PDA

View Full Version : Need COP options


Big House
02-22-2011, 05:26 PM
I was trying to wait this issue out to the spring but the time is now. I need to get some COPs as soon as possible. Are GMS COPS better than OEM and if so does anyone have a part number? Thanks.

Big House
musclemerc
02-22-2011, 05:59 PM
Both the MSD and GMS are better than stock but the stock COP's can handle ALOT of HP.

Personally I run OEM's with LFP connectors
Big House
02-22-2011, 06:01 PM
Any advantage...MPG or power?
musclemerc
02-22-2011, 06:06 PM
No you will see neither with the upgrade. I use to get new OEM's on the cheap House. Maybe I can ask a few of my friends for you.
Big House
02-22-2011, 06:10 PM
Copy that...I need to push the button a on a new set like yesterday.
musclemerc
02-22-2011, 06:15 PM
I hear you.... I hope I can get a set for you. They are normally a little over $100.00 for a new set of 8. I will PM you either way.
Big House
02-22-2011, 06:17 PM
Ready to go when ever you are. Thanks.
Blackened300a
02-22-2011, 06:19 PM
I hear you.... I hope I can get a set for you. They are normally a little over $100.00 for a new set of 8. I will PM you either way.

Best deal on the net. I have them in my engine right now and used my OEMs as spares.
LANDY
02-22-2011, 06:28 PM
Yo, T if you can get two sets, I need some too.
musclemerc
02-23-2011, 06:47 AM
Well I got some info from my friend, he has only 2 sets left so House you and Landy got them. These are brand new take off's from a -0- mile crate motor. They are original Motorcraft's and will cost you $135.00 shipped

You two send me a PM for the paypal addresse and you will have them by next week.

Please everyone else DO NOT send me a I need COP's too PM, these are the last of the last and I have posted these long enough. The original price of $110.00 and the new $135.00 everyone should have gotten in on this deal.

I got a spare set!
ctrlraven
02-23-2011, 06:50 AM
Big House, also look into getting some GMS coil connectors, summitracing.com sells them.
musclemerc
02-23-2011, 06:57 AM
Birdman the LFP connectors are made by GMS and are exactly the same for alot cheaper.

http://www.lightningforceperformance. com/Granatelli_HIGH_OUTPUT_Coil_On _Plug_Connectors_4_Valve.html
Blackened300a
02-23-2011, 06:57 AM
Birdman the LFP connectors are made by GMS and are exactly the same for alot cheaper.

http://www.lightningforceperformance. com/Granatelli_HIGH_OUTPUT_Coil_On _Plug_Connectors_4_Valve.html

+1
Those are the ones I run for $50 cheaper.
Big House
02-23-2011, 08:49 AM
MM,

PM sent. Thanks.
musclemerc
02-23-2011, 08:56 AM
PM's replied!

House, good luck with the repairs. With the money you saved go for the LFP connectors. I have had them on my MM for awhile now.

Good Luck Guy's!!!
LANDY
02-23-2011, 09:05 AM
I highly appreciate it Travis.