Larry LJ on 24's+

[Dennis Reinhart]

Larry sent the car here last month his old motor passed away at 135 thousand miles, so it will get a new breath of life with a Vortech YSI and he is getting a Cobra Crate motor, we are going through the fuel system adding 60 lb injectors a B3000 Maf, we will inspect the transmission as well as the whole car, his paint scheme will be silver vain I think this will look good with silver. All the pipes VC and Intake will be powder coated, I left my camera at home but will be posting pictures.

[DOOM]

Another blown marauder is always a good thing! :burn: :burnout: :burnout:

:beer:

[Dennis Reinhart]

Here are his pipes and air box I am waiting on the VC and intake to come back.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1306957556-larry.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1306957581-larry1.jpg

[Loco1234]

non-intercooled?

[Dennis Reinhart]

non-intercooled?


Yes Gary it is air to air.

[Dennis Reinhart]

I spoke to Vortech today, I sold a 03 CV kit and a 03 Marauder kit going to Canada and John told me Larry's YSI is on the way he cant wait, will go a eight rib on this one.

[LJ on 24's]

That's what I am talking about.

[MOTOWN]

wow! looking forward to see this one completed

[CWright]

That car will be very fast!!:burnout::burnout: I hope you have a tire fund set aside!:D

[Dennis Reinhart]

Now Larry I over nighted you two Zanex yesterday please take both before viewing the pictures I am sorry the car fell off the lift but luckily no one was hurt.









































































GOT YA









http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548536-LARRYYSI3.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548257-LARRYYSI2.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548307-LARRYYSI1.jpg

[GAMike]

Looking forward to seeing Larry's Marauder run!:burnout:Any "guesstimates" on finished product timeframe Dennis?

[Dennis Reinhart]

Looking forward to seeing Larry's Marauder run!:burnout:Any "guesstimates" on finished product timeframe Dennis?


Mike I speak to Larry once a week, the week he brought the car here which was 30 days ago I had five other Marauders ahead of him, the car had a busted RF tire and we have dismantled the car in between the jobs we have here. His old engine is on a stand. Larry told me to take my time and thats what I like to do, to insure he gets a quality job and its built to his satisfaction. His pipes are here powder coated I am waiting on the intake valve covers and timing cover, I have decided to go a dash eigh fuel line with Aeromotive rails so we have a plan and it is in the works, this should be a very fast car when done.

[jflave]

Hey Dennis how much boost will the V7YS1 make ?:dunno: Someone going to have fun with that thing. :)

[Dennis Reinhart]

This will be my first so will have to wait and see.

[LANDY]

Hey Dennis how much boost will the V7YS1 make ?:dunno: Someone going to have fun with that thing. :) they are capable of a lot of boost.
Larry will have bad beast when is done.

[Loco1234]

The YSi does similar boost to the JT-trim I have but comes on full boost much quicker but also start to develop boost @ a higher RPM than the JT-trim. A very suggested blower for racing use...

[MOTOWN]

the vortech v7 ysi trim is capable of some serious h.p. vortech put one on a camaro that ran in the nines! this is a mean hair dryer!

[CWright]

Now Larry I over nighted you two Zanex yesterday please take both before viewing the pictures I am sorry the car fell off the lift but luckily no one was hurt.




http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548536-LARRYYSI3.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548257-LARRYYSI2.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1307548307-LARRYYSI1.jpg


Alright now LJ, Back away from that keyboard before your drool ruins it!:P

[LJ on 24's]

:drool::drool:Chris you got that right.

[cpe6]

Dennis you are so wrong for the lift joke; Had me worried and its not even my car. That was a good one!!

[LJ on 24's]

Yeah he got me too. :lol:

[Dennis Reinhart]

Yeah he got me too. :lol:


Dam Larry I am sorry it got worse today, your motor fell off the delivery truck if you talk to CPE6 he might loan you his


































































































HA HA his is on a engine stand wait till you see your VC and intake.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308092620-larrysandcpe6.jpg.jpg

Here is where I put the Bap http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308093187-baplocation.jpg.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308093303-kinslerblue.jpg.jpg

[LJ on 24's]

Looks good in the crate I know it looks even better under the hood.

