PDA

View Full Version : Running rough...still



Big House
02-19-2011, 10:57 AM
Ok I have changed the oil, the fuel filter and even did the Zack filter mod and though she runs better, at WOT the power and sound is still not there. BTW, what is the thing that sits atop the passenger side cam cover. what is the part number and how hard is it to replace? Could that be causing my sputtering at WOT? And to top it off, there are no codes being thrown so I don't know where else to look.

musclemerc
02-19-2011, 11:11 AM
The thingy on the PS cam cover is a pcv valve. You sound like you need COP's!!!!
But first remove and degrease the pcv valve, then clean the MAF

Blackened300a
02-19-2011, 11:12 AM
You sound like you need COP's!!!!


+1
It wont throw a code if it breaks up under load.

NATEHAWK
02-19-2011, 11:56 AM
House Holla at cha boy I think you may have a bad coil pack...i got a tool that can help us check each one to verify this. I work two jobs now so my time is limited but hit me up I can help bro...

Big House
02-19-2011, 07:09 PM
I will. Just let me know when you are available.

justbob
02-20-2011, 08:37 AM
Have you datalogged FPDC??