"C" heads

[98plmbchtwncar]

I need a set of "C" heads, If anyone has a set they want to get rid of let me know

[Dennis Reinhart]

I need a set of "C" heads, If anyone has a set they want to get rid of let me know


What is a C head.

[musclemerc]

03~04 DOHC cylinder head

[Dennis Reinhart]

I need a set of "C" heads, If anyone has a set they want to get rid of let me know


I have a complete set of 03 Cobra heads and cams brand new for 2K

[massacre]

99+ Conti is the cheapest C-head going........
Coil-on-plug also.

[Dennis Reinhart]

99+ Conti is the cheapest C-head going........
Coil-on-plug also.


The 1999 DOHC head is a non tumble port head that used IMRCS, that are no longer made, and no one makes the spacer, you want 2001 or newer Tumble port heads

[musclemerc]

For 2k they better have a full warranty and installation included.

I agree with massacre, you can get them cheaper!

[Dennis Reinhart]

I need a set of "C" heads, If anyone has a set they want to get rid of let me know


I try and help every one, that is why I told you you do not want C heads, these are brand new Tumble port heads, not used, sure I will warranty them for material defect, if they are overheated by you or install them wrong, will I warranty them of corse not, these heads will be a good choice for a build you can also call me any time for advice or help with your build, and if you can find these for less than 2000 buy them, bare cores from Ford are 800.00 EA.

I respect every ones posts in the for sale or wanted to buy.

Thank you

Dennis A Reinhart

[ImpalaSlayer]

Dennis, you realize the 99-01 heads are the same as 03-04 right? :rolleyes:

[98plmbchtwncar]

to my understanding the c tumble port heads were used from 99 on up. if the 99' heads aren't tumble port what are they then?

[Dennis Reinhart]

to my understanding the c tumble port heads were used from 99 on up. if the 99' heads aren't tumble port what are they then?


They are non tumble port, and require IMRC or IMRC delete plates and as far as I know no one sells them, you can remove the plates out of the IMRC's and weld them up if there alluminum or seal the with epoxy if there plastic, or buy 01 and up tumble port heads. As I said I have a new set for 2K fully assembled with 03 Cobra cams.

[98plmbchtwncar]

thats a little bit out of my price range

[98plmbchtwncar]

so you are saying that they are twin port then?

[RacerX]

Good info/specs here: http://www.sullivanperformance.com/YVS450/tech/tech1.htm