[Dennis Reinhart]

So we are working on Larry's car, we are working on Doc's car we are working on a 06 monster 2V CV, and CPE6 car and I want to get Jflaves to the track, so here is some of Larrys shots I went back to silvervain powder coat I think this will look good in a silver birch. And I may be doing a 2010 Town car.

http://web.iwebcenters.com/reinhartautomotive/images/larry03c.jpg

http://web.iwebcenters.com/reinhartautomotive/images/larry03c2.jpg

http://web.iwebcenters.com/reinhartautomotive/images/larry03c4.jpg

http://web.iwebcenters.com/reinhartautomotive/images/larry03c5.jpg

http://web.iwebcenters.com/reinhartautomotive/images/larry03c3.jpg
:banana::beer:

[LJ on 24's]

O yea its looking good that electric water pump is looking good also. Can't wait to hear that YSI turn up watch out Chris and Ga Mike. O yea Ga Mike I think I can give you a couple now. :neener::rofl:

[Dennis Reinhart]

Now Larry calm down, because no one here is going to perfom mouth to mouth on you LOL.:lol:;)

[Bigdogjim]

Good stuff Ya all! That will be one wicked street machine when finished:burnout:

[CWright]

O yea its looking good that electric water pump is looking good also. Can't wait to hear that YSI turn up watch out Chris and Ga Mike. O yea Ga Mike I think I can give you a couple now. :neener::rofl:


:puke: :tongue: :P :high5: :bows: :burnout: Can't wait to see what she'll do!:beer:

[MOTOWN]

yes definetly subscribing

[Mike]

Dam Larry I am sorry it got worse today, your motor fell off the delivery truck if you talk to CPE6 he might loan you his


































































































HA HA his is on a engine stand wait till you see your VC and intake.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308092620-larrysandcpe6.jpg.jpg

Here is where I put the Bap http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308093187-baplocation.jpg.jpg


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1308093303-kinslerblue.jpg.jpg

I'm only asking because I don't know, but what is an Inertia Switch and what does it do :confused:

[FormulaMarauder]

When the car suffers a good hit, it disables the fuel pump. All MM's have it. If you give your car a good smack with a closed fist in that general area, you will pop it. I do it to my car when parked in unsecure lots, its a free fuel cut off.

[Dennis Reinhart]

Ok Larry here is the spacer and your nice new fuel rails.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1310081969-larryc5.JPG

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1310082125-larryc8.JPG

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1310082169-larryc6.JPG

[LJ on 24's]

:2thumbs::trophy1::toast::droo l::cloud9::cool5::banana2::D

[MercOut]

Looks good!! What type of paint is being used? I'd like a red/black theme myself.

[Dennis Reinhart]

Looks good!! What type of paint is being used? I'd like a red/black theme myself.



Silvervain powdercoat

[LJ on 24's]

I can't wait to see how much power she makes.

[GAMike]

Lookin good Dennis........ Larry have you taken those driving lessons I reccomended a while back???:P

Too hot to run hard in the ATL lately, but when the weather cools, we got some runners ova hea!:beer:

[LJ on 24's]

O you know it. I think i can give you one or two now lol. Yea I can't wait untill it get a lil cooler so we can have a lil fun. That YSI blower should have my IAT lower than the novi 1200. When I get my car back maybe we can pay Carolina marauders a visit. :banana2: :beer:

[CWright]

O you know it. I think i can give you one or two now lol. Yea I can't wait untill it get a lil cooler so we can have a lil fun. That YSI blower should have my IAT lower than the novi 1200. When I get my car back maybe we can pay Carolina marauders a visit. :banana2: :beer:

I'll say it again! I can't wait to see this car and your:D when you get it back. Dennis make sure you take a picture of Larry's face when you reveal his ride in person and post out here. I'm in for a trip to NC sometime in September or October. Maybe we can get a few more to head that way too! :beer:

[1stMerc]

Subscribing

[LJ on 24's]

I'll say it again! I can't wait to see this car and your:D when you get it back. Dennis make sure you take a picture of Larry's face when you reveal his ride in person and post out here. I'm in for a trip to NC sometime in September or October. Maybe we can get a few more to head that way too! :beer:




Yea we can then get fastblackmerc to do the Led upgrade.

[CWright]

Yea we can then get fastblackmerc to do the Led upgrade.

That's what I was hoping to do as well. Maybe we can head over on a Friday afternoon and come back Saturday. We will work out the details over the next few weeks.

[LJ on 24's]

That's what I was hoping to do as well. Maybe we can head over on a Friday afternoon and come back Saturday. We will work out the details over the next few weeks.

That sound like a plan to me.

[cpe6]

what makes it not streetable? I see for race use only stamped on the tag.

[cpe6]

Now Dennis thats really working your magic. Larry J I am envious in a good way.

[mcgyver59]

Cool build.
I couldn't help but notice you are using a stock single bolt tensioner timing cover. Curious as to why the better mark 8 cover wasn't used?
Is it getting a thump tensioner at least? 8 rib kit?

That ysi isn't even in its efficiency range til about 22+ psi, how much boost is this car gonna see?
I've been contemplating a centrifugal blower myself but my kids are sucking my wallet dry.

