Not unless you add a bunch of stero equipment.

[hakisaki]

i decided not to add any subwoofers just a set of mid's and high's and an amp no sub's!!!!!!!!!!

[hakisaki]

it's pretty much done she will be home sooooooon!!!!!!!!!!!!<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

[cpe6]

He starts mines after yours is finished..............

[Dennis Reinhart]

I am sorry for for delays on Hackie's updates, first of all I was sick for 2 weeks, I have never been in bed this long except with two twins I met in France while in Desert Storm.

But this week I got back on it I now have three Marauders here for 03 Cobra conversions with Novi 2200 S/C, Hackies car was very rough it needed undercoating new brakes steel lines, new trans the car has a 130 K on it, I have taken my time and gone through the whole car, new drive shaft full gauges new drivers window motor 60 lb injectors twin fuel pumps B5 5000 Maf LTH Pro guard it should make 17 PSI 410 gears, it starts and idles perfect he is flying in tomorrow to look at the complete transformation.

So here are a few shots the next car will be all Black even the supercharger, to day we did a 06 Roush with just a CAK it gained 25 RWHP with the tune he is over 400 to the tires.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296783474-IMG_0001h.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296783689-IMG_0002h1.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296783709-IMG_0007h3.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296783745-IMG_0008h4.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296783778-IMG_0009h5.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296784153-IMG_0010h6.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296784181-IMG_0011a.jpg

Shown to the side is the 06 3V GT we are installing a Novi 22 air to air these will be posted next week

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296784272-IMG_00138.jpg


Here are the Videos on the Roush we just did the front facia was torn we ordered that pre painted and added a huge Avoco heat exchanger with twin fans, stock it made 369 with just a cold air kit it gained 25 RWHP after leaning the fules and adding some timing the made 415 RWHP, what a great car. I have sold five Marauder kits since Jan 14 and two CVPI kits, thank you the members for this.

http://www.youtube.com/watch?v=04_LmsL_ikc (http://www.youtube.com/watch?v=04_LmsL_ikc)

[musclemerc]

Looks good Dennis. ;)

[hakisaki]

i can't wait to see it tomm!!!!!!!!!!!!

[Dennis Reinhart]

Looks good Dennis. ;)


Thank you that means a lot to me coming from you, I charged Hacki 900.00 for just the SC install, where other shops have charged upwards of 1500 or more, not including the dyno tune, I try to be as fair as I can and I so much enjoy this site and it's members. I do wjhat ever I can to make any one happy, but we all know this is not a reasonable goal, but I try. And to me that is what is most important.

[hakisaki]

i really don't get excited these day's but damn im not going to be able to sleep...!!!!!!!!!

[LANDY]

looks nice Dennis, cant wait to see the numbers.
Haki i wouldnt be able to sleep either.

[hakisaki]

295/45 18 should i get some drag radial's in this size???? i just found a decent deal

[hakisaki]

http://cgi.ebay.com/ebaymotors/2-NEW-NITTO-NT05-NT-05-NT-05-295-45ZR18-99W-295-45-18-_W0QQcmdZViewItemQQfitsZSectio nQ2520WidthQ3a295Q7cAspectQ252 0RatioQ3a45Q7cRimQ2520Diameter Q3a18QQhashZitem3350f44067QQit emZ220401516647QQptZMotorsQ5fC arQ5fTruckQ5fPartsQ5fAccessori es#ht_523wt_919

[LANDY]

http://cgi.ebay.com/ebaymotors/2-NEW-NITTO-NT05-NT-05-NT-05-295-45ZR18-99W-295-45-18-_W0QQcmdZViewItemQQfitsZSectio nQ2520WidthQ3a295Q7cAspectQ252 0RatioQ3a45Q7cRimQ2520Diameter Q3a18QQhashZitem3350f44067QQit emZ220401516647QQptZMotorsQ5fC arQ5fTruckQ5fPartsQ5fAccessori es#ht_523wt_919
those arent drag radials, but they will do the job. highly recomend to get used to the car and its power especially on wet roads, before choosing tires.

[hakisaki]

oh okay thank's for the quick response... it has brand new tire's anyway.

[jflave]

Car looks great, enjoy your day with Dennis, get some sleep. :)

[rayjay]

Bring her to Carlisle and show her off Haki, lookin shweet!

[Dennis Reinhart]

Hacki showed up today and I had the blower off trying to get the right belt, I started with 110.5" and had belt slippage it made 448 RWHP, so I ordered a Napa belt 109 3/8" it was tight but worked on the fourth pull it made Hacki smile I will stop here but I will make some changes to the A/F and straighten it out a bit, till I get some miles on the car, I am using a new twin fuel pump set up and the FRP was good the duty cycle was 2.4 I am finishing installing Muth Mirrors and a few other add ons, over all this has turned out to be a real good project we start another one next week.
These are in standard Hacki wanted to see these as well as SAE.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296865013-Hacki03cobraNovi2200.jpg

I will post the video later tonight and Hacki took a bunch of pictures.

http://www.youtube.com/watch?v=fI4Tt9wCisA (http://www.youtube.com/watch?v=fI4Tt9wCisA)

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1296949780-HackiSAE.jpg

[guspech750]

Nice. Very nice.

