Vortech Water to air complete

[Dennis Reinhart]

I took in another 03A with 20 K on the clock this car is immaculate, it has my older watter to air it, the owner wants to sell it for 3000.00 this is a complete Vortech kit, we will be installing a Novi 2200 and a air to replace it on this car with a 03 Cobra crate motor. He slod the motor for 2500.00

[Mike827]

How much horse power will this kit make?

[Dennis Reinhart]

depending om exhaust and pulley size 440RWHP or more

[bugsyc]

Dennis, how much to install it on my 03MM?

[BODYMAN]

Change it to Air to Air and you can get right at 5 with proper tune and pulley,Stall & exhuast,fuel. thats what I got and have loved every minute of it great set up. I attribute the longevity of my motor to the fact the centri isnt boosting till 3400ish up were roots is hitting boost at2000 which equals more wear and tear. Now had our cars came with good internals that would be a different story.

[BODYMAN]

How much horse power will this kit make?

With this high 400's easily. But you need a stall to or you wont like it.

[Dennis Reinhart]

This kit has been reduced to 2400.00 this S/C has less than 5K on it it has the injectors and maf, complete water to air set up it does not come with the S/C mount, I can supply any missing parts reasonably.

[Peter]

Any warranty?

[Dennis Reinhart]

Any warranty?


No the unit was installed in 04 its on the car now it runs perfect and this a S Trim externally lubricated

[Peter]

No the unit was installed in 04 its on the car now it runs perfect and this a S Trim externally lubricated
Any pictures of the kit?

[Dennis Reinhart]

I will post some tomorrow.

[dohc324ci]

Curious what would it cost to make it A2A w/mount and without MAF and injectors?

[Dennis Reinhart]

Fellas this is a take off for a customer that is upgrading to a Cobra crate motor and a Novi 2200. I can't part the kit out, if you do not want the injectors then sell them, I am sure there are members here that will buy them, as fas as converting it to A/A that would be about 1500.00 since these parts would be new. This is a very fair price, I just had a guy call for a kit for a 03 GM and wanted to spend 1400.00 for a super charger kit.

[Peter]

I will post some tomorrow.
Could you also give a list of parts included?
Also, is there anything in addition that needs to be purchased?

[Dennis Reinhart]

Well it would be the complete kit minus the S/C mount and fuel pump. As I said its on the car now and it runs perfect.

[Peter]

Well it would be the complete kit minus the S/C mount and fuel pump. As I said its on the car now and it runs perfect.
What would those parts run me?

[SGT_MERC]

Would this kit work on an 05 GM?

[Dennis Reinhart]

What would those parts run me?


Its listed in parts for sale,

[Dennis Reinhart]

Would this kit work on an 05 GM?


All the way to 2010

[Peter]

How much this kit weigh and how much would the shipping be to: Toronto, ON M1S3J8?

[Dennis Reinhart]

How much this kit weigh and how much would the shipping be to: Toronto, ON M1S3J8?


Peter please just call me. 904 276 5003

[Peter]

Peter please just call me. 904 276 5003
Dennis,

Before I call you, can you please post pictures and provide me with a spreadsheet of all the parts included?
I would like to see what I'm getting.

Thanks,

[Dennis Reinhart]

Here are ethe pictures and the install pictures are still in my forum, this kit will not have the bypass or the coolant reservoir, and fan or fuel pump.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1295199495-reservoir1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1295199527-wabypass.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1295199565-waengine.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1295199605-wattertoair.jpg

1 Vortech V-2 Supercharger Polished
K&N Filter with Maff relocation kit and hardware
4" flex tubing. 36" long
8 Fuel 42 LB Injectors part
Aftercooler reservoir w/hardware bag
High Volume Heat exchanger with powder coated Bracket
Custom after cooler with fittings
water Electric Booster Pump
2 crossover adapters
1/8" powdercoated steel ‘A’ bracket approx. 31" long
3" black plastic elbow w/3/4" barbed nipple
3" black plastic elbow w/ 90deg. 5/8" barbed fitting
Custom silver bracket with 3 ½" hole
¾" 90 degree barbed elbow (plastic)
8" powdercoated air pipe w/2 welded female fittings welded in.
16" powdercoated air pipe w/1 ¾" female fitting welded in
Coolant hose w/2 90 deg. Bends # 593 12 ½" long.
5/8" coolant hose w/ 90 deg. Bend # 4106 36" long
1" coolant hose 12" long.
10" clear tubing with female brass fitting on end. (Heat exch.to pump)
112" of 5/8" coolant hose.
62" coolant hose w/ 90 deg bend
48" coolant hose w/ 90 deg. Bend
Custom coolant hose ‘Y’ junction block w/ metal sleeve and J shape return hose.
Various sized Hose clamps.
Custom Mass Air flow Sensor wiring Harness with Intake air Temperature sensor and Harness.
Two Vacuum T fittings with 4" vacuum hose

904-276-5003

[Dennis Reinhart]

Kit sold I may have another in 30 days. Please lock this thread.