[LJ on 24's]

How much power you think the terminator is going to make with the YSI.

[GAMike]

How much power you think the terminator is going to make with the YSI.

Hopefully an amount that will have you wearing some "Depends" for the first few months on the road:eek: And no.... Not because you take long trips:D:burnout:

[LJ on 24's]

Hopefully an amount that will have you wearing some "Depends" for the first few months on the road:eek: And no.... Not because you take long trips:D:burnout:

I know right at least I have a good buddy by the name of GAMIKE that will help me clean them up.

[cpe6]

LJ give me a call; Nice job Dennis as always. #1 in my book.

[Dennis Reinhart]

LJ give me a call; Nice job Dennis as always. #1 in my book.


Your cars is coming along as well I will have pictures of it and of a 06 CV that is getting a Novi 2200 and a built motor.

[GAMike]

help me clean them up.

Can't/won't touch that..............:P

[LJ on 24's]

:snoopy: _____________________

[LJ on 24's]

Hope my car be ready by the cruise in.

[cpe6]

Thanks as long as mines is tested and tuned before the world street nationals in Orlando, FL.

[LANDY]

Thanks as long as mines is tested and tuned before the world street nationals in Orlando, FL. when is that?

[cpe6]

It was supposed to be October 27-31 but I just heard it was cancelled.

[LANDY]

It was supposed to be October 27-31 but I just heard it was cancelled. you should come to sshs11 first week of November.

[GAMike]

you should come to sshs11 first week of October

Landy,
First week of November not October........ You gonna make it this year???

[hakisaki]

is that bigger than my novi 2200

[hakisaki]

dennis what was that rear tire size i needed and why are you installing an 8 rib on this setup?

[mcgyver59]

I have to hand it to.the few guys who mentioned their cars are being worked on.
Going on 2.5 months for a motor swap and blower install?
Better you than me!

[LANDY]

Landy,
First week of November not October........ You gonna make it this year??? hah! Lol... I have had a few drinks.:P
Well I f I ever finish my never ending project on the mm and stop spending money on cheap ls1 mods.
Really I'm planning on going and running. The car should see the rollers sometime late September I'm hoping for some good numbers.

[GAMike]

hah! Lol... I have had a few drinks.:P
Well I f I ever finish my never ending project on the mm and stop spending money on cheap ls1 mods.
Really I'm planning on going and running. The car should see the rollers sometime late September I'm hoping for some good numbers.

Good deal! Plus we need someone to blow Levi's doors in:burnout:I can't do it, so its up to you, Larry or Cwright:lol:

[LJ on 24's]

Good deal! Plus we need someone to blow Levi's doors in:burnout:I can't do it, so its up to you, Larry or Cwright:lol:
Mike you know I got to represent whenever I get my baby back. :dunno:

[napolitano]

Good deal! Plus we need someone to blow Levi's doors in:burnout:I can't do it, so its up to you, Larry or Cwright:lol:

I heard that Mike.lol. Wait till this year, I have something up my sleeve. Are you going to make it up there?

[GAMike]

I heard that Mike.lol. Wait till this year, I have something up my sleeve. Are you going to make it up there?

I'll be there for sure. Don't know if i'm running tho..... Gotta get the clutch plates/rear end rehabed 1st. Plus it would be good just to sit and drink beer all day for a change:D

[GAMike]

Mike you know I got to represent whenever I get my baby back. :dunno:

Lets hope! (I woulda thought you'd be rollin by now Larry:help:)

[napolitano]

I tell you what. If I can't make ut with my car, i'll bring home a trophy driving yours for you.

[LJ on 24's]

why are you installing an 8 rib on this setup?[/QUOTE]

Because I went with the YSI with alot of boost didn't want to worry about the belt when I hammer down on her. Did you go six rib on yours.

[cpe6]

LJ they cancelled the World Street Nationals not enough cars in the lineup from what I heard. Going to Byron Dragstrip today just to watch :-(

[LJ on 24's]

LJ they cancelled the World Street Nationals not enough cars in the lineup from what I heard. Going to Byron Dragstrip today just to watch :-(

Thats a bomber I know you was looking forward to that day.:bs:

[LJ on 24's]

is that bigger than my novi 2200
Yep :banana2:

[hakisaki]

Yep :banana2:

hell yea i'll be bringing mine to atl in a month or so we should all meet up!

[LJ on 24's]

hell yea i'll be bringing mine to atl in a month or so we should all meet up!

Sounds like a plan to me.

[cpe6]

LJ went to track in Byron, IL last weekend. Easy money but I couldnt get any of it :-(. I could have got a lot of the money back that I spent on mods; not to mention that I had to forfeit the lock-up money. Cant wait to see what that YSI does.

