3" Fuel Filter Upgrade

[musclemerc]

Sold Out!!!

$42.00 shipped for the first 10 order's

This kit is made to replace the stock 1-1/2" fuel filter with a larger 3" filter setup. It gets rid of the restrictive 90* bends that are attatched before and after the filter that kill's the fuel flow. This is a must have mod for N/A or S/C MM's running the stock non-return style fuel system.
Much like most of my mods I overbuilt this one. I double clamped the lines with the proper fuel injection clamps and used a 3 layer reinforced Good Year hose. The inside of this fuel line is a neoprene tube that is E-85, Diesel, and Vegetable Oil compliant, so their is no need to worry about the possibility of premature failure from the line. The correct 3" filter clamp will be included with the sale.

**The only thing you have to do is unbolt the stock bracket and bend it to accept the larger filter or you can order a 3" bracket from Ford PN# F57Z-9A335-A**


Here is the list:
Ctrlraven
Blackened300A
jimbok1951
Dragcity
Da Dark Jedi
TAKEDOWN
Hotrauder
MrEPooh
Guspech750

http://i790.photobucket.com/albums/yy182/musclemerc/00110.jpg


Installed:

http://i790.photobucket.com/albums/yy182/musclemerc/0033.jpg

Pic of the inside liner:
http://i790.photobucket.com/albums/yy182/musclemerc/0023.jpg

Comparison:
http://i790.photobucket.com/albums/yy182/musclemerc/0043.jpg

[stevemarauder]

What difference would it make to run just the 3" filter without modifying(hacking up the lines) just my 2 cents.Was an ase mechanic for 15 years for Ford and that doesn't look too safe just my opinion.

[ctrlraven]

And all you have to do is cut the old lines and bend bracket or get the 3" bracket? That's it?

[LANDY]

I did it to my car a year and a half ago. No problems yet

[TAKEDOWN]

I'm in... PM sent!

[musclemerc]

And all you have to do is cut the old lines and bend bracket or get the 3" bracket? That's it?

All you need to install the filter is an 8mm socket and a razor knife
I took the bracket off and bent it with a crescent wrench on my bench vise


I did it to my car a year and a half ago. No problems yet

I have run it since my FP swap. The one installed in the pic is my MM.
I have had no problems because I used the proper fuel line. This liner will not swell or breakdown from gasoline or pressure it is 100psi rated. This kit wil come with double clamps on all connectors, mine has only one clamp at the fuel filter. This is good enough for my MM, but for the member's I WILL NOT TAKE A CHANCE WITH IT. Like I said I overbuilt this kit

It's E-85 compliant, that says it all


I'm in... PM sent!

Thanks!

[burt ragio]

What difference would it make to run just the 3" filter without modifying(hacking up the lines) just my 2 cents.Was an ase mechanic for 15 years for Ford and that doesn't look too safe just my opinion.


Your taking out the rubber lines bends that have been known to starve restrict or sometimes collapse. The larger filter stores more fuel.

[musclemerc]

Here is why this mod is so great. It gets rid or the restrictive bends before and after the fuel filter. It shortens the length of time it takes to get the fuel from the tank to the fuel rail's.
Remember were running a return less style fuel system.

Here is a pic of the small 90* bends and the factory line that is prone to collapse.
http://i307.photobucket.com/albums/nn306/Marauder-Z/FuelFilterMod007.jpg?t=1227661 821

I got this pic from Zack's thread. Look at the diameter of the connectors and the high quality factory line that WILL eventually fail.

Now on to the cost.
The filter is $11.99
My fuel line $10.00 for 18"
The FI clamps $12.00 $1.50 X8
Expedited Shipping $7.00

Total: 40.99

Where is my profit?
I know, there is'nt one... But as I have said for years now, I don't do this for money. I do it for the LOVE of Marauder's

Many can attest to this fact. Check my friends list and PM anyone there. Or check out my 100% positive feedback. :burnout:

[ImpalaSlayer]

how is that unsafe? lol

looks good T, i bet that line and those clamps arnt cheap.

[ImpalaSlayer]

you just answered what i said while i was typing it hah

[gdsqdcr]

So is this a one time sale or will your vendor forum be up soon? That way we can order these from you.

Anthony

[ctrlraven]

Just ordered mine.

[Blackened300a]

Accept Paypal?

[musclemerc]

^^Gladly....

[Blackened300a]

^^Gladly....

Pass over the info and expect payment within seconds.

