PDA

View Full Version : Error On software


yryr999
02-13-2011, 05:55 AM
Hi every one ... I have SCT X3
yesterday I was want to change the tune on my car so when I plug the cable the tuner just flash and be silent and show on the monitor i barely see it error on software ..
notice :-
when i plug the tuner in the PC its work I see the tunes every think ...
musclemerc
02-13-2011, 07:12 AM
The tuner should display something when pluged into a OBD port. Turn the key forward and make sure the plug is all the way in. Tune or not it should work for scanning codes, data logging, etc.
SID210SA
02-13-2011, 07:36 AM
Make sure all the pins are straight.
yryr999
02-13-2011, 08:23 AM
Before its working .. but last week its doesn't so when I plug the cable on the OBD port its flashing one time after that the display is error on software without the monitor light .. if u wanna a video I can tkae some shots for u
musclemerc
02-13-2011, 10:21 AM
Take the tuner to ANY 96 and up car and try it there. Again tune or no tune the xcal will operate as a code reader and data logger. You have either a dead xcal or OBD port