Mods for 2011

[babbage]

Ok I'll start:

SW Longtubes - self installed! (hopefully) with cats
New Fog light - PM me if you have one..
Replace seat cushion foam. (got the part already)
I want to also do the fuel filter upgrade deal.

[Bradley G]

Paint, trans oil cooler, paint, torque convertor, paint, and widened wheels & fresh drag radials,..oh, and paint
Did I say paint? :stupid:

[babbage]

Paint, trans oil cooler, paint, torque convertor, paint, and widened wheels & fresh drag radialsm,..oh, and paint
Did I say paint? :stupid:

So why are you going with white paint? :D I need some touch ups myself.

(Oh and I forgot to add badgeless to my above post - already have 2nd OEM grille)

[risky]

2.5" mandrel bent mid pipe swap
4.10 gears
SW longtube headers

[PurdueRifleman]

First comes paying the car off. If I have any more expendable income, I'll put 4.10s in it and begin gathering parts for the Eaton Swap.

[Bradley G]

I actually have considered going to a different color, the novelty might be short lived though.
So why are you going with white paint? :D I need some touch ups myself.

(Oh and I forgot to add badgeless to my above post - already have 2nd OEM grille)

[BLACK SHEEP]

Vehicle purchased 12-16-10

12-18-10 Tint
12-22-10 ordered K&N CAI.....received today pending install
12-26-10 ordered Eibach fronts....received email saying not available...ordered from another company.
12-26-10 ordered front/rear SB from Sparta....pending shipment (01-05-11) per email
12-29-10 ordered the front splitter thingy

Next on the list to be ordered...

1-4.10s
2-Tune
3-BBK
4-LTs-full exhaust (still reading on Kooks vs. SW)...major debate...I know...lol.
5-pending some $$ in my paypal, will get the dead pedal from BC4E.

Any group buys coming up would be great. Anybody? :D

[SC Cheesehead]

I actually have considered going to a different color, the novelty might be short lived though.

May I suggest DBP... ;)

[Spectragod]

Fuel Pump
Fuel filter mod
31 spline axles and carrier
62 Lb injectors
95MM Pro-M MAF
Widened wheels
Nakke suspension
Aluminator or stroker motor

Not necessarily in that order, I think a girlfriend would be cheaper.....:rolleyes:

[TFB]

Fuel Pump
Fuel filter mod
31 spline axles and carrier
62 Lb injectors
95MM Pro-M MAF
Widened wheels
Nakke suspension
Aluminator or stroker motor

Not necessarily in that order, I think a girlfriend would be cheaper.....:rolleyes:

Maybe for the first week...

[Pops]

Better words have never been spoken!

[Mr. Man]

Vehicle purchased 12-16-10

12-18-10 Tint
12-22-10 ordered K&N CAI.....received today pending install
12-26-10 ordered Eibach fronts....received email saying not available...ordered from another company.
12-26-10 ordered front/rear SB from Sparta....pending shipment (01-05-11) per email
12-29-10 ordered the front splitter thingy

Next on the list to be ordered...

1-4.10s
2-Tune
3-BBK
4-LTs-full exhaust (still reading on Kooks vs. SW)...major debate...I know...lol.
5-pending some $$ in my paypal, will get the dead pedal from BC4E.

Any group buys coming up would be great. Anybody? :D
What company is still selling the Eibach lowering kit?

Suspension parts for Mr. Black and brakes for Thor. If there is $$$$ left Bling for the engine compartment.

[BLACK SHEEP]

Just one of the few that came up when I googled.

The first company sent and email saying they have been discontinued. Hope I don't get an email tomorrow too. LOL I really want to lower it a bit.

[Mr. Man]

Just one of the few that came up when I googled.

The first company sent and email saying they have been discontinued. Hope I don't get an email tomorrow too. LOL I really want to lower it a bit.
Would you mind sharing the company name.

If all else fails I may get a set of factory springs and cut a coil.

