Fuel Rails

[saxman]

I have a leaky fuel rail, wanted to replace them, but am being told by the dealer they r no longer available. I am starting performance mods, so was wondering if anyone has any ideas for replacing the fuel rails?

[MOTOWN]

i would look into a set of aeromotive fuel rails

[saxman]

I got a set of aftermarket rails, but they don't seem to fit right, not thrilled with the hold downs, but the rails don't seem to go down far enough, almost like they hit the intake too, any chance anyone has some pictures of how they look installed?

[MOTOWN]

what brand did you end up going with? pictures??

[Youngblood]

I have a cobra fuel rail off 03 04 I beleive it's the same as the marauder. It's in great shape. If your interested shoot me a pm with an offer

[Mercguy04]

Ebay...........

[Blackened300a]

Here you go...

http://cgi.ebay.com/ebaymotors/Fuel-Rail-injectors-Ford-Mustang-4-6L-GT-Mach-1-OEM-_W0QQcmdZViewItemQQhashZitem41 57dfd64cQQitemZ280647161420QQp tZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories

http://cgi.ebay.com/ebaymotors/ford-mustang-cobra-mach-1-fuel-rail-and-24-injectors-_W0QQcmdZViewItemQQhashZitem33 656c47e7QQitemZ220744927207QQp tZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories

http://cgi.ebay.com/ebaymotors/2003-2004-MUSTANG-COBRA-FACTORY-FORD-FUEL-RAILS-_W0QQcmdZViewItemQQhashZitem56 40eb6beaQQitemZ370456357866QQp tZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories

http://cgi.ebay.com/ebaymotors/99-04-COBRA-FUEL-RAIL-_W0QQcmdZViewItemQQhashZitem4a a9a8bf17QQitemZ320673988375QQp tZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories

[ImpalaSlayer]

mustang rails are not the same, look at the FRPS and the fuel inlet. not the same.

[saxman]

The brand I bought are Professional Products. Like the aeromotive, they didn't list specific rails for the MM. They looked the same in the pics, but were a little more cost effective. The cobra factory rails look like the regulator & fuel supply are on the wrong side. That's why I was kinda looking for some pics of how the aeromotive or any other aftermarket rails look installed on the engine. I was wondering if bigger injectors are taller, or if some modifications need to be done to instal these. I have the stock injectors, but am planning alot of mods, so I wanted to just keep the car drivable as I can collect parts...thanx for all the replies, hope some1 can steer me in the right direction

[FordNut]

The injectors are the same size for Cobra, Marauder. CPR makes fuel rails for the MM, but they don't fit very good. They do have the FRPS on the correct side, though.