View Full Version : Check engine light!!!!
Smalldogg/03mm
01-13-2011, 02:33 PM
Letting the car run this morning and check engine light pop on .. The code are as follow::
P0602
P0605
P1211
P1690
Was just wondering what they were an is it a easy fix.. Not a mech- by far.. Barely can put my shoes on the right foot..: looking down:.... Thanks
computertech
01-13-2011, 03:18 PM
a quick paste to Google comes back with many leads.......Hope that helps you out
:burnout:
ctrlraven
01-13-2011, 03:30 PM
P0602 Replace PCM.
P0605 PCM Read Only Memory Error
P1211 Injector Control Pressure Above/Below Desired
P1690 Wastegate Control Valve Error
This guy had the same error codes as you. Seemed to be a lot of crap in his gas tank that cause the fuel pump to be faulty.
http://www.allfordmustangs.com/forums/4-6l-tech/184919-codes-predator-tune-po602-po605-p1211-p1690.html
Smalldogg/03mm
01-13-2011, 04:28 PM
P0602 Replace PCM.
P0605 PCM Read Only Memory Error
P1211 Injector Control Pressure Above/Below Desired
P1690 Wastegate Control Valve Error
This guy had the same error codes as you. Seemed to be a lot of crap in his gas tank that cause the fuel pump to be faulty.
http://www.allfordmustangs.com/forums/4-6l-tech/184919-codes-predator-tune-po602-po605-p1211-p1690.html
Thanks will take to get looked at tomorrow.. Thats crazy the same codes different problems.. Mines drive good respond good, but it's just kicking those codes.. And it's idling at a 1000 easy.. When I put end gear it's takes off by itself.. Like I got a dam track motor...
SpartaPerformance
01-13-2011, 05:11 PM
Does it have an aftermaket tune? The 602 and 605 codes have to do with the VID in the EEPROM of the PCM. Sounds like you may have uploaded an invalid file or bad tune.
Smalldogg/03mm
01-13-2011, 06:14 PM
Yeap I got that da- diablo predator programmer..
fastblackmerc
01-13-2011, 07:12 PM
Yeap I got that da- diablo predator programmer..
Is it the correct programmer for your MM?
Smalldogg/03mm
01-13-2011, 07:43 PM
Is it the correct programmer for your MM?
I would think so.. But I was talking to another guy who had the same programmer and his did much more.. Like hd could adjust his gear ratio fr 3 whatever to 4 whatever.. On mines it says tires something.. I think I need a up date on it.. Same programmer different stuff. I have a appointment Saturday to get it tune. But really hate to do it without headers etc ...
SpartaPerformance
01-13-2011, 09:10 PM
Just as I thought, get it properly tuned and the issues will go away.
Smalldogg/03mm
01-14-2011, 04:56 AM
Just as I thought, get it properly tuned and the issues will go away.
Thanks U GUYS NO SOMES---!!!!!!!!!!!!!!
ctrlraven
01-14-2011, 07:00 AM
Get rid of that diablo junk. I hope whoever you're getting to tune the car uses SCT gear.
SC Cheesehead
01-14-2011, 07:01 AM
Get rid of that diablo junk. I hope whoever you're getting to tune the car uses SCT gear.
^^^^^^ Gotta agree. ^^^^^^
Smalldogg/03mm
01-14-2011, 08:24 PM
Get rid of that diablo junk. I hope whoever you're getting to tune the car uses SCT gear.
I am!!!:) so how much for one of those SCT programer.. Am I wrong for the end of the post..
SpartaPerformance
01-14-2011, 09:05 PM
SCT SF3 (https://ssl111.webhosting.optonline.ne t/spartaperformance.com/merchantmanager/product_info.php?products_id=3 10)
10% off with coupon code SCT
justbob
01-14-2011, 10:24 PM
What you are seeing on the predater is revolutions per minute for tire size or tire height in diameter to correct your speedo and shift points and there probably isn't a different tune for gears loaded on it.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.