View Full Version : The Motor Journey........
MMBLUE
03-21-2011, 05:57 PM
Well, after chasing a rough idle for quite some time. We have changed just about everything plugs, coils, egr, you name it. Last week after a compression test of all the cylinders, 1-4 ranged betweem 138#-175# and heres where the trouble begins cyl 5 had 35# cyl 6 had 58# and the 7th I thought was going to be the worst but actually had 170# but was wet with oil and not firing much. Cyl 8 was 138#.
So, I said screw it, sell it, and let somebody else put an engine in it. I listed it here and after a few PM's etc, I spoke with Zach. At first his intension was to buy it and put a motor in it. After talking with him he was more convincing me to fix it and keep it along with Musclemerc feeding me PM's of where I can score a Motor and thanks to him, I got one. I figured, heck I'll get some heads change them and my problem solved or maybe have them pulled and fixed ( yeah right ). I was looking at 2K plus just for that route and hardly anyone around here was willing to touch it.
Long story short, or short story long, whichever, I ended up getting a line on a motor and am hopefully going to be going to pick it up ( undisclosed location ) and heading a bit more north with that thing in my trunk to Zachs to put it in on Friday if all works out right.
Today, I began the first part of the Motor Journey, I cleaned out the trunk and got her detailed for the trip. In the upcoming days, I'll document the Motor Journey. Pics and stories to follow.
musclemerc
03-21-2011, 06:14 PM
Your gonna fit it in the trunk??? How much does a MM motor weigh?
IDK man, maybe consider putting a hitch on it and rent the smallest trailer you could find. Or maybe rent a small truck and put the MM on a rental trailer
Zack can surely put the new one in blind folded.
MMBLUE
03-21-2011, 06:21 PM
500 LBS or so. Kinda just like having to big guys in the back seat.
kmastl
03-21-2011, 06:26 PM
When I dropped my car off at Zack'shme mentioned someone from FL coming all the way to him. Guess that guy is you. Haha
Your definitely taking it to the right guy.:D
MMBLUE
03-21-2011, 06:32 PM
Yeah it's me. But I will be coming from MS. Uncle Sam got me temporarily located here.
When I dropped my car off at Zack'shme mentioned someone from FL coming all the way to him. Guess that guy is you. Haha
Your definitely taking it to the right guy.:D
When he replaced mine, he took my old one and put it in the trunk of his Lincoln and away he went :beer:
MMBLUE
03-21-2011, 06:40 PM
Your gonna fit it in the trunk??? How much does a MM motor weigh?
IDK man, maybe consider putting a hitch on it and rent the smallest trailer you could find. Or maybe rent a small truck and put the MM on a rental trailer
Zack can surely put the new one in blind folded.
Quote " The engine will fit. and it's not to heavy. It is possible you will need a bungee cord if it isn't positioned just right"
This quote was from a reliable source.
Disclaimer: ( All typos and opinons of other parties involved, can or will not or maybe possibly or could be those of outside sources. These opinions can an may possibly be tolorated by some, but not many and all current, future or past members this herein after or before, or maybe right now, who knows ) I'm confused, as long as you are too. hehe!!!!!!
musclemerc
03-21-2011, 06:58 PM
When I dropped my car off at Zack'shme mentioned someone from FL coming all the way to him. Guess that guy is you. Haha
Your definitely taking it to the right guy.:D
Whats the cam situation looking like?
When he replaced mine, he took my old one and put it in the trunk of his Lincoln and away he went :beer:
That answers it
MMBLUE
03-21-2011, 07:06 PM
I'm hoping that maybe Zach has an extra badgless grill laying around too..
Of course, the wife thinks I'm nuts to go to such lenghts for a, as she would put it, " Piece of metal that you just can't let go" . I seriously gave a look at all new and used cars out there. Nothing in the market place would cut it. Sorry, nothing that I could afford.
musclemerc
03-21-2011, 07:07 PM
Cheaper to keep her David. Your making the right move
musclemerc
03-21-2011, 07:09 PM
Oh and on the grill thing... :neener:
Been there done that!
kmastl
03-21-2011, 07:11 PM
Whats the cam situation looking like?
I opted to not buy the cloyes sprockets and keys. Zack says he is going to make it work. Right now I believe the heads are still at the machine shop getting freshened up.
Oh, and he has the cams I ups'd them and he got them a few days ago.
MMBLUE
03-21-2011, 07:15 PM
I opted to not buy the cloyes sprockets and keys. Zack says he is going to make it work. Right now I believe the heads are still at the machine shop getting freshened up.
Oh, and he has the cams I ups'd them and he got them a few days ago.
And while your heads are getting freshened. We might be pushing your MM out to put a motor in mine.:argue:
MMBLUE
03-21-2011, 07:17 PM
Oh and on the grill thing... :neener:
Been there done that!
Yeah ya know I'm jealous.
kmastl
03-21-2011, 07:21 PM
And while your heads are getting freshened. We might be pushing your MM out to put a motor in mine.:argue:
Not a problem at all. I am not going to be able to get it until April 3rd at the earliest.
wickedmerc
03-21-2011, 07:31 PM
... I ended up getting a line on a motor and am hopefully going to be going to pick it up ( undisclosed location ) and heading a bit more north with that thing in my trunk to Zachs to put it in on Friday if all works out right.
