Driver window motor

[sbell]

Doing it myself ---


Does anyone know and if so, please give instructions on how to:

Swap motor without having to swap the whole motor/regulator assembly?

[fastblackmerc]

It can be done.

Remove the interior trim aka door panel.

Put the window in the full up position.

I use two 6" - 8" sections of heater hose to hold the window up. Wedge the heater hose in between the inner door skin and the window.

Disconnect the connector for the motor.

Remove the three screws that secure the motor to the regulator.

To install, just reverse the procedure.