[BLACK SHEEP]

This one---> http://www.autocarparts.com/part/274/1505/

I'm hoping some oddball performance shop will have them in stock somewhere. LOL

[a_d_a_m]

Swaybars
Collector plates
Maybe UDPs

[breeze]

mods for 2011.

: fix her up and then, fix her up. :D

[CWright]

Widened rears along with a rear set of Nitto 555 Extremes.

[rayjay]

SW long tube headers and new exhaust to the OEM tips, provided our union finishes the binding arbitration 2 year award that has been going on since 2006. NO contract since 2003, NO raises since 2005 when the BA award was finished. &%^%(*^ NYS! We've had to sue them twice in federal court just to get them to the table... :mad2::mad2::mad2::mad2:

[RacerX]

BB stroker, widened rims, 31 spline axles and carrier, control arms, front and rear sway bars, watts link and oem wing.

[jimbok1951]

MM stock is sleeping for the winter, but come spring:
1- SCT 3 Tune (without a doubt)
2- CAI (without a doubt) probably JLT, performance same & cost hands down, but still hoping someone has a used PHP for sale which I would jump on, I like the way they look but not for $400, got one to sell, PLEASE contact me.
3- Toying with exhaust cut outs, still looking for more feedback from members that currently have them ie, video with sound, also + & - of them. Got some please send.

[Mike]

May I suggest DBP... ;)

Can't go wrong :D

[SC Cheesehead]

Can't go wrong :D

Yeah, slam dunk... http://www.bloodydecks.com/forums/images/smilies/High_Five_emoticon.gif

[CameronVic]

I want to also do the fuel filter upgrade deal.
Did I teach a Mighty Marauder guy something? You'll want to use a brake line cutter, and some of these (http://commonwealthinc.ca.c9.previewy oursite.com/ESW/Images/2123_fuel_line_clamps.jpg) style clamps. Oh, and of course some fuel injector line. I went with a high flow fuel filter from Steeda also.

edit: replace front upper and lower control arm bushings with the Moog bushings I have sitting in my garage that have been there for 4 months.

Sell this Zex nitrous kit, and buy a more reliable one. Either NX or NOS.

Replace my trans when it goes, I'm sure it's on borrowed time. 173K and counting.

[babbage]

Did I teach a Mighty Marauder guy something? You'll want to use a brake line cutter, and some of these (http://commonwealthinc.ca.c9.previewy oursite.com/ESW/Images/2123_fuel_line_clamps.jpg) style clamps. Oh, and of course some fuel injector line. I went with a high flow fuel filter from Steeda also.

lol - how much is the filter to replace? I like to do mine every 15K.

[a_d_a_m]

I forgot to add badgeless to my above post Yuck! :puke:

[CWright]

Forgot something

New Wilwoods kit for front. :D

[91Sherwood]

Definitely getting an audio upgrade....with some coll speakers and amp.
Also a custom rims....20's.....and rear spoiler and tint windows...
i also like to change the headlights for some angel eyes but i dont they make this lights for this car.....

[DTUB]

Here's my list-

* SW coated long tubes
* high flow cats
* forged short block
* polished 3.4 Wipple
* converter
built tranny
80lb inj.
return style fuel system for E-85
Killer Chiller
fiberglass cowl hood
and a bunch of little stuff

* purchased last month

[twin03]

SW long tube headers, Jmod, a new paint job...

[LANDY]

Here's my list-

* SW coated long tubes
* high flow cats
* forged short block
* polished 3.4 Wipple
* converter
built tranny
80lb inj.
return style fuel system for E-85
Killer Chiller
fiberglass cowl hood
and a bunch of little stuff

* purchased last month nice, who is building your shortblock?

[DTUB]

I picked up a 3000 mile 04 cobra short block and plan on freshening up my heads with new compcams springs, seals and valve job but I might build up my MM short block to save some weight.

[TAKEDOWN]

^^^ Wow, you definitely don't mesS around! ^^^

[rossv1]

SS brake lines
Suncore Industries rear conversion kit
New fog lights
Widen the rear wheels
And maybe h.i.d. conversion for both top and bottom lights

[FordNut]

Install the new cats.
Dyno tune.
Maybe figure out a bolt-in roll bar setup so I can legally run at the strip.
Maybe fix oil leak (gotta pull engine to do it, that's the maybe part).
Maybe 9" rear end (custom and expensive).