[Dragcity]

So Travis...... What kind of beer is you absolute favorite? Ask Zack where I am headed with this.........

[musclemerc]

When I was in Fort Lauderdale I only drank Heineken but now i'm in Mississippi, I cant get it fresh. I've tried most American brews but regular Coor's makes me the happiest

[ctrlraven]

Pass over the info and expect payment within seconds.
No Paul this mod will not make you faster than me. :P

[musclemerc]

I got you Blackened,
Thanks You guy's for the interest, at this point I need to order more parts to get everyone's kit's shipped, they will ship priority 2~3 day delivery.
Hopefully by the weeks end parts will be in hand and they will all go out ASAP.

Thanks!

[Dragcity]

Great! Lite Lagers... Those are he11 to make (well)...

[Blackened300a]

No Paul this mod will not make you faster than me. :P

We shall see about that! :P

[CobraSVT657]

Just when I thought I was done buying things to finish up the car while its on the lift....:lol:

[DOOM]

This is a great mod!

Had this done on my car about a year ago! :beer:

[justbob]

Yo T, hook me up brotha, but make mine $10.00 more...

[Da Dark Jedi]

PM sent!!!

[musclemerc]

Yo T, hook me up brotha, but make mine $10.00 more...

:eek: WOW Bob! :eek:

[musclemerc]

Only 4 left....

Get in before the LOCK!

[CobraSVT657]

Add me to the list

[Hotrauder]

Travis, sign me up. Dennis Paypal on the way again.

[TAKEDOWN]

Check sent!

[guspech750]

I'll take one if you have one left please.


PM sent.

[massacre]

Wow.
I had no idea that stock MM fuel filter is only 1 1/2"?

Weaksauce.

My '93 has 3" filter standard.
and none of the kinking, either. I am using fittings that attach in a similar fashion, except they are AN adaptor fittings. If I wasn't using AN fittings and braided hose, I would be all over this. Comes with everything, does it come with the filter, and which brand of filter?

[musclemerc]

Travis, sign me up. Dennis Paypal on the way again.

I got you Dennis! ;)


Check sent!

I got you too Takedown! ;)


Wow.
I had no idea that stock MM fuel filter is only 1 1/2"?

Weaksauce.

My '93 has 3" filter standard.
and none of the kinking, either. I am using fittings that attach in a similar fashion, except they are AN adaptor fittings. If I wasn't using AN fittings and braided hose, I would be all over this. Comes with everything, does it come with the filter, and which brand of filter?

Yeah the factory cheaped out on us with the filter setup.

Everything is included filter, double FI clamps, 3" band clamp, and 100psi E-85 compliant hose.

My competition would like the member's to think that I use AutoZone filter's but the one he showed is completely the wrong part number.
Real wrench turner's know to go straight to NAPA for parts not AutoZone.

[massacre]

Is it MoCraft?
Or WIX?

[Speed]

Send me payment addy Travis, should have it but just in case

[Drewstang]

Great mod and well worth the money, unlike some overpriced and over engineered kits out there. Thumbs up, Travis.

[TAKEDOWN]

Is your stock bracket bent in that picture or is it the 3" bracket?

[Embassy]

Add me to the list.

I'll PayPal you the funds.

[musclemerc]

Send me payment addy Travis, should have it but just in case

travisspencer@bellsouth.net


Great mod and well worth the money, unlike some overpriced and over engineered kits out there. Thumbs up, Travis.

Thank You Drew!


Is your stock bracket bent in that picture or is it the 3" bracket?

I removed and bent my bracket. 10mm socket and a bench vise, you could also use a c clamp and a piece of wood.


Add me to the list.

I'll PayPal you the funds.

Thank You Embassy!

[ctrlraven]

Travis I got mine in the mail today, thanks!

[MOTOWN]

just ordered mine tonight!....look forward to working out the kinks!

[ctrlraven]

And if Travis wasn't already enough of a good guy, he is sending me the updated fuel line hoses when he sends out my catch can. :beer:

[ImpalaSlayer]

thats cuz T is the man.

[tbone]

I will get one shortly.

[Taemian]

Any of these left? I'd like one.

[a_d_a_m]

Any of these left? I'd like one. +1, is this something that will be available further down the line?

[fastblackmerc]

+1, is this something that will be available further down the line?

Take a trip to a FLAPS and get the parts...... make your own.

