PDA

View Full Version : Hoses


Juice
03-11-2011, 06:31 PM
One of the hoses going into the intake manifold is rotten, I had to tape it up to make sure it stayed sealed until I replace it. I figure if that one is on it's way out, the others aren't far behind. Is there some kind of replacement hose set or something I can get, or do I need to figure out each one individually? I've never done replacement before.

Thanks in advance for any help!
musclemerc
03-11-2011, 06:33 PM
You have to buy the whole tube from Ford last I checked it was 37.00
ImpalaSlayer
03-11-2011, 06:38 PM
which tube is it? i might have one you can have. take apic
Juice
03-11-2011, 06:52 PM
This is the one that's the worst. The only other one that is obviously on it's way out is the one that goes from the intake tube into something.

http://img.photobucket.com/albums/v624/JonesSoda/maruader/hose.jpg
Juice
03-11-2011, 06:54 PM
Also, I meant buying a set of replacement tubes for everything, since I have to assume that when one tube goes bad, the others are on their way out.
Motorhead350
03-11-2011, 07:00 PM
Wow I forgot what a clean Marauder looks like.
musclemerc
03-11-2011, 08:41 PM
Also, I meant buying a set of replacement tubes for everything, since I have to assume that when one tube goes bad, the others are on their way out.

Just so you know that hose fails primarily by the excessive heat comming from the heated pcv fitting
massacre
03-11-2011, 09:08 PM
Dave,

I sent you a PM......
Juice
03-11-2011, 09:10 PM
Just so you know that hose fails primarily by the excessive heat comming from the heated pcv fitting

Thanks for the info.

Does this hose have a specific name or anything? I'd like to be able to get one without looking like too much of a moron trying to explain what it is. :o
musclemerc
03-12-2011, 05:05 AM
I have a few of these hoses on hand Juice. If you want one let me know or you can just get a piece of 19/32 hose and cut it to fit

As I have already said the other hoses are fine that should be the only one with this issue
fastblackmerc
03-12-2011, 06:11 AM
Thanks for the info.

Does this hose have a specific name or anything? I'd like to be able to get one without looking like too much of a moron trying to explain what it is. :o

Just ask the parts guy to show you a picture, then point it out.
ImpalaSlayer
03-12-2011, 07:56 AM
ahh i thought you meant a coolant hose for the intake heater, not the pcv line
musclemerc
03-12-2011, 08:14 AM
Yeah... He needs the one like the 2 I just recently bought from you