[hotford]

Install my front Brembo brake kit
Install my 31 spline axles and carrier
Install my diff gridle
Install my new OEM struts with new springs
Install my new front rims with my new tires.
get a fresh tranny from lidio.

everything is ready to go

[napolitano]

Duel Aeroforce gauges, widened rear wheels along with new tires, powder coat rims and lastly if I see one more *$&%##$%&@#$$% paint chip on my car I'm getting it painted midnight blue. It might take me a year to find a good paint guy though.

[SGT_MERC]

Window switch for the nitrous
RPM gauge
A/F gauge
Electric nitrous pressure gauge
Fuel pressure gauge
Three pod A-pillar set up
Upper and lower control arms
Front and rear Metco sway bars
Watts Link bar
Mallory fuel pump
Marauder headlights and corner lights
Everything sitting in the garage and waiting for spring.

[LANDY]

stainless works lt's
front sway bar
dynotune
install the 31 spline setup i have in the shed
move into a house so i can tear the car apart and put it back together whenever i feel like it.

[ImpalaSlayer]

clean out the garage.....

[2,4shofast]

I made one of these last year and didnt get it all complete, so this year I hope to finish what I didnt get to in 2010.

[BLACK SHEEP]

Vehicle purchased 12-16-10

12-18-10 Tint
12-22-10 ordered K&N CAI...installed.
12-26-10 ordered Eibach fronts....received email saying not available...ordered from another company Out of stock everywhere and discontinued. :(
12-26-10 ordered front/rear SB from Sparta....pending shipment (01-05-11) per email
12-29-10 ordered the front splitter thingy. Got the wrong part. LOl. Only $22 so no biggie. Will do the mach1 chin spoiler thingy.

Next on the list to be ordered...

1-4.10s DONE and installed. :D
2-Tune Awaiting a call back. ;)
3-BBK
4-LTs-full exhaust (still reading on Kooks vs. SW)...major debate...I know...lol.
5-pending some $$ in my paypal, will get the dead pedal from BC4E.

Any group buys coming up would be great. Anybody? :D

Updated in RED.

[MOTOWN]

lets see install my triple pillar gauge pod, finish my led conversion, install my ddm hid fogs, order my intake spacer,get my dead pedal from bigcars, then do the jl woofer mod,and then more mods!

[duhtroll]

1) Make sure hitching problem is solved (bucking at 2200 RPMS on highway - previous threads) I think I got it, but I have thought that before...

2) Fix squeaks in center console and tighten down sub in trunk.


Oh, MODS, I get it.


1) Recoat OEM wheels with powder clear or textured black or black chrome.

2) MAYBE tint rear windows 35%

I think I have done everything else.

[SC Cheesehead]

1) Make sure hitching problem is solved (bucking at 2200 RPMS on highway - previous threads) I think I got it, but I have thought that before...

2) Fix squeaks in center console and tighten down sub in trunk.


Oh, MODS, I get it.


1) Recoat OEM wheels with powder clear or textured black or black chrome.

2) MAYBE tint rear windows 35%

I think I have done everything else.

I'm thinking window tint as well, but not sure how dark I want to go.

[Marauderman]

I'm thinking window tint as well, but not sure how dark I want to go.

I'd stay around 35% is safe to keep surrounding LEO's off your glass detector stop.

[rayjay]

I'd stay around 35% is safe to keep surrounding LEO's off your glass detector stop.

You would be correct Sir, depending on your states laws.

[duhtroll]

Up here you can go as dark as you want on the rears. We aren't allowed to touch the fronts. Though I realize your comment it is likely to indicate that making the rears that dark could make the fronts look tinted too.

Then in the case of that stop we see what type of LEO we have - one that apologizes and admits the mistake or one that makes up some BS reason why they stopped you in the first place.

So I see your point.


I'd stay around 35% is safe to keep surrounding LEO's off your glass detector stop.