[LJ on 24's]

LJ went to track in Byron, IL last weekend. Easy money but I couldnt get any of it :-(. I could have got a lot of the money back that I spent on mods; not to mention that I had to forfeit the lock-up money. Cant wait to see what that YSI does.

I know Cpe I hate that you loss out on the lock-up money as well as the money you could have won also hopefully I get my car back soon. I know you can't wait untill you get your car back. Are you planning on going with the YSI too.

[GAMike]

hell yea i'll be bringing mine to atl in a month or so we should all meet up!

Haki......... See if you can make your trip for the September 17th weekend. Join us for the monthly Southern Marauder Breakfast. Marauder.22 is from up your way, and if he has not shipped out to his next post by then, I think Claudio will be coming..... Maybe you can PM him & convoy down?

Check out the Southern Marauders section for whats goin on after breakfast. Hopefully Larry will have his car back by then and be ready!:burnout: Any eta from Dennis Larry????

[LJ on 24's]

Haki......... See if you can make your trip for the September 17th weekend. Join us for the monthly Southern Marauder Breakfast. Marauder.22 is from up your way, and if he has not shipped out to his next post by then, I think Claudio will be coming..... Maybe you can PM him & convoy down?

Check out the Southern Marauders section for whats goin on after breakfast. Hopefully Larry will have his car back by then and be ready!:burnout: Any eta from Dennis Larry????

Yea Mike suppose to have her ready next week. I will keep my fingers cross hoping everything goes smooth.

[Dennis Reinhart]

Larry is ready to go back together I ran out of the 8 rib idler serpintine pulleys and I am having trouble in sourcing them any one know please PM me or I am going to have them made every thing else you can buy off the shelf Larrys blower is mounted, we are also working on CPES and Shauns 06 CV I will post up pictures this week.

[cpe6]

LJ I guess Dennis is going to see how the YSI performs; In November when I sent the car I asked what does it take to make my MM run in the 10's. I went with what was suggested. You upgraded to the YSI which probably put me on the back burner to see how yours would perform. I hope it performs well :-)

[cpe6]

Dennis you may try Proline Performance or Injected Engineering. They have sites or you can contact them direct.

[Dennis Reinhart]

Dennis you may try Proline Performance or Injected Engineering. They have sites or you can contact them direct.

No your car has a JT but am waiting to see how the two will compare, and we can always upgrade.

[LJ on 24's]

LJ I guess Dennis is going to see how the YSI performs; In November when I sent the car I asked what does it take to make my MM run in the 10's. I went with what was suggested. You upgraded to the YSI which probably put me on the back burner to see how yours would perform. I hope it performs well :-)

What you mean you drop your car off in November? So you got your car back and took it to the track and couldn't break into the 10's. So you took it back to upgrade to the YSI.

[Dennis Reinhart]

No larry we are finishing his car and yours and a 06 CV I would like to see what yours will do and if it's much better we are upgrading his blower to a YSI

[hakisaki]

i can come on the 17th for sure!!! and does anybody know where i can find 2 front seat's???

[Dennis Reinhart]

dennis what was that rear tire size i needed and why are you installing an 8 rib on this setup?


Because he is running a YSI the largest S/C they make and he is running 18 PSI

[Dennis Reinhart]

Dennis you may try Proline Performance or Injected Engineering. They have sites or you can contact them direct.


Pro line just did a motor for me

[GAMike]

i can come on the 17th for sure!!! and does anybody know where i can find 2 front seat's??? Sure, in my car, but I need em:P Glad you can make the 17th. Should be a fun day!:burnout:

[cpe6]

hakisaki what color seats are you looking for? I could check the yard where I purchased my spare rims.

[cpe6]

No LJ; I havent had the car back. Dennis fixed it the first time when my buddy owned it, and sent it to a shop here where they screwed the car up. Since he did a good job the first time and I was pleased with the short turn-around why not send it back for a complete make-over. It was around Thanksgiving so I wasnt going to need the car in the winter, which seemed like the best time to have everything done; besides it freed up a parking space for me. I am waiting on its return. You can still purchase that 1996 Impala SS that I have for Sale. :-)

[GAMike]

Any updates on this belt??? Times gettin tight for SSHS10:burnout: Larry gotta get some "advance" seat time before that weekend Dennis if he hopes to control that beast down the 1/4:D


Larry is ready to go back together I ran out of the 8 rib idler serpintine pulleys and I am having trouble in sourcing them any one know please PM me or I am going to have them made every thing else you can buy off the shelf Larrys blower is mounted, we are also working on CPES and Shauns 06 CV I will post up pictures this week.