[zr271cuda]

Money sent. :cool:

[MENINBLK]

Doesn't anyone manufacturer a coupler for the filter that doesn't have the 90deg bend and is straight through ???

That would make more sense to put on each of the rubber hose lines to attach to the filter.

It doesn't need to be a FORD item, it just needs to be a fuel coupler with the right ID.

[stryker]

:D MUSCLEMERC , add me to that list I will check what type of gas filter has and send you a PM.

[musclemerc]

OK I need to clear a few thing's up in reguard's to the hose supplied with the 3" kit's. I began the kit's with a Good Year 100psi hose that has a E-85 complient LINER. Please take note of the word liner, that's the blue thing in the middle of the hose. If this LINER is knicked while swapping filter's, or during the installing, THE REST OF THIS HOSE WILL FAIL.... The rest of the hose is not gasoline proof, let alone E-85 proof. I got a PM from a Member that originally had this issue and he wanted me to know "everyone may not be as adept as I am so stupid proof the kit's and go with a submersible hose". Taking his advice I did just that, I chose a Gate's 100% Submersible, E-85 compliant hose. I did this at my cost to provide a quality kit to the member's.

Some of you have sent me PM's taking issue with the "no name, low quality substitute hose".
Be asured Gate's is one of the BEST HOSE MANUFACTURER'S IN THE WORLD.

If I am wrong other's will chime in.

[MOTOWN]

i got the kit with gates hose, and i can certainly say its a "premium" fuel line,thats obvious from just handling it, i installed my kit and there was a difference in acceleration, and i change my filter every spring, the kit is a great mod!

[-Matt-]

Paypal sent to you T!!

[musclemerc]

i got the kit with gates hose, and i can certainly say its a "premium" fuel line,thats obvious from just handling it, i installed my kit and there was a difference in acceleration, and i change my filter every spring, the kit is a great mod!

I know exactly what you mean. The Gates hose feels NOTHING like a conventional rubber hose. I guess only the real car guy's can tell the diffrence

The thing about these 2 member's is'nt the fact that they complained about a free upgrad. It's the fact they both accused me of not being honest, I have not and will not attempt to decieve anyone on this site EVER. :shake:

[ctrlraven]

I don't see how you were being dishonest? You were offering what you thought at the time was the best part for the fuel mod. You found out otherwise there was something better to offer to members here and now you switched to the better lines and offered the upgrade to members that have the previous kit hoses.

I think that's just good business dealings right there.

In any business there will be a small % of customers who think you are thief in some form of manner.

[Hadamustang1]

I need one as well..

[stryker]

I need one as well.. :cool: Yeah mang I need one too the fuel filter is the smaller one !but ! i don't know know how that pay pal thing I preffer to send you a Money order, send me a PM with your address and I do the rest mang, ! SEND IT !

[Speed]

Sold Out!!!



:censor: ok when is the next run.

[musclemerc]

I will get one shortly.


Any of these left? I'd like one.


+1, is this something that will be available further down the line?


:D MUSCLEMERC , add me to that list I will check what type of gas filter has and send you a PM.


I need one as well..


:censor: ok when is the next run.

Now available.....
http://mercurymarauder.net/forums/showthread.php?t=70420

:burnout:

[-Matt-]

Travis is awesome... this filter kit is the ****

[-Matt-]

Hey travis, my ford dealer said that the part number for the bracket you listed is no longer avail.

[fastblackmerc]

Just bend the old one to fit and use an appropriate sized hose clamp to secure the filter to the bracket.

[MOTOWN]

i bent my bracket to a perfect fit, its very easy and takes all of 5-10 minutes once you remove the bracket from the frame.

[fastblackmerc]

i bent my bracket to a perfect fit, its very easy and takes all of 5-10 minutes once you remove the bracket from the frame.

I found it was easier to bend mine while it was still attached to the frame.

[MOTOWN]

I found it was easier to bend mine while it was still attached to the frame.

even better! if that works for you:banana:

[musclemerc]

^^ What they said....


Hey travis, my ford dealer said that the part number for the bracket you listed is no longer avail.

[texas1]

sorry i am kinda new to this i replaced my fuel filter myself a while back.If you don't mind a beginner asking are there noticeable benefits.

[fastblackmerc]

sorry i am kinda new to this i replaced my fuel filter myself a while back.If you don't mind a beginner asking are there noticeable benefits.

Don't think you'll see any benefit unless your running a power adder.