[LANDY]

looks good Dennis.
how much timing is it running with that power?

[Dennis Reinhart]

He is running 16 degrees, the IAT was very low, I will post the data log.

[ntd]

I am using a new twin fuel pump set up and the FRP was good the duty cycle was 2.4


As always nice work looks really good, whats new about the fuel pump setup?

[CWright]

NICE WORK DENNIS! Haki, you're going to have some fun!:D:burnout:

[LANDY]

He is running 16 degrees, the IAT was very low, I will post the data log.
thats perfect, im sure he will love the power.
Haki you have yourself a mid 11 sec car.

[hakisaki]

http://www.youtube.com/watch?v=fzoFvt3gE58

[hakisaki]

http://www.youtube.com/watch?v=-ij9UH82SZQ&feature=channel

[hakisaki]

http://www.youtube.com/watch?v=K3pBXfzxYro&feature=channel

[musclemerc]

DR I thought you always use the SAE format for dyno? The sheet you posted is in STD can you convert it to SAE them repost the dyno info?

[LANDY]

DR I thought you always use the SAE format for dyno? The sheet you posted is in STD can you convert it to SAE them repost the dyno info?its only about 10 to 15hp difference.

[napolitano]

with those numbers i don't think it makes a difference.

[DOOM]

I charged Hacki 900.00 for just the SC install,

$900.00 For a S/C install!!! :eek: :eek: :eek:

Thats dirt cheap!

Nice work & nice numbers. :beer: :banana2:

Hacki enjoy the new found power. :burn:

BTW do you you have a BIG BRAKE kit on the car?
If not i would strongly suggest getting one!

[Dennis Reinhart]

its only about 10 to 15hp difference.


Thanks Landy, it comes out to 17 RWHP the car is also making very good torque, if Merc had read the post as every one else did, Merc would have seen that Hacki wanted to see the difference in SAE and Standard instead of looking to take a jab. Hacki has both sheets, at least I stated it was Standard because I knew some one would chime in. And since Edgar Cayce and I were good friends I could have even predicted that, but know it does not matter. I have learned its is far better to laugh I actually let Hacki up in the car with me and showed him how A/F is adjusted and what to look for when data logging, and I normally post SAE, it makes no difference, at this point this is a safe tune the car will make more after it gets some miles on it and and some more adjustments for now it is fine.

[jflave]

Hacki, looks like you got yourself a mean machine, great #'s. Hey Dennis your on a roll keep it up, real nice work. :2thumbs:

[hakisaki]

i love the car it came out perfect!!!

[blazen71]

Congrats. Another happy customer!

[Dennis Reinhart]

well I will say this is a very good kit I spent many hours on detail work, the entire car was undercoated the mufflers were high temprature painted the car has been detailed the car starts and runs perfect. It will get another oil change and a final dyno




http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532423-hackieng.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532677-hackikooks.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532844-hackimuflers.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532863-hackirear.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532899-hackislf.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532927-haki1side.jpg

Thank you the opportunity in completing this and thank you for choosing my company.



Dennis A Reinhart

[jflave]

WOW that looks good Dennis. :)

[DOOM]

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1297532927-haki1side.jpg

Thank you the opportunity in completing this and thank you for choosing my company.



Dennis A Reinhart

Now that right there is a SLEEPER! :sleepy: :snore:

Enjoy and respect the newfound power! :beer:

[MOTOWN]

that looks outstanding! he's gonna have un stopable grin syndrome!

[hakisaki]

it all look's great!!!!!!!!!!!!!!!!!

[hakisaki]

im already grinning!!!

[bugsyc]

KUDOS MR.R....I'm chompin at the bit to get my MM down to your shop...speak with you soon..bugsy:beer:

[hakisaki]

dennis thank's again for everything and all the work on the car i'm extremely happy with everything!!!!!!!!!!!!!!!!!<<<<<<<<<<<

[CBT]

And since Edgar Cayce and I were good friends I could have even predicted that,

You are way older than you look if you two were good friends, he died 66 years ago :eek:. I had to visit his Association for Research and Enlightenment in Virginia Beach for one of my college courses last year, it was interesting and bizarre at the same time.
Car looks sharp, engine especially, killer numbers.