[LJ on 24's]

Any updates on this belt??? Times gettin tight for SSHS10:burnout: Larry gotta get some "advance" seat time before that weekend Dennis if he hopes to control that beast down the 1/4:D

From my understanding Mike everything is done except for the fuel system.

[GAMike]

From my understanding Mike everything is done except for the fuel system.

ETA Larry? I woulda thunk that could have been done prior to, or while finding a belt no?:confused:

[cpe6]

Havent had time to call you Dennis been busy working. I see that you will be in Seymour thats really close to me, If mines is ready you can trailer it here and I will pick it up there.

[LJ on 24's]

The beast is almost ready.

[cpe6]

I know you cant wait. How did yours get finished before mines?

[LJ on 24's]

I know you cant wait. How did yours get finished before mines?
I prob drop my car off b4 you.

[Dennis Reinhart]

I know you cant wait. How did yours get finished before mines?


Allen I am waiting to see how the YSI works if it is far better we are going to use it instead of your JT Trim I will have pictures of all the cars I wanted to do a whole photo shoot of them call me when you ca.

[GAMike]

The beast is almost ready.

This week Larry??????

[LJ on 24's]

I talked to Dennis today about the beast everything is in place. He was putting the digital gauges in when I called. He told me she should go on the dyno sometime tomorrow. Mr. Reinhart wanted to drive it around a couple of days to make sure all the bugs are out before he goes to seymour. So i should have her back by Wed or Thursday. Mr Reinhart put alot of time and effort into this build I just want to say thanks for everything.

[GAMike]

I talked to Dennis today about the beast everything is in place. He was putting the digital gauges in when I called. He told me she should go on the dyno sometime tomorrow. Mr. Reinhart wanted to drive it around a couple of days to make sure all the bugs are out before he goes to seymour. So i should have her back by Wed or Thursday. Mr Reinhart put alot of time and effort into this build I just want to say thanks for everything.

Thats good news Larry! Have any Dyno #'s yet? You gotta be psyched to get your car back this week:beer:. The weather is getting good for your practice sessions:burnout:

[LJ on 24's]

Thats good news Larry! Have any Dyno #'s yet? You gotta be psyched to get your car back this week:beer:. The weather is getting good for your practice sessions:burnout:
:banana2: Mike you know I am psyched I should have the magic numbers tomorrow. I can't wait to reunite with my baby this week it's been awhile since I played with her. :burn:

[cpe6]

Good job LJ; Have fun with her.

[LJ on 24's]

Good job LJ; Have fun with her.
Cpe you know I will. Have you heard any good news on your car yet. Maybe we can all go to the southern super heavyweight shootout together.

[bolsen]

I'm actually excited for you. should blow your socks off the first WOT you push. would you upload a video of some street runs?

[mgmsleeper]

+1 I'm waiting to hear the news. LJ hit me up I wana see her before you leave

[LANDY]

So how much powa LJ?

[LJ on 24's]

So how much powa LJ?

I am still waiting on the magic numbers. Waiting on Dennis to call me. :snare::snare:

[LJ on 24's]

+1 I'm waiting to hear the news. LJ hit me up I wana see her before you leave

Ok I will.

[CWright]

+1 I'm waiting to hear the news. LJ hit me up I wana see her before you leave


ME TOO! :up:

[cpe6]

All depends when it is; he wanted your car to be finished first from what I have gathered and if yours is a better performer than mines then he will upgrade my JTrim to the YSI that you are using. I am using brakes from Todd; what kind of brakes are you using? One thing at least ours are paid for and it was a heck of a lot of $$$$$$

[cpe6]

Your wish list will come in time; just like mines did.
I'm actually excited for you. should blow your socks off the first WOT you push. would you upload a video of some street runs?

[LJ on 24's]

All depends when it is; he wanted your car to be finished first from what I have gathered and if yours is a better performer than mines then he will upgrade my JTrim to the YSI that you are using. I am using brakes from Todd; what kind of brakes are you using? One thing at least ours are paid for and it was a heck of a lot of $$$$$$
As for as the brakes I am going with the wilwood front and rear kit I should have them in about two weeks.

[GAMike]

{channeling Landy & my best Bahston accent} We need sum Numba's........... Show Larry tha HorsePowa!!!!:D:burnout:

[bolsen]

{channeling Landy & my best Bahston accent} We need sum Numba's........... Show Larry tha HorsePowa!!!!:D:burnout:
im from boston - we say "hoss-powah"...

