Naake qa1 upgrade

[Peter]

Who do I contact to obtain a set of these?

[Dennis Reinhart]

Who do I contact to obtain a set of these?



Peter I can get them or buy direct from them.

[Peter]

Peter I can get them or buy direct from them.
What are the costs for the various options and do you have them in stock?

[Dennis Reinhart]

Just give me a call when you have time.

[Hotrauder]

Peter, do yourself a favor and call Mike Naake direct at 916-771-0109. He is the man. He will steer you correctly and may still discount as he did for the Marauder group buy a few years ago. Many of us have been riding them since and they are the right choice for the road, and important to you and I, the track. You can check out www.naake.com (http://www.naake.com). He has an email address but prefers phone contact as email is not an effecient way to cover the info to make the QA-1 install go without a hitch. They built our cars from the parts bins and they are not all the same suspension compontents. ie. bolts and bushings. Talk with Mike. He knows this inside out. Dennis

[cougar9150]

Just be prepared to make your own lower mounts. I so far love the rears but have had nothing but issues with the fronts. I would also get a stiffer spring rate for the front because my 450lb springs sag (more on one side than the other grrr) and bottom out.

Unfortunately the style spring from QA1 that is supplied with kit only comes in different spring rates but nothing taller so you can choose 10" long @ 450 or 550lbs unless you want to manufactur a custom spring cap and use a different version of the spring.

I myself am stealing fordnut's design and making a lower mount to install the factory springs onto the QA1s.

Mine is currently my DD so it may have an affect on my opinion but if I had to do it again it would be QA1 in the rear and KYB with Eibachs in the front.