[musclemerc]

sorry i am kinda new to this i replaced my fuel filter myself a while back.If you don't mind a beginner asking are there noticeable benefits.

Quicker start's, and a slightly improved throttle response


Don't think you'll see any benefit unless your running a power adder.

The larger filter allong with larger fuel line's allow the gas to get from the tank to the injector's faster, would'nt you get some type of benefit N/A or F/I? :confused:

[texas1]

i called N.A.P.A how much of the gates 5/16 fuel inj hose do i need i have the 8 clamps the 3097 3"inch filter that all i need right.

[musclemerc]

My kit DOES NOT use that filter. ;)

[TAKEDOWN]

Received mine today... Thanks Travis!

[texas1]

how much is ur kit

[musclemerc]

$60.00 plus 4% paypal fees

[fastblackmerc]

The larger filter allong with larger fuel line's allow the gas to get from the tank to the injector's faster, would'nt you get some type of benefit N/A or F/I? :confused:

Do you really think so?

Has there ever been an issues with a NA Marauder running out of fuel? I'm sure the Ford engineers designed it correctly.

Now if you have a power adder you'll need all the help you can get.

[musclemerc]

Not true, my MM was running out of fuel @ WOT with all stock components.
Running lean like a mofo. I upgraded to twin SVT Focus pumps (I know, not necessary),along with my 3" filter mod and now all is well.

Dont make me get into how well Ford designed the in tank fuel line's.:rofl:
They're corrugated and inadequate at best!
I changed those too :burnout:

[ctrlraven]

Sometimes I wonder about my fuel but so far no problems. Going to do the filter mod this week hopefully when I do my oil change.

[bugsyc]

:cool: Yeah mang I need one too the fuel filter is the smaller one !but ! i don't know know how that pay pal thing I preffer to send you a Money order, send me a PM with your address and I do the rest mang, ! SEND IT !
WHO OR WHAT IS MANG????:confused::confused::c onfused:

[fastblackmerc]

who or what is mang????:confused::confused::c onfused:

mang = man

[stryker]

WHO OR WHAT IS MANG????:confused::confused::c onfused: :cool: don't get confused, Mang is like said Buddy,Dude,Pal,Amigo, Fella, so don't think i'm saying something bad, I hope to get you out the doubt mang. :wave:

[ImpalaSlayer]

Not true, my MM was running out of fuel @ WOT with all stock components.
Running lean like a mofo. I upgraded to twin SVT Focus pumps (I know, not necessary),along with my 3" filter mod and now all is well.

Dont make me get into how well Ford designed the in tank fuel line's.:rofl:
They're corrugated and inadequate at best!
I changed those too :burnout:

what T, you dont like the juice box straw for a fuel line? :lol:

[musclemerc]

I almost choked when I pulled the pump assembly.
I'm starting to think all the blown MM engines may lead to a detonation issue. Considering the sloppy design of the stock fuel components. How effective would that corrugated line be with lets say a 1/4 tank of gas.

Look at where the pump lives, no way the sock makes it to the bottom of the tank and I didnt feel a sloosh bucket when I did mine, corrugated FP lines, the 1-1/2" filter, the collapsed bends before and after the filter... How many MM owners have gone WOT with less than 1/4 tank of gas?

Ha this is getting laughable!

[ctrlraven]

Just put on my 3" fuel filter kit, didn't know I had to cut down part of the front line of the fuel line but I got enough of it off to avoid a kink.

I did get three CEL codes P0190, P0000 x2 on my first trip up the street and the car started to bog. Pulled over, pulled the codes and reset them. Car started right up and on my way back down the street I was watching my fuel % on my scan gauge and at idle it was 24% and when I was WOT it was 4%. ??????

I'll keep an eye on it while heading home and see what happens.

[MOTOWN]

Just put on my 3" fuel filter kit, didn't know I had to cut down part of the front line of the fuel line but I got enough of it off to avoid a kink.

I did get three CEL codes P0190, P0000 x2 on my first trip up the street and the car started to bog. Pulled over, pulled the codes and reset them. Car started right up and on my way back down the street I was watching my fuel % on my scan gauge and at idle it was 24% and when I was WOT it was 4%. ??????

