View Full Version : Steigmeier Stage 5
dohc324ci
03-03-2011, 11:05 PM
Anyone here running a Ported Eaton Posi or Steigmeier?
BODYMAN
03-03-2011, 11:16 PM
Buckwheat has steigies snake bite package on his Trilogy. Bobbys lives in my neck of the woods known him a long time no one better at porting Eatons. When he did Buckwheats I think they had to go to larger pulley cause it was making to high boost after port gob. If you can get youre hands on one for Eaton swap:2thumbs:
dohc324ci
03-03-2011, 11:28 PM
Yeah might as well go for the stage 5 Eaton why mess around...lol
I found a Stage 5 Steggy with a Port Matched Polished AccuFab Plenum setup for a single blade TB. With supporting mods they claim 535HP. So looking to make at least 550rwhp with my setup if not more.
FordNut
03-04-2011, 03:45 AM
Go ahead and get the Whipple 2.3 twin screw.
SC Cheesehead
03-04-2011, 04:57 AM
DOOM's running a ported Triolgy.
musclemerc
03-04-2011, 05:59 AM
Go ahead and get the Whipple 2.3 twin screw.
^^^What he said
Joe Walsh
03-04-2011, 06:03 AM
IIRC: Rich Long had his Trilogy/Eaton "Posi-Ported" by Brian at PosiPerformance.
http://www.posiperformance.com/
I think that Nate/'NateHawk' bought Rich's Marauder.
SC Cheesehead
03-04-2011, 06:27 AM
IIRC: Rich Long had his Trilogy/Eaton "Posi-Ported" by Brian at PosiPerformance.
http://www.posiperformance.com/
I think that Nate/'NateHawk' bought Rich's Marauder.
I think Doomie had his done at PosiPerformance as well.
RacerX
03-04-2011, 07:31 AM
Go ahead and get the Whipple 2.3 twin screw.
^What Brian said! Look around, you can get them for some pretty good deals used, rebuilt or even new on svtperf. You have the cubes to make more. I'd worry about beefing up the rear!
BODYMAN
03-04-2011, 08:10 AM
Go ahead and get the Whipple 2.3 twin screw.
+1 on that Brian
BODYMAN
03-04-2011, 08:19 AM
Yeah might as well go for the stage 5 Eaton why mess around...lol
I found a Stage 5 Steggy with a Port Matched Polished AccuFab Plenum setup for a single blade TB. With supporting mods they claim 535HP. So looking to make at least 550rwhp with my setup if not more.
Ya with youre motor let it really breathe But I wouldnt go by someone w/ aTermi made as There is quite a bit of loss between auto & T56. Personally if I was U I would be shoping for a 2.3 TS. If you get a ported Eaton for single blade there is another chunk of money for diff TB. My orig plan was get a used Eaton & have Bobby do it up I just really dont like how with a Eaton @ high R's air flow gets turbulent. Look around on SVT there is always atleast a few on there.
swordfish
03-04-2011, 08:28 AM
I'm running a stage 4 Ported Eaton by Steigmeier.
dohc324ci
03-04-2011, 09:33 AM
Go ahead and get the Whipple 2.3 twin screw.
Your killing me Mr. 750
^^^What he said
^What Brian said! Look around, you can get them for some pretty good deals used, rebuilt or even new on svtperf. You have the cubes to make more. I'd worry about beefing up the rear!
I know it! Trans...rear....tires
+1 on that Brian
Ya with youre motor let it really breathe But I wouldnt go by someone w/ aTermi made as There is quite a bit of loss between auto & T56. Personally if I was U I would be shoping for a 2.3 TS. If you get a ported Eaton for single blade there is another chunk of money for diff TB. My orig plan was get a used Eaton & have Bobby do it up I just really dont like how with a Eaton @ high R's air flow gets turbulent. Look around on SVT there is always atleast a few on there.
Going off of a NA MM 230rwhp to an Eaton 430rwhp (jdennings002) so if I am at 350rwhp (have yet do dyno since cams, heli coil fix) should put me at 550rwhp.
You guys are really making my head hurt....Yeah I may just hold out for the Whipple but they are pricey. A used stage 5 Steggy w/Accufab Plenum and TB is going to be 1k give or take when all said and done. This is "supposed" to be the redesigned Torque Plate version to resolve the cracked welds ala NAZ. I may just pickup all the other pieces I need to complete the swap and wait until I find a deal on a Whipple 2.3. I missed out a guy had one brand new for $2700.
ImpalaSlayer
03-04-2011, 10:03 AM
Go ahead and get the Whipple 2.3 twin screw.
