rpm gauge cluster lights

[Mike827]

Tonight on my way home from work the right half of my rpm gauge light went out...do anybody out there in marauder land know if this is a DIY repair or a dealership repair. How hard is it to get to. And also the hot/cold max ac norm.ac lights or out. Can someone please explain how to repair these problems. Would like to repair using led or smd lights.

[MOTOWN]

this is a repair that can be done if you have basic hand tools, the dash cluster has to be removed to access the lights in the rear of the cluster, you can use led, or what ever type/color you choose, the same goes for the ac lights remove and relace as needed, just remove screws at top of cluster, the silver bezel is retained by clips so you will pull it to remove it, which will give you access to the rest of the screws/bolts holding the cluster in place, its fairly easy once you remove the bezel you will get an idea of what has to be done.

hope this helps bud

[fastblackmerc]

The bulb in the dash cluster is easy to replace once you get the cluster out. I'd recommend replacing all the bulbs at once since more will be their way out.

The bulb inside the EATC can be replaced but it has to be soldered in.

[Mike827]

Thanks guys. Fastblackmerc, how much you charge to repair my eatc module?

[fastblackmerc]

Thanks guys. Fastblackmerc, how much you charge to repair my eatc module?

Just the lights?