I'm a little confused....you're buying a "new" motor for your MM, putting it in your MM trunk and driving your MM with a bum motor and an extra 500+lbs over 1000 miles to have someone install it for you? That's extreme bro! I think you're my new hero!
I'm in the process of swapping my motor out as well....and I thought I was nuts for shipping my car 50 miles for the install.
Good luck with all of that!
MMBLUE
03-21-2011, 07:58 PM
I'm a little confused....you're buying a "new" motor for your MM, putting it in your MM trunk and driving your MM with a bum motor and an extra 500+lbs over 1000 miles to have someone install it for you? That's extreme bro! I think you're my new hero!
I'm in the process of swapping my motor out as well....and I thought I was nuts for shipping my car 50 miles for the install.
Good luck with all of that!
Actually not new but new to me. The used motor that I'm getting happens to be south indiana. The cost of shipping is about 300 or so. Being here in MS and having NOOOOOOOOOOO tools to put a motor in etc. After talking with Zach, I was sure I was going to put the motor install up to him. Fate would have it, that the motor I located was in south Indiana. Being that I don't have a lot of jingle in the pocket, Zach said " stick it in your trunk and drive up to me and I'll stick it in the car for ya" who could resist. I'm usually up for an adventure.
As for the sick lame and lazy MM that i've been driving around, It's been like this for quite a while around 10K miles or so. I make the FL to MS trip constantly 570 miles all the time. When driving the MM on the hi-way, you can't even notice that it's sick lame and lazy. It'll make it.
musclemerc
03-21-2011, 09:11 PM
Actually not new but new to me. The used motor that I'm getting happens to be south indiana. The cost of shipping is about 300 or so. Being here in MS and having NOOOOOOOOOOO tools to put a motor in etc. After talking with Zach, I was sure I was going to put the motor install up to him. Fate would have it, that the motor I located was in south Indiana. Being that I don't have a lot of jingle in the pocket, Zach said " stick it in your trunk and drive up to me and I'll stick it in the car for ya" who could resist. I'm usually up for an adventure.
As for the sick lame and lazy MM that i've been driving around, It's been like this for quite a while around 10K miles or so. I make the FL to MS trip constantly 570 miles all the time. When driving the MM on the hi-way, you can't even notice that it's sick lame and lazy. It'll make it.
If your 100% set on going this route then I'm with you. However if you want to, I know a guy with tools.... He has lots of tools ;) ... He might even break out the air tools for a friend in need.
When he replaced mine, he took my old one and put it in the trunk of his Lincoln and away he went :beer:
You like putting yo junk in other mens's trunk.....:cool:
Smalldogg/03mm
03-22-2011, 11:37 AM
You like putting yo junk in other mens's trunk.....:cool:
U really r a fun person.. Keep it up....
Spectragod
03-22-2011, 02:28 PM
you like putting yo junk in other mens's trunk.....:cool:
twss....ibtl
BigCars4Ever
03-22-2011, 05:20 PM
I talked to your wife last week and I think she understands our shared insanity. I just think wives like to bust our balls over our cars.
RacerX
03-22-2011, 05:30 PM
Picking her up April 3rd huh? Too bad it wasn't April 1st. If I was Zack, I'd say "Check this out!" Pop the hood and take a picture of your face as you looked at the 10hp Briggs and Stratton in the engine bay... :D
MMBLUE
03-23-2011, 03:23 PM
Update; Of course when your in the Military things always change. Thats the constant.
So with that being said, I've had to go to plan B. As we speak (write) the motor is getting picked up from South Indiana and heading south via truck ground carrier to Musclemerc's.
Unfortunatly, plan B doesn't include Zach. As he said, " that's okay, I'm busy as heck anyway" But, he will be indirectly involved :rolleyes: hehe.
Plan B consists of; droping the car off to Travis ( Musclemerc ) and giving him the week to knock it out. I'm sure he'll be chiming in here shortly with progress. With all the work the members here have given him buying all his Musclemerc products, I hope he'll have time to get to my engine swap and maybe a few goodies.
musclemerc
03-23-2011, 06:25 PM
I dont know how I'm gonna do it.... BUT I'M GONNA DO IT!!!!
Hope it turns out well for ya, take pics for us to ogle :beer:
musclemerc
03-24-2011, 06:24 AM
I may not have time to document the swap, but if I can make it happen I will.
BigCars4Ever
03-24-2011, 09:50 AM
Now would be the time for the shorties install and the cooling mod!
BTW how much to make sure he gets no performance mods? If his car is faster than mine I'll never hear the end of it!:neener:
musclemerc
03-24-2011, 06:16 PM
Well Ron, you know I gotta mod something for him.
I won't tell!
MMBLUE
03-26-2011, 06:26 AM
Motor arrived at Musclemercs. Now for the fun to begin.:banana2:
MMBLUE
03-29-2011, 05:40 PM
Musclemerc has already got some of it done. But he is keeping what he's doing a secret. Maybe some suprizes in store for me. He does such a great job on all the things he does. It's his attention to detail that makes his stuff stick out above the rest. I CAN'T WAIT!!
BigCars4Ever
03-29-2011, 06:26 PM
I like your new avatar! Silence is golden...Duct tape is silver!
MMBLUE
03-29-2011, 06:53 PM
I like your new avatar! Silence is golden...Duct tape is silver!
With all this censorship thats been going around here lately, I figured I would Duct tape my mouth shut so I wouldn't take a unwanted vacation.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.