^^^What he said
do what they say, you will thank us.
CobraSVT657
03-04-2011, 10:07 AM
Ive got a Posi ported Eaton on mine... still finishing the install so can't really give you any feedback yet..
babbage
03-04-2011, 10:24 AM
Might as well get the Stage 6 :D
Actually with all that you have done, the whipple seems to be on par with the rest of what you have.
Had both companies do work.
Posi performance = :rock:
Steigemier = :down: :puke: :shake:
In other words
FAIL!!!
Had both companies do work.
Posi performance = :rock:
Steigemier = :down: :puke: :shake:
In other words
FAIL!!!
Damn, tell us you really feel, lol.
SC Cheesehead
03-04-2011, 10:59 AM
Had both companies do work.
Posi performance = :rock:
Steigemier = :down: :puke: :shake:
In other words
FAIL!!!
What's wrong with Stiegie?
Damn, tell us you really feel, lol.
Ok! :soap:
Steigemier sucks donkey balls.
Wouldnt send my worst enemy to them! (well maybe a mopar) :D
What's wrong with Stiegie?
When my blower needed to be rebuilt i sent it to them. (blower sounded like it had rocks in it)
When i got it back it was worse!!! :eek: :mad2:
Sent it back AGAIN for repair. They apologised and gave me a stage 4 port for their fu:censor:k up.
Less than 3k miles later it needed to be rebuilt AGAIN! :argh:
BTW rex this is where rumors come from because as:censor:holes want be in my business and have no idea whats going on! :shake: Bunch of haters! (you know who you are!!!)
Pops was the only one who knew what was really going on! :beer:
Took Zacks advice sent the blower to posi had it fixed & ported
Long story short posi's porting made more power!!! :bows:
Have video & dyno sheets to prove it. :up:
BODYMAN
03-04-2011, 11:24 AM
WOW! That sucks Doom I rember you metioning part of this @ Indy. A friend with a 04 Termi I know had his back 6 times for probs. But I also know of hundreds of happy cust from Bobby? I guess we all have our moments.
A friend with a 04 Termi I know had his back 6 times for probs.
Exactly!!!
Dude it came back WORSE!!! :shake: :fire: :cheesed: :banghead:
WTF!!!
SC Cheesehead
03-04-2011, 12:13 PM
When my blower needed to be rebuilt i sent it to them. (blower sounded like it had rocks in it)
When i got it back it was worse!!! :eek: :mad2:
Sent it back AGAIN for repair. They apologised and gave me a stage 4 port for their fu:censor:k up.
Less than 3k miles later it needed to be rebuilt AGAIN! :argh:
BTW rex this is where rumors come from because as:censor:holes want be in my business and have no idea whats going on! :shake: Bunch of haters! (you know who you are!!!)
Pops was the only one who knew what was really going on! :beer:
Took Zacks advice sent the blower to posi had it fixed & ported
Long story short posi's porting made more power!!! :bows:
Have video & dyno sheets to prove it. :up:
Interesting.
We need to have a chat at KY...
dohc324ci
03-04-2011, 01:32 PM
Hmmm.....
I wonder why the Steigmeier Account on Svtperformance had a "BANNED" designation but what confused the HELL out of me is they are still a vendor on that site? WTH?
Anyway.....
dohc324ci
03-04-2011, 01:34 PM
do what they say, you will thank us.
Sorry Davey boy your input can no longer carry the same weight as before you........sold your SB Eaton:flamer:
J/K - I know it man!!
RacerX
03-04-2011, 01:35 PM
If he paid for a year or two in advance, they have to keep him listed as a vendor. Just like with NAZ here. Not worth getting lawyers involved, the people always find out sooner or later...;)
BUCKWHEAT
03-04-2011, 06:46 PM
Buckwheat has steigies snake bite package on his Trilogy. Bobbys lives in my neck of the woods known him a long time no one better at porting Eatons. When he did Buckwheats I think they had to go to larger pulley cause it was making to high boost after port gob. If you can get youre hands on one for Eaton swap:2thumbs:
Yup, went to a 3.6 inch custom upper pulley to bring the boost down to 15# on my stock motor. Currently running 9 degrees advance to keep the stock motor alive. Be aware, after the porting you will get more s/c whine than before.
ImpalaSlayer
03-04-2011, 06:57 PM
Yup, went to a 3.6 inch custom upper pulley to bring the boost down to 15# on my stock motor. Currently running 9 degrees advance to keep the stock motor alive. Be aware, after the porting you will get more s/c whine than before.
id pay just to have that
Be aware, after the porting you will get more s/c whine than before.
