PDA

View Full Version : New Engine



ntd
05-26-2011, 06:26 PM
Picking up my new engine this weekend:D

Modular Performance built

03 aluminum block
Cobra crank
Manley rods
ARP 2000 rod bolts
ARP main studs
ARP head studs
h13 wrist pins
Diamond pistons @ 9.8:1 comp
Total Seal rings
Mellings billet oil pump
MLS head gaskets
P&P heads
98 Cobra intake cams
PSR intake

I really wanted to do a 5.3l Boss but the money just wasn't there hopefully this engine with more boost will make a little more power:P

MOTOWN
05-26-2011, 06:31 PM
wow congrats! sounds like winner

mcgyver59
05-26-2011, 06:55 PM
Would you mind sharing the cost? I've been curious as to how much.they charge.
Also, what was the amount of time from.conception to completion.?
Thanks

LANDY
05-26-2011, 07:17 PM
Congrats man. I look foward to see that motor make some great power.

DOOM
05-26-2011, 07:39 PM
Sweet!!! :up:

sailsmen
05-26-2011, 07:54 PM
Awesome specs. :banana:

Watch your IATs when you crank that Boost up. With your set up Meth maybe the most economical way to drop the IAT.
When I went 19psi with the Water to Air we hit 240* on the IAT at the 1320, same as non-intercooled.

Switched to Air to Air and dropped it to the safety range. Added Meth for safety.

RR|Suki
05-26-2011, 08:08 PM
congrats on the new motor :burnout:

RacerX
05-26-2011, 08:08 PM
A John Tymensky build. Nice! I'm jealous! :) That is going to be a sweet machine when it's all finished.

FordNut
05-26-2011, 08:22 PM
My engine was built by John and his late son Mike. Great folks, really know their s**t. Sounds like you've got the setup to crank up the boost and make some really good power!

ImpalaSlayer
05-27-2011, 08:39 AM
awesome Nick

ntd
05-27-2011, 08:45 AM
Thanks guys I'm excited should be fun car. I think I'm only going to shoot for 15-16 psi with the 9.8:1 compression. I don't really know how much boost it will take? I'm hoping that if we are responsible with the timing running pump gas and meth it will be fine. I would really like to see 550-600 rwhp and 450-500 rwtq, but haven't really seen any similar setups :dunno:.

BODYMAN
05-27-2011, 09:01 AM
Awesome set up cant wait to see the results. Congrats

RR|Suki
05-27-2011, 09:02 AM
did you step up to the 2200 blower? I dunno if that smaller one will put 600 to the wheels with only 15-16psi

sailsmen
05-27-2011, 09:03 AM
Weird, when I click on your "My Garage" link I get my own Garage. :D

LANDY
05-27-2011, 12:01 PM
Weird, when I click on your "My Garage" link I get my own Garage. :D it happens to me too.

ImpalaSlayer
05-27-2011, 12:23 PM
Weird, when I click on your "My Garage" link I get my own Garage. :D

mine says theres still a marauder in mine :lol:

sailsmen
05-27-2011, 01:26 PM
Must be the Edit link in lieu of the page of where NTD is listed in the Garage.

ntd
05-27-2011, 05:52 PM
IDK i can still see my own if I click the link and still see the other persons garage if I click there link. Website seems a little funky since the last few days I'm missing the new post link at the top right corner

sailsmen
05-27-2011, 08:40 PM
Is your own your edit garage page or your garage page?

ntd
05-28-2011, 04:11 AM
Is your own your edit garage page or your garage page?

you right I linked my edit page :P I changed it to my view page should be good now

babbage
05-28-2011, 05:10 AM
Congrats. Sounds like very high quality build done right. Offset wrist pins? They have a good reputation! I'm jealous too.

justbob
05-28-2011, 03:16 PM
Sounds like someone is about to play!

LANDY
05-28-2011, 06:04 PM
Sounds like someone is about to play HARD! fixed it for you ;)

william s
05-29-2011, 06:09 AM
I know you will enjoy it.