Looking at a set...

[Blk Mamba]

...of 05-09 Mustang Wheels with bands, and sensors, for the MM, would they work ( offset, backspace, Etc.), and if so what about the bands, and sensors?

[a_d_a_m]

The offset is fine, but I don't know anything about the sensors.

[05crownsport]

I have run my 06 mustang wheels on my 05 vic. They are the 18" polished wheels. For those wheels I used a 1/4 inch spacer to clear calipers. Not sure if vics and marauders have dissimilar calipers. My vic is sport model. If I get a chance, I will throw them on to get some pics for you.

[Spectragod]

All 4 TPMS sensors are worth $100-$150 on the used market. The wheels will fit.

[fastblackmerc]

I have run my 06 mustang wheels on my 05 vic. They are the 18" polished wheels. For those wheels I used a 1/4 inch spacer to clear calipers. Not sure if vics and marauders have dissimilar calipers. My vic is sport model. If I get a chance, I will throw them on to get some pics for you.

1/4 inch spacer :eek::eek::eek:

How many threads are left for the lug nuts?

[Blk Mamba]

The wheels are Steeda aftermarket Saleen style, with tires, and are less than the front tires I was planning on buying.

[MOTOWN]

1/4 inch spacer :eek::eek::eek:

How many threads are left for the lug nuts?

i run 1/4" spacers on the rear, theres plenty thread left

[a_d_a_m]

I have run my 06 mustang wheels on my 05 vic. They are the 18" polished wheels. For those wheels I used a 1/4 inch spacer to clear calipers. ...there are plenty of people running Mustang wheels, from Bullitts to Fanblades to GT500s, on their '03-and-up Panthers and nobody is running spacers to clear for brakes... :confused:

[05crownsport]

The 18" polished mustang wheels rub the caliper on the front of my cv. Marauder front brakes must be different.

[05crownsport]

Oh, there's 1/4 less threads left......:banana2:

[kmastl]

Dibs on the OEM's?

[Blk Mamba]

I'll be keeping the OEM's, maybe putting them on the '96 CV.

[JOEMERC]

and you will have a offset problem with that year cv ,03 and up is way different then pre-03 .wheels will be way inside wheel well.

[Blk Mamba]

Just need a half inch spacer in back, and a quarter in front.