[bolsen]

Your wish list will come in time; just like mines did.
i flippin hope so... :)

[GAMike]

im from boston - we say "hoss-powah"...
You got it:D Me from MA as well. Been away to long I guess:burnout:

[Dennis Reinhart]

Well it is running and it looks great I am adding two bypas valves and I am going to put 500 miles on the motor change the oil then put it on the dyno, Larry has been patient as several others here have been and I appreciate that, we added new digital guages and a new rim that Larry needed replaced, Larry is also going to have the car repainted once he gets it back. CPE6 and Shauns car are in the shop now I will be posting toms of pictures of those cars as well.

[bolsen]

awesome work, sir.

[GAMike]

Calling Larry.... Calling Larry! Whats the status of your ride????? Have her home this weekend? Hope so!

[mcgyver59]

4 months +85/hour =I dont want to see that bill :eek:

[cpe6]

I dont think larry isnt worried about the labor rate at all.

[LJ on 24's]

Should have it back by the weekend DR put the stamp on it. Ready by weekend.

[LANDY]

About time... You need to get used to the power for the shootout. Consistency is the key

[LJ on 24's]

From the looks of it I might be a spectator at the shoot out
.

[bolsen]

Why?........

[GAMike]

There should be no reason why you would not have your car back by now, unless you owe Dennis$$$ and don't have it:confused:. Other then that. You should be rolling long before now in an A-1 built Marauder.:burnout:

Come on Dennis........ Get Larry done this week. Make it the only priority till finished. No parts should be on order at this point.....

Larry......You will need some over the road seat time, before taking it down the track.

[LJ on 24's]

Car made 500 rwhp @ 11# of boost @ 5800 rpm today going down to smaller pulley tomorrow.

[cpe6]

Nice numbers LJ its about time; now maybe I will reconsider selling mines. How did your car get finished before mines? DR has had it almost a year now, hmmmm.

[LJ on 24's]

[QUOTE=cpe6;1103369]Nice numbers LJ its about time; now maybe I will reconsider selling mines. How did your car get finished before mines? DR has had it almost a year now, hmmmm.[/QUOTE:cool: don't know Cpe

[Marauder_Santa]

We have a seat and parking spot reserved for you and your MM at the next Southern MM breakfast.

[LJ on 24's]

We have a seat and parking spot reserved for you and your MM at the next Southern MM breakfast.

I will be there rain sleet or snow.

[cpe6]

good job LJ, send me pics of meet...

[napolitano]

Wow. Larry, you must be a very patient man. An ideal customer for DR. Can't wait to see your ride at the shootout.

[Dennis Reinhart]

Larry will pick up Thr car up Tuesday the car had a bad injector we fixed final that and the final dyno will be Monday the car will be fine for the shoot out but it needs tires

[MOTOWN]

No pictures of this build??? been waiting on this one as im going with the same hair dryer!

[Dennis Reinhart]

Tons of pictures posting today and dyno

[MOTOWN]

Tons of pictures posting today and dyno

Cool me cants wait!:banana2:

[Dennis Reinhart]

I am having the car detailed and will post the pictures and dyno today, then I will post Allans build and Pictures and Shauns 06 CV that has a Proline Performance built motor with a Novi 2200, then I have two more here and Police car from Georgia that is getting a SC this car is state of the art with the DVDR for the camera built into the rear mirror the car is a slick top, and finally the six speed is coming along I was waiting on the fly wheel it came today and will post those as well. I have been recovering from a sever sinus infection that had me down for three weeks so I missed several days last week, but we are balls to the wall now.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501343-LARRY-007.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501374-LARRY-008.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501625-LARRY-009.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501658-LARRY-010.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501842-LARRYDS1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501889-LARRYEDS.jpg

[Dennis Reinhart]

I am having the car detailed and will post the pictures and dyno today, then I will post Allans build and Pictures and Shauns 06 CV that has a Proline Performance built motor with a Novi 2200, then I have two more here and Police car from Georgia that is getting a SC this car is state of the art with the DVDR for the camera built into the rear mirror the car is a slick top, and finally the six speed is coming along I was waiting on the fly wheel it came today and will post those as well. I have been recovering from a sever sinus infection that had me down for three weeks so I missed several days last week, but we are balls to the wall now.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501343-LARRY-007.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501374-LARRY-008.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501625-LARRY-009.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501658-LARRY-010.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501842-LARRYDS1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319501889-LARRYEDS.jpg

Well you asked here they are. I will post more tomorrow.

[71cyclone]

"MERCMOBILE" THE REAL BATCAR [ATOMIC BATTERIES TO POWER /TURBINE TO SPEED ] batman and robin quote for start up !

[JoeBoomz]

I had the pleasure of visiting Dennis at his shop last week and seeing all of these projects in the works. Thanks for your hospitality Dennis, we look forward to seeing the dyno nummies on these ones!

