will it works on MM

[ta3mo3]

found this on the web

http://www.lysholm.us/cobra_03-04.php

[RacerX]

Yes. You did see the price and other notes though, right? You may as well get the Trilogy kit and not have to worry about it.

[SC Cheesehead]

Looks like it would, but you'll still need to round up all the associated parts to install it on a Marauder (lower intake manifold, intercooler, intercooler pump, heat exchanger, coolant reservoir, upgraded fuel injectors and fuel pump, