trailer hitch

[Bradley G]

I don't want one but I may have few options to consider.
just to haul a small 4X8 trailer .Where did you get your hitch?
Was there anything required to modify to install it?

[jdando]

etrailer.com (http://www.etrailer.com/Trailer-Hitch/Mercury/Marauder/2003/24526.html?vehicleid=20033257)

I have the small 1 1/4" hitch, for a back rack or bike rack. Installation was "simple", drilled a couple of holes and bolted it on. It is probably worth the $50-75 you might have to pay get in installed unless you like laying on your back on cold cement :(

[Chevyguy]

Reese Class III costs a bit less than the class II tucks right up behind the bumper cover, standard 2" receiver

http://i348.photobucket.com/albums/q329/folingo/2001%20Crown%20Victoria/Dual%20Exhaust/SL371783.jpg

Need a Modulite to wire up the harness, this is a powered isolator relay keeps the LCM safe from shorts and excess load and provides power for the trailer lights so they are nice and bright. Plus I needed an turn signal adapter as I had the amber turns in my vic, and IIRC the Marauder still has separate turn /stop

[RoyLPita]

I have a Draw-tite class 2 hitch with 1 1/4" adaptor. I only use it for the back/bike rack combo. The hitch is mounted in the back only.

[Bradley G]

The hitch plan is nixed, thanks for the info guys!

[Motorhead350]

Buy mine. $50.