[BIGSHUNN]

Man! I'm loving this Bro! Great job! I know this guy is going to love his SCMM.

[MOTOWN]

Looks great! ive realy got to invest in some aeroforce gauges

[Dennis Reinhart]

Larry is here, we are checking the dyno we have several videos, Larry curbed the car ruining the front rim prior to bringing the car here so I gave him my spare to get home on and I sold him my new Dunlop SP Sports P255/55/18 for the rear, I also gave him a PHP and a Chrome alternator, so this car with very little timing is making 525 RWHP 480 RWT he is going to BABY it till it gets broken in and will lower the pulley and then twist it up, I want to thank him for his patients. I will post more pictures later today.

[bolsen]

Awesome!!!

[LANDY]

How timing and how much boost?

[Dennis Reinhart]

About 13 PSI and 12 degrees timing, as I said fellas the car has zero miles on the motor.

[Dennis Reinhart]

About 13 PSI and 12 degrees timing, as I said fellas the car has zero miles on the motor.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319586437-larry14.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319586615-larry13.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319586711-larry12.jpg

[GAMike]

About 13 PSI and 12 degrees timing, as I said fellas the car has zero miles on the motor.

Not for nuthin DR but you had how many months to get the car to where it is today? The fact that the car has the miles it has is not due to anything but time usage/mgmt..... Sorry to be blunt, but it is what it is.........:o

That said I hope Larry is happy with the work you have performed, and that your other customers on backlog, will be as pleased.:burnout:

[Dennis Reinhart]

Not for nuthin is spelled nothing DR but you had how many months to get the car to where it is today? its is at home Mike The fact that the car has the miles it has is not due to anything but time usage/mgmt..... Sorry to be blunt, but it is what it is.........:o and you are who you are.

That said I hope Larry is happy with the work you have performed, and that your other customers on backlog, will be as pleased.:burnout:

I expected nothing less from you Mike, as for Larry he can post his own thoughts with out any counciling from you, then ask him by phone or PM what I charged him LABOR consider all that, he got a great deal, forget time factor seems to me you were more concerned with that than he was. Lets see he got a 500 dollar free CHROME alternator, a free PHP spacer I gave him my own spare tire to drive home since he ruined his RF rim I sold him my brand new rear tires at cost. ENOUGH said. Any other shop would have charged 5K in labor ask him what he paid. Have a nice night Michael.

http://www.youtube.com/watch?v=wzL_6EF7pm4

[CWright]

Will Larry be able to run at Shoot out or will he need more break in time with it? That motor is going to be a beast when she breaks out!

[GAMike]

Dennis........ I was hoping we would not be having this conversation when the car came back to you..... But here we are. Why is the car there? Seems to me a blown motor....Do we really need to go there?

Counciling from me? Look Dennis, you have your ways of running your business, and those ways invite a certain scrutiny. Don't want the scrutiny? Run your business differently........ Personally given the reason why the car came back to you, I would have thought you would have made this vehicle priority A-1 and clear your decks of the bad memory... Its what most tuners would have done.

If Larry is being a gentlemen about the length of time it has taken you to get his car to this point, could it be that you "have" his car????(up till today that is).

I will freely admit, that Chris Wrights car (your build) is one of the nicest driving Marauders I have driven, that said, I am sure Larry's vehicle could have been completed in half the time it has taken. Sorry if it stings Dennis but again it is what it is...... I just hope that this build is "right as rain".

I'm not being snarky Dennis. Just straight up. Larry is a friend as is Chris. I like to see my friends get taken care of properly. I'm no worldbeater, but have run multimillion dollar business operations and sold high ticket products/solutions, so I understand a wee bit about customer service, business process and setting expectations as a component of a project. (I think we had some conversations about this some time back). I am not trying to steam roll ya, so please resist the temptation where I am concerned.

If you wanted to reply to my original post, you should have just said, "True Mike...... I have had this car longer than I expected" and left it at that.....



I expected nothing less from you Mike, as for Larry he can post his own thoughts with out any counciling from you, then ask him by phone or PM what I charged him LABOR consider all that, he got a great deal, forget time factor seems to me you were more concerned with that than he was. Lets see he got a 500 dollar free CHROME alternator, a free PHP spacer I gave him my own spare tire to drive home since he ruined his RF rim I sold him my brand new rear tires at cost. ENOUGH said. Any other shop would have charged 5K in labor ask him what he paid. Have a nice night Michael.

http://www.youtube.com/watch?v=wzL_6EF7pm4

[LANDY]

I tought the motor had some miles in it. Hopefully he can run it and get in the first timeslip page.

