PDA

View Full Version : Awesome Member SID210SA !!!


D Rock
06-30-2011, 04:59 PM
I contacted Mike a few days ago in search of locating a rare "Wes" Marauder gas door bibb, I had one but somebody stole it :mad::gunfire:boy was I pissed. Any way Mike offered me his spare at no charge and shipped it to my home in 3 days. Nuff said, Mike I thank you a million times.:D
screamn
06-30-2011, 05:14 PM
Make sure you fill out the "trader" post for this member & put the above positive comments in it. ;)

Again, excellent forum & members always willing to assist! :banana:

MM.net is a place for vast knowledge & a life saver.
justbob
07-01-2011, 04:31 AM
LOL How many years now have I called him Sean? My bad.. MIKE IS a great guy indeed. We've swapped many an info between us. Glad to hear he could help ya!
SID210SA
07-01-2011, 04:59 AM
No problem and thanks for the public thank you.....I had an extra one lying around.

Make sure you get a locking gas cap to keep this one safe.

I put my original one on my Suburban so I always have a piece of the Marauder with me no matter what I drive!!

If I have the means, I will always give back to the community that has given me so much insite, like the mm.net raffles that I have participated in and donated to, my EATC O ring service that I learned here and helped out other members with and many products that I have purchased over the years thru this site and its members.

Thanks for the compliments!!

Thanks to MM.net for being here!!

Mike
JBeezy
07-01-2011, 05:08 AM
Nice! I have one of these but not sure how to properly install it.
LilCop2002
07-01-2011, 03:19 PM
I've said it before and I will say it again. Mike is freaking awesome and I would do just about anything for him.
slickster
07-01-2011, 03:44 PM
what is this bibb yous speak of
D Rock
07-02-2011, 04:43 PM
25308

25309

25310
JBeezy
07-03-2011, 10:19 AM
Nice. What's the proper way to install it? I'm sure if I put in some effort I'd figure it out though
D Rock
07-03-2011, 11:42 AM
Take the gas cap and bolt out that holds the strand to the gas cap. Slip gas bibb around gas neck. Mark where the bolt lines up to its hole, take it off so you can make small opening for bolt, put the bibb back around gas neck then reinstall bolt and gas cap. Do not tighten very much or you can go through the rubber on the bibb.
screamn
07-04-2011, 03:24 AM
The bib looks good & added safety for any slight spills.

I wish I got 1 before Innovative Interceptors disappeared but a locking gas cap was first on my list since 2004 don't have the locking gas door.