What else?

[burkem]

What else is needed to make this kit work with my 03 Marauder. Here's whats included with the kit.

Supercharger kit (Most of it)
I have a used '03 Cobra unit with 18k miles. It is the supercharger, plenum,throttle body,accelerator cable bracket, inter cooler, fuel rails, 39lb. injectors and lower intake. NEW: Auto meter boost gauge and a Cobra heat exchanger. USED: lower Metco 4lb. pulley with hub, inter cooler reservoir and 90mm Lightning MAF.

Thanks

[LANDY]

Pm impalaslayer he will point u on the right direction.

[SC Cheesehead]

What else is needed to make this kit work with my 03 Marauder. Here's whats included with the kit.

Supercharger kit (Most of it)
I have a used '03 Cobra unit with 18k miles. It is the supercharger, plenum,throttle body,accelerator cable bracket, inter cooler, fuel rails, 39lb. injectors and lower intake. NEW: Auto meter boost gauge and a Cobra heat exchanger. USED: lower Metco 4lb. pulley with hub, inter cooler reservoir and 90mm Lightning MAF.

Thanks

Intercooler heat exchanger, alternator and tensioner mounting bracekets, modified crossover tube, GT fuel pump, BAP, MAFia, Cobra air intake tube, K&N air filter, K&N mounting adaptor, an additional belt tensioner, additional idler pullies, battery relocation parts, EGR bypass, misc fabricated brackets, dyno tune. Check out this thread for more info.

http://www.mercurymarauder.net/forums/showthread.php?t=60366

I also highly recommend musclemerc's catch can set-up.

[Georges93LX]

What else is needed to make this kit work with my 03 Marauder. Here's whats included with the kit.

Supercharger kit (Most of it)
I have a used '03 Cobra unit with 18k miles. It is the supercharger, plenum,throttle body,accelerator cable bracket, inter cooler, fuel rails, 39lb. injectors and lower intake. NEW: Auto meter boost gauge and a Cobra heat exchanger. USED: lower Metco 4lb. pulley with hub, inter cooler reservoir and 90mm Lightning MAF.

Thanks

I posted on this site and CVN that this was SOLD. Sorry.

[RacerX]

Intercooler heat exchanger, alternator and tensioner mounting bracekets, modified crossover tube, GT fuel pump, BAP, MAFia, Cobra air intake tube, K&N air filter, K&N mounting adaptor, an additional belt tensioner, additional idler pullies, battery relocation parts, EGR bypass, misc fabricated brackets, dyno tune. Check out this thread for more info.

http://www.mercurymarauder.net/forums/showthread.php?t=60366

I also highly recommend musclemerc's catch can set-up.
And 60# injectas! ;)