View Full Version : Offset Stock Marauder Wheel.
stevemarauder
01-14-2011, 07:40 AM
Just was wondering the offset of the factory rims.Can anybody help!
Silver Birch Society
MOTOWN
01-14-2011, 07:43 AM
i want to say its 50mm, but im not 100% sure, i may need a life line:help:
gdmjoe
01-14-2011, 07:57 AM
.
Offset is 45mm.
http://www.gdmjoe.com/frppmmrim.jpg
.
MOTOWN
01-14-2011, 08:03 AM
.
Offset is 45mm.
http://www.gdmjoe.com/frppmmrim.jpg
.
i stand corrected!:bows:
stevemarauder
01-14-2011, 08:09 AM
Thank you!!!
Silver Birch Society
Joe Walsh
01-14-2011, 08:21 AM
I don't know about that FRPP description....:dunno:
I've always had them as:
18 x 8"
6.5" backspacing
+50mm offset
stevemarauder
01-14-2011, 08:35 AM
230507125688 ebay item # Just was wondering if these will http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_rdc=1&item=230507125688&ru=http%3A%2F%2Fshop.ebay.com% 3A80%2F%3F_from%3DR40%26_trksi d%3Dp5197.m570.l1313%26_nkw%3D 230507125688%26_sacat%3DSee-All-Categories%26_fvi%3D1&viewitem=work?:confused:
Thinking of going with 18x9's all the way around,but don't know exactly what to order on the offset he has listed.
MOTOWN
01-14-2011, 08:44 AM
order the 45mm offset so your wheels dont stick out
stevemarauder
01-14-2011, 08:50 AM
18x9's will work all the way around with no rubbing issues in the front?:confused: with the 45 mm offset.
MOTOWN
01-14-2011, 08:51 AM
yeah as long as your tire isnt too big
stevemarauder
01-14-2011, 08:54 AM
thanks what size would u recommend in the front and rear??:confused:
MOTOWN
01-14-2011, 08:57 AM
i run a 295/45 18 in the rear, for the front i would go with a 245/50 18
stevemarauder
01-14-2011, 08:58 AM
Thank you!! Are your rear rims widened?:confused:Or stock?
MOTOWN
01-14-2011, 09:00 AM
there stock now, but im going to widen them to 18x10, and then chrome!
JBeezy
01-19-2011, 08:38 AM
230507125688 ebay item # Just was wondering if these will http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_rdc=1&item=230507125688&ru=http%3A%2F%2Fshop.ebay.com% 3A80%2F%3F_from%3DR40%26_trksi d%3Dp5197.m570.l1313%26_nkw%3D 230507125688%26_sacat%3DSee-All-Categories%26_fvi%3D1&viewitem=work?:confused:
Thinking of going with 18x9's all the way around,but don't know exactly what to order on the offset he has listed.
I'm interested in seeing what this looks like on a MM. I like those wheels a lot. Seen them on a newer Mustang. It has 20's on the rear and 19's on the front I think.
Smalldogg/03mm
01-19-2011, 01:14 PM
i run a 295/45 18 in the rear, for the front i would go with a 245/50 18
What's wrong y r u widen the rims on the back. Do the 295/45/19 rub.. Thanks
MOTOWN
01-19-2011, 11:20 PM
What's wrong y r u widen the rims on the back. Do the 295/45/19 rub.. Thanks
im going to widen them to 18x10 so i can run a 305/45 18, even with the 295s it would look better on a wider wheel, they dont rub.
JBeezy
01-20-2011, 07:01 AM
Wish someone would just widen a couple sets of wheels and sale me 2. I think this is the route I'd like to take as well
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.