Eaton swap pulley install

[jay03merc]

can i get some info on adding the lower supercharger pulley to my mm.
i currently have underdrive water pump and crank pulleys that was off an
01 cobra. would it be ok to use these pulleys or do i need to swap back to
factory pulleys first?

also can you give me some info on installing the lower charger pulley
i see alot of stock lowers for sale with cage? what is the cage for and
is it needed? if i by aftermarket pulleys do i still need a cage?
does anyone have some pics of the pulleys installed on mm.?

[ImpalaSlayer]

can i get some info on adding the lower supercharger pulley to my mm.
i currently have underdrive water pump and crank pulleys that was off an
01 cobra. would it be ok to use these pulleys or do i need to swap back to
factory pulleys first?

also can you give me some info on installing the lower charger pulley
i see alot of stock lowers for sale with cage? what is the cage for and
is it needed? if i by aftermarket pulleys do i still need a cage?
does anyone have some pics of the pulleys installed on mm.?


1. no you can not use udps, you must use the stock pullys

2. you can not use a stock cobra pulley, you must use an aftermarket. it simply bolts to the factory balancer

3. have you looked through either of the threads i did on the 2 cars ive put together?

[fastblackmerc]

1. no you can not use udps, you must use the stock pullys

2. you can not use a stock cobra pulley, you must use an aftermarket. it simply bolts to the factory balancer

3. have you looked through either of the threads i did on the 2 cars ive put together?

"have you looked through either of the threads i did on the 2 cars ive put together?"

:thinker:

Maybe it's just me but that would be the first place I'd look..............

[jay03merc]

yes i did see alot of your post that i could find related to the swap.i got
alot of good info from EATON SWAP PART TWO post you had.i guess i have just over lookes some of the things. i didnt see any pics of the lower
pulley after install or any pics of modifing the cross over pipe.i got the instructions on how much to cut out,but pics help alot to.

sorry for asking alot of questions that probably has been answered somewere else in the forums. im just trying to cover all ends before i start
trying to avoid any surprises and wont to make sure i have all the right
parts.
thanks again

[SC Cheesehead]

http://www.mercurymarauder.net/forums/showthread.php?t=60366

Metcomotorsports and order Product ID: MMC0001 Supercharger Installation Kit (upper and lower pullies, should be able to purchase the lower pulley and hub separately if desired).

http://i159.photobucket.com/albums/t153/bob6364/eaton%20stuff/MMC0001-1.jpg

http://www.metcomotorsports.com/

Give Rick or Kristi a call, tell 'em Rex sent you.

[ImpalaSlayer]

yes i did see alot of your post that i could find related to the swap.i got
alot of good info from EATON SWAP PART TWO post you had.i guess i have just over lookes some of the things. i didnt see any pics of the lower
pulley after install or any pics of modifing the cross over pipe.i got the instructions on how much to cut out,but pics help alot to.

sorry for asking alot of questions that probably has been answered somewere else in the forums. im just trying to cover all ends before i start
trying to avoid any surprises and wont to make sure i have all the right
parts.
thanks again

if i take pic of a tube thats been modded, you wouldnt be able to really tell the difference. it just has to shrink an inch and lower by an inch to clear the blower snout.