[hakisaki]

when dealing with performance car's no matter what it's time consuming and stuff alway's will pop up so guy's give him a break!!! my friend has had a car in memphis at dynospeed for 6 month's and he know's it will be longer than that!!! you have to pay to play and also have the time to wait on good work...the car look's great!!

[Dennis Reinhart]

Will Larry be able to run at Shoot out or will he need more break in time with it? That motor is going to be a beast when she breaks out!


He has a conservative street and Race gas but the car needs dialed in had I had two more days that would have been done, thanks for the post Chris.

[Dennis Reinhart]

when dealing with performance car's no matter what it's time consuming and stuff alway's will pop up so guy's give him a break!!! my friend has had a car in memphis at dynospeed for 6 month's and he know's it will be longer than that!!! you have to pay to play and also have the time to wait on good work...the car look's great!!


Thank you Hacki,

[Dennis Reinhart]

You made your point Mike lets move on.

[LANDY]

He has a conservative street and Race gas but the car needs dialed in had I had two more days that would have been done, thanks for the post Chris.
Nothing some dataloging and tweeking can't fix.

[GAMike]

Fair enough Dennis

You made your point Mike lets move on.

[Dennis Reinhart]

Nothing some dataloging and tweaking can't fix.


Exactly Landy, and how many SCT dealers do you know will take the time to remote access your computer and add software and show you how to use it for FREE. On a Sunday or at ten O'Clock at night.

[mcgyver59]

Everything that was installed on this car should have taken 3-4 weeks tops and thete is absolutely no reason a new engine needs to be broken in to do a balls to the wall dyno.
YSI at 13 psi? What a joke!

[bolsen]

Lotta hate in here. Too much for my blood.

[MOTOWN]

Lotta hate in here. Too much for my blood.

+1000:cool:

[Dennis Reinhart]

Lotta hate in here. Too much for my blood.

There really is not, there are always a few that try and spin the bottle and you just ignore them. They will go away. Look at all the positive remarks and support.

[Dennis Reinhart]

Everything that was installed on this car should have taken 3-4 weeks tops and thete is absolutely no reason a new engine needs to be broken in to do a balls to the wall dyno.
YSI at 13 psi? What a joke!


The car will get a smaller pulley its making about 14 PSI, and 539 RWHP on a very consevative tune till the motor is broke in. And you open your own shop and kick them out in 3 weeks, no more comments like this are needed here, and will not be condoned.

[performancenut]

Everything that was installed on this car should have taken 3-4 weeks tops and thete is absolutely no reason a new engine needs to be broken in to do a balls to the wall dyno.
YSI at 13 psi? What a joke!

I generally don't comment but roam quite often; this type of statement leaves me speechless and very glad that Dennis can ignore this sort of thing; perhaps this author would like to drop 15-20K in a build and immediately do a BTTW dyno?:confused:

I'll stick with the DR recommendations; suggest you ease-up on these types of statements and I'm done interacting with you too.

Thanks for the great multiple services that you provide Dennis, and the balls to stay active on the forum despite these types of rude comments that occasionally present.

Regards

[fastblackmerc]

Everything that was installed on this car should have taken 3-4 weeks tops and thete is absolutely no reason a new engine needs to be broken in to do a balls to the wall dyno.
YSI at 13 psi? What a joke!

Have you ever done ANY work on a car?

[bolsen]

Have you ever done ANY work on a car?
Probably not...

There is reason DR is so well respected and nobody has ever heard of this "other" guy.

[Dennis Reinhart]

Please thanks for the support, lets drop this right here, he made a statement he can do that, now lets move on, all this will do is detract from a good project full of good pictures and it helps the club see how things are installed. I will post up the CV today.

[Baconbit]

Hey Dennis quick question off topic...any holiday deals in the near future for the Xcal3?

[Dennis Reinhart]

I adhere to map pricing 379.95 FREE shipping and free updates

[Dennis Reinhart]

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319656163-LarryBaseRun.jpg

[JoeBoomz]

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1319656163-LarryBaseRun.jpg

That's the stuff dreams are made of!

It shows 15.45 PSI boost though, not 12?
With a smaller pulley and tune will Larry's car push the 650 mark???

[Dennis Reinhart]

It will make a easy 600 for sure Joe, as I said its safe for now I had the cursor in the wrong spot that is why I was off on the boost Larry was watching this run. The AF was perfect

[Dennis Reinhart]

Larry will be installing a smaller pulley and a 10% OD crank and Martins techs will will retune it saving him the long drive back here, I have now changed to a new CPR fuel rail, once Larry's car is broke in and retuned the car will be awsome.

For those that don't know Hacki was T Bonned on his way to the shoot out his beautifull truck was totaled and he was hosptilized, but is out today and doing well.