I'll keep an eye on it while heading home and see what happens.

you dont need to cut anything, just slightly bend the front steel fuel line down to avoid any kinking, and your good to go

[musclemerc]

^^^What he said

**YOU GUYS PLEASE DO NOT CUT ANY STEEL LINES**

You were suppose to bend it over with a small boxed in wrench till it was straight. It's not a big deal but by not cutting the line you have two raised areas to put the clamp on both sides of

Install Tips are in this thread: http://www.mercurymarauder.net/forums/showthread.php?t=70420

The P0190 code is one that only SC cars get after upgrading to a bigger FP. I also get this code on startup with my twin SVT pumps. I found if you turn the key forward and wait a second then crank the car it happens less. The reason for the code is the fuel delivery is higher than the perameters in the tune. If you ever get a custom tune the tuner can up the perameters

Consider the P0190 code a badge of honor considering your N/A

[ctrlraven]

I was going off Zack's install thread since I didn't see anything for your's Travis. I'll head back to my shop tomorrow and bend the pipe.

So the codes didn't show back up and only went WOT once. I primed the fuel pump 5 times before starting the car and let it idle for about 8 mins while checking for leaks then drove it. Fuel pressure was 25-28 under 2k rpms which cruising and up to 34 underload. I guess that's better.

[musclemerc]

Do you have a bigger FP Birdman? I ask because your the only other N/A MM that has the P0190 code, now that makes 2 of us.

:banana2: :burnout: :beer:

[CBT]

I almost choked when I pulled the pump assembly.
I'm starting to think all the blown MM engines may lead to a detonation issue. Considering the sloppy design of the stock fuel components. How effective would that corrugated line be with lets say a 1/4 tank of gas. Look at where the pump lives, no way the sock makes it to the bottom of the tank and I didnt feel a sloosh bucket when I did mine, then the corrugated FP lines, the 1-1/2" filter, the collapsed bends before and after the filter... How many MM owners have gone WOT with less than 1/4 tank of gas?

Ha this is getting laughable!

I know I have. LOTS.

[ctrlraven]

Do you have a bigger FP Birdman? I ask because your the only other N/A MM that has the P0190 code, now that makes 2 of us.

:banana2: :burnout: :beer:
Negative, had a Ford GT pump but it went out a few years ago and I just put the stock back in cause I didn't have time or money to get another one. I've been planning on getting another one.

[Vostok]

What fuel filter brand/part number is used?

[musclemerc]

You can find the part number that others are using for the 3" filter here.
http://www.mercurymarauder.net/forums/showthread.php?t=70225&highlight=3%26quot%3B+fuel+fil ter

My filter IS NOT on this list. I use a totally diffrent part number

[Mercguy04]

$60.00 plus 4% paypal fees

Just to meke life easer on you I sent you a gift of $60.00
I will pay the PayPal fee of $2.04 my self so as not to trouble you with
any book keeping problems
$60.00 Item (Fuel Filter)
x 0.04 PayPay Fee
---------
$2,04 Total PayPal fee
---------
$62.04 Our tota

I hope you agree with this, If not please tell me so we can adjust accoreomtly. Thnk you.
Russell youngblood
25 Donald Street
Bloomfiled NJ 07003
973-429-2944 ANYTIME

[musclemerc]

I got the paypal Russell, your parts will ship tomorrow.

Thanks!!!

[Vostok]

You can find the part number that others are using for the 3" filter here.
http://www.mercurymarauder.net/forums/showthread.php?t=70225&highlight=3%26quot%3B+fuel+fil ter

My filter IS NOT on this list. I use a totally diffrent part number

Is your filter (not the entire hose/clamp assembly) of a higher quality than those found in that list?

Myself and several others have asked the same question throughout this thread..I don't understand the dodging.

[musclemerc]

I cannot say that it's a BETTER filter as far as the element. But here is some diffrences in my filter.

1) My filter has longer in/out necks to allow me to use a double clamp setup.
2) If you flare one of the filters listed on the thread I posted for you there will be a VERY sharp edge left that can and will cut the inside of the FI hose.

Believe me, I tested ALL variations of the 3" filter and my parts by far are a better kit that will allow you to swap filters in the future without worring about damaging the FI hose. Why do you think I went from the GoodYear hose with a liner to the Gates submersible hose that doesnt? This decision came from using the WRONG filter (those on the thread I posted).

Now if you dont plan on swapping the OEM hose, use the filters I posted but if your swapping the OEM lines then you are on your own with those filters.

I have nothing to hide from you or anyone else on the site, you asked for a part number for a 3" filter, I gave you part numbers for 3" filters. I answered your question but do you think I'm crazy? Why would I post my part numbers? That would'nt help me one bit.