Log in

View Full Version : Advice ...


yryr999
07-14-2011, 07:11 AM
Hi .. today my friend ask me about borla for marauder .. cause he hear it on Jeep SRT8 and mustang ...

so any advice .. does any one try borla before ??

thanks
screamn
07-14-2011, 07:44 AM
Slightly expensive but there is a million mile warranty, no drone, & mild tone till u hammer the pedal to the floor.

Ask me how I know.....cause I went with them instead of Flowmaster.

I had Flowmaster 40s on my p71 & the drone between 50-65 MPH was killing me.
Cobra25
07-14-2011, 09:07 AM
Alot of guys use the MagnaFlow mufflers or Flowmaster muffles. I had MagnaFlows on mine in the past & switched to Flowmaster Delta50' series mufflers. It's a matter what your looking for as far as sound & what mods you have done too your car. Their are alot of thread's here on mufflers ,do a little research & take your time.
yryr999
07-14-2011, 12:28 PM
i see .. can any body please but some clip for borla ,,,
LANDY
07-14-2011, 12:33 PM
Brian (FordNut) has borlas on his car, I also heard them in another MM and they sound and flow really good.
yryr999
07-14-2011, 01:46 PM
thank u man ...
FordNut
07-14-2011, 03:33 PM
I'm very happy with my Borlas.
yryr999
07-14-2011, 05:51 PM
I'm very happy with my Borlas.

can u please give a clips for me .. idle and driving
please and the other parts ..
WX4ME
07-15-2011, 10:43 AM
i really recommend borla pro xs, part number was 40358 (with custom x pipe from here), it's sound really good.
i'm from Saudi Arabia and i shipped them from US, i really advise you to install them in your MM.

you won't regret on that choice
FordNut
07-15-2011, 04:51 PM
Mine are the turbo xl. The long ones are quieter than the short ones, xl vs xs is 18" vs 14" I believe.
yryr999
07-15-2011, 06:58 PM
can I have some sound clips .. please
FordNut
07-15-2011, 07:00 PM
I do not have any sound clips, sorry.
yryr999
07-15-2011, 07:01 PM
ok .. if can make some please .. and tell me about the pipe and sizes and is x or h pipe
FordNut
07-15-2011, 07:36 PM
I have a custom kit, it is a Bassani X pipe. All of the inlet pipes to the mufflers are 2-1/2", the outlet pipes going over the axles to the tips are stock.

Maybe somebody can make a clip tomorrow and post it. I can't do movies and sound, as I have a slow internet connection: dialup!