View Full Version : Heres a stupid idea for the car...
Motorhead350
04-12-2011, 12:02 PM
....that I am still considering. I was thinking of putting on spray on bedliner on the lower half of the front bumper cover. The reason being I am tired of this bumper getting sc***** all the time. Also would this ever be able to be removed if I didn't like it? Finally what about the material you roll on? I highly doubt I will do this, but I saw it the other day on a truck and I didn't even notice what it was until I looked up close. It looked great.
Any info on this protective?
EDIT: the word is stupid, thanks a lot SMART phone!
gdsqdcr
04-12-2011, 12:34 PM
IF you did it, get it done by LineX or Rhino. They will have straight lines and it will last. I have seen it on the sides of trucks, ... to each their own. As for a car ... not one I cared about.
A body of mine got a 'clear bra' put on his Shelby. No chips or scratches on it still. Check that out. I dont know the cost.
Anthony
Motorhead350
04-12-2011, 12:36 PM
No bra for me thank you. I appreciate the advice though.
fastblackmerc
04-12-2011, 12:36 PM
Go with a clear bra.
www.xpel.com
Motorhead350
04-12-2011, 12:56 PM
Now that I might consider! Thank you.
ctrlraven
04-12-2011, 01:38 PM
I would do the clear bra before doing anything else.
Marauderjack
04-12-2011, 02:15 PM
The bedliner material is Polyurea and once cured is impervious to all solvents so It will not be removed easily.....sanding/grinding will leave your bumper in pretty sad shape!!:shake:
Go clear but noting will stop the scrapes you describe Dom!!:cool:
Fosters
04-12-2011, 02:54 PM
Skid plate and/or this:
http://www.fleetsafety.com/catalog/HDwrapCV.gif
:D
Skid plate and/or this:
http://www.fleetsafety.com/catalog/HDwrapCV.gif
:D
Got a part number for that!?
I want that on my Vic!
Spectragod
04-12-2011, 04:07 PM
Got a part number for that!?
I want that on my Vic!
I KNEW you were a whacker..... :P :D
Go for it, have them tint the windows with it too :beer:
03calitejas
04-13-2011, 01:03 PM
Hey Dom, mine is lowered so I had some scratches on mine too. Some were deep enough to see the yellow urethane material under the paint. I went and got a $5 black touch up paint from Autozone and it covered it nicely.
RF Overlord
04-13-2011, 01:49 PM
Dom, this may sound like blasphemy, but how about just getting a CV or GM bumper cover and saving the Marauder one? You should be able to find a decent used one at most junkyards. Since the MM covers are hard to find, if not discontinued, please don't ruin a good one with that bedliner stuff.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.