MM Door hinges

[Bruce Wayne]

Hi Everyone, I was wondering if anyone could supply me with the part numbers for the drivers side door hinges? I am detecting quite a bit of play on this door, and would like to tighten this up. Also does anybody have any issues with the door moulding on top of door, bottom of window, this seems to be bubbling up. I don't think we can buy this part anymore?

[MOTOWN]

your door hinge can be repined, and bushings added any good body shop should be able to do this.

[MM2004]

Hi Everyone, I was wondering if anyone could supply me with the part numbers for the drivers side door hinges? I am detecting quite a bit of play on this door, and would like to tighten this up. Also does anybody have any issues with the door moulding on top of door, bottom of window, this seems to be bubbling up. I don't think we can buy this part anymore?

I don't think window moulding would be an issue.

CV and GM should interchange on our MM's??

Mike.

[RoyLPita]

6W1Z.5422810.A Lists for $62.72. Comes in flat black.

BTW, I have only heard of hinge pin replacements for Fox body vehicles.

[Dragcity]

6W1Z.5422810.A Lists for $62.72. Comes in flat black.

Is that the price for the set of just one piece?

Are the ones with the bright work still available?

Believe it or not, I replaced mine in 2006 due to the bubbling. Now they need it again. This should be the last time I need to do it, as my marauder is finished with winter service.

[MOTOWN]

6W1Z.5422810.A Lists for $62.72. Comes in flat black.

BTW, I have only heard of hinge pin replacements for Fox body vehicles.

this is a common repair that can be done on any hinge simply by removing the pin and adding bushings to compensate for wear and tear:burnout:

[RoyLPita]

Is that the price for the set of just one piece?

Are the ones with the bright work still available?

Believe it or not, I replaced mine in 2006 due to the bubbling. Now they need it again. This should be the last time I need to do it, as my marauder is finished with winter service.

This is for the lower door hinge only.

[Dragcity]

Ohhhhh. I thought you were addressing the belt moulding first. Sorry...

[justbob]

this is a common repair that can be done on any hinge simply by removing the pin and adding bushings to compensate for wear and tear:burnout:
Very true, I've done many. If there is no listing, ANY bearing sales company will be able to find proper copper bushings to fit.

[BUCKWHEAT]

Hi Everyone, I was wondering if anyone could supply me with the part numbers for the drivers side door hinges? I am detecting quite a bit of play on this door, and would like to tighten this up. Also does anybody have any issues with the door moulding on top of door, bottom of window, this seems to be bubbling up. I don't think we can buy this part anymore?

OK, so is the easiest way to replace the hinges:
1. get a set of junkers off of a CV in the junkyard
2. go to the bearing shop & get bushings
3. take junkers apart, paint, install bushings & assemble with old pins
4. remove originals & set aside
5 install redone junkers on door?

What's missing?

[EMAS]

You can purchase hing pin and bushing kits at your FLAPS for many cars not sure if they lists kits for the late model Fords or not but the same hinges have been in use since 92 and are shared among many Ford models.

[Bruce Wayne]

Any part numbers for the upper and lower hinges? Thanks

[RoyLPita]

6W1Z.5422810.A Lists for $62.72. Comes in flat black.

I only posted the price for the lower one. The upper one requires removal of the dash to replace.

[Bruce Wayne]

Thanks for that, I don't think I'll be replacing the top one any time soon, to remove the dash is too big of a job for this backyard mechanic.

[Peter]

Hinge upper 6w1z5422800 a http://www.tascaparts.com/partlocator/index.cfm?action=searchCatalog OEM&siteid=213668
hinge lower 6w1z5422810 a http://www.tascaparts.com/partlocator/index.cfm?action=searchCatalog OEM&siteid=213668

[EMAS]

Thanks for that, I don't think I'll be replacing the top one any time soon, to remove the dash is too big of a job for this backyard mechanic.

Now I can't say I've done it on an 03 but in the earlier cars it is possible to replace it w/o removing the dash, you just have to have the correct combo of extensions and u-joints.

[J-MAN]

Send computertech a PM, he replaced the door hinges and the door molding on his SB.

[boatmangc]

Hey Brian, do you have a part number for those window moldings?
I need one of them for each of the rear doors

[Peter]

hey brian, do you have a part number for those window moldings?
I need one of them for each of the rear doors
f2my 5425R560 d

[RacerX]

One lower door hinge on it's way... :( Dammit...