:agree:
And it sounds sooooooooooooo good!!! :beer:
NATEHAWK
03-06-2011, 05:09 AM
IIRC: Rich Long had his Trilogy/Eaton "Posi-Ported" by Brian at PosiPerformance.
http://www.posiperformance.com/
I think that Nate/'NateHawk' bought Rich's Marauder.
You think right
dohc324ci
03-06-2011, 08:10 AM
Yup, went to a 3.6 inch custom upper pulley to bring the boost down to 15# on my stock motor. Currently running 9 degrees advance to keep the stock motor alive. Be aware, after the porting you will get more s/c whine than before.
Buckwheat,
I assume the snakebite is their stage 5 with new torque plate? What pulley where you running prior and how much boost? What are you putting down rwhp? I found 2.3 whipple and a ported steg difference of 2k between blowers.
O's Fan Rich
07-09-2011, 03:29 PM
IIRC: Rich Long had his Trilogy/Eaton "Posi-Ported" by Brian at PosiPerformance.
http://www.posiperformance.com/
I think that Nate/'NateHawk' bought Rich's Marauder.
Yep, it was the first Trilogy Brian did. And he did a fantastic job.
Now if only I'd have listened to Lidio and waited for the bigger injectors.....lol!!!!
MercOut
07-11-2011, 06:42 PM
I just bought a ported steggy eaton, does that mean i should send it to posi to be safe?
I just bought a ported steggy eaton, does that mean i should send it to posi to be safe?
Be safe??? What power are you looking to make? Are you still on your stock block?
Posi performance FTW!!! :rock:
MercOut
07-11-2011, 07:15 PM
reading about your story doesn't make me feel confident in steggy, so yea, to make sure everything's straight.
yea, stock block and aiming for around 500rwhp. Its a stage 2 but could be a stage 4.
500 RWHP on a stock block = BOOM!!!
guspech750
07-11-2011, 07:29 PM
reading about your story doesn't make me feel confident in steggy, so yea, to make sure everything's straight.
yea, stock block and aiming for around 500rwhp. Its a stage 2 but could be a stage 4.
Good luck with that. Let us know how much to replace you engine later;)
MercOut
07-11-2011, 07:39 PM
well i'm new to this whole S/C thing so i guess i set my hopes to high. would have found out sooner or later
dohc324ci
07-11-2011, 09:22 PM
Stage 5 steggys are the ones to stay away from. The torque plates were known to crack at the welds. Stage 4 and lower have no torque plates to worry about.
RacerX
07-12-2011, 06:18 AM
You can run a stage whatever ported sc and if you have enough safe timing and plenty of fuel in your tune, you'll be plenty safe. You won't hit 500rwhp, but, a ported sc reduces charge temperatures and increases efficiency. That's free horsepower right there.
You can run a stage whatever ported sc and if you have enough safe timing and plenty of fuel in your tune, you'll be plenty safe. You won't hit 500rwhp, but, a ported sc reduces charge temperatures and increases efficiency. That's free horsepower right there.
I hit 500 RWHP with mine! ;)
http://www.youtube.com/watch?v=PIuo4lrUSxE
Posi Performance FTMFW!!! :burn: :burnout:
RacerX
07-12-2011, 08:30 AM
Seen it! Love it! Can't remember if you have a stock block though, that's what they're worried about. I believe these engines can take a lot if they are tuned safely. :beer:
Seen it! Love it! Can't remember if you have a stock block though, that's what they're worried about. I believe these engines can take a lot if they are tuned safely. :beer:
04 Cobra block! :burnout:
TERMINATOR :shot:
RacerX
07-12-2011, 08:37 AM
Well then, you can throw even more at it and not worry! :D
Well then, you can throw even more at it and not worry! :D
Whipple. :rolleyes: :whistle:
RacerX
07-12-2011, 08:43 AM
Whipple. :rolleyes: :whistle:
OK!!!! Woohoo!!!!
http://www.lethalperformance.com/whipple_tour_pics/image063.jpg
SC Cheesehead
07-12-2011, 10:02 AM
OK!!!! Woohoo!!!!
http://www.lethalperformance.com/whipple_tour_pics/image063.jpg
Mo' blowa, mo' betta... ;)
Vortech347
07-18-2011, 09:54 AM
I am running a Posi port on our Cobra.
We picked up 54rwhp with no changes other than the blower being ported.
Not only does Brian deliever an incredible product but his customer service is what I feel other companies should strive to be like.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.