[Dennis Reinhart]

You are way older than you look if you two were good friends, he died 66 years ago :eek:. I had to visit his Association for Research and Enlightenment in Virginia Beach for one of my college courses last year, it was interesting and bizarre at the same time.
Car looks sharp, engine especially, killer numbers.

Thank you, I also own property at the foutain of youth.

[rayjay]

Thats a beautiful piece of work. Congrats to both the creator and the owner! :beer: I really hope to be able to do this some day.

[CBT]

Thats a beautiful piece of work. Congrats to both the creator and the owner! :beer: I really hope to be able to do this some day.

For real, with all the new parts and paint/powdercoating/undercoating and power, talk about a nice turnout. I'd spend the first week just looking at all the upgrades.

[Loco1234]

I gotta get an 8 rib setup for my ride... I go through about 4-6 belts a year on the 6 rib... Anytime I get on the gas hard & have to let off quick it's all over... & I run a rather tight 6rib to avoid that... Did you decide to go with the 8rib on this ride or stick with the 6rib...?
I honestly didn't see as many 6rib belt problems till I crossed the 600+rwhp mark.. I just had to change the belt a couple days ago again..

[LANDY]

I gotta get an 8 rib setup for my ride... I go through about 4-6 belts a year on the 6 rib... Anytime I get on the gas hard & have to let off quick it's all over... & I run a rather tight 6rib to avoid that... Did you decide to go with the 8rib on this ride or stick with the 6rib...?
I honestly didn't see as many 6rib belt problems till I crossed the 600+rwhp mark.. I just had to change the belt a couple days ago again.. what were the numbers when you last dynoed it.

[hakisaki]

545 before broken in

[Dennis Reinhart]

545 before broken in


The car runs perfect starts and idles perfect, you can hardly tell the car is S/C of course till you give it some gas.

[hakisaki]

it's still holding up so i think i will be fine!

[Marauderman]

it's still holding up so i think i will be fine!

BY this ^^^^^^^^^you mean...........what?

[LANDY]

BY this ^^^^^^^^^you mean...........what?he means he has been treating the car like he should with 550rwhp.:D
J/K.

[hakisaki]

you got it!!

[Marauderman]

it's still holding up so i think i will be fine!


he means he has been treating the car like he should with 550rwhp.:D
J/K.


you got it!!

FWIW---Just because it has it doesn't mean it will take it........if over taxed often.....just because it has it and hasn't broke yet----glad it is not letting you down ...and BTW.........DR did mine as well.....be careful with your fun.....cause its great to know you can when you want to....YAHOO!!!..

[hakisaki]

this message is to broken apart.. what does if over taxed mean??? and hopefully it will be fine dr is running the same 6 rib setup!!

[LANDY]

That is pretty cool that us vortech guys can run 17psi still on a 6rib.

[hakisaki]

yea i know who want's a 8 rib if you don't need it!!!!

[Dennis Reinhart]

Well we spent yesterday pulling the dash, and replacing the blend air door motor, tomorrow my friend Ed is driving the car to Atlanta and Hacki's friend is picking the car up there. Thank you Hacki for allowing to make your dream come true. Next week Larry is bringing his car in for the same treatment, and I have another one here from Chicago we are working on as well as another car from SC that is getting the water to air kit off the Chicago car but we will convert this to A/A

[hakisaki]

im glad your busy... thank's for everything!!

[sailsmen]

Please tell us how your first week with the Marauder has been?
Have you ordered a new set of rear tires and are there peal out marks on the street in front of your house?:D

[Dennis Reinhart]

The car is being photographed by a magazine company then it gets wider tires and a ear poping stereo.

[sailsmen]

So his first week with the car hasn't happened yet?

[Dennis Reinhart]

So his first week with the car hasn't happened yet?


Billy he has the car he is installing a very expensive stereo this is what he does for a living and he is getting different tires and the car is photographed for a magazine.

[sailsmen]

Oh, since you answered I thought you were having it photo. Now I understand.
I am sure he will post up his experience in burning rubber!:D

[rayjay]

Confused, the stereo installed is going to be photo'd or your work on the car, or the car as a whole ?

[hakisaki]

well the photo shoot was before the stereo work so mainly the motor work and just outside shot's but im installing a super clean and high end setup in the next couple of week's...i'm probably going with 2 8 inch digital design's subwoofer's in the rear deck under some grill cloth all flushed and nothing will be visible.. but the amplifier in the trunk

[hakisaki]

oh and i love the car!! and the great work... i'm getting a 88 fox body ready for a 03 cobra swap and 6 speed in the next few month's to send to dennis!!

[hakisaki]

oh and dennis every time i'm not in my car i see this damn black marauder that's haunting me!!!! i am always in my dually when i see it or i'm at the shop and it will speed by!!! but my dually is probably faster than his car but whatever and i know my marauder is!!! we will meet one day in my car!!!!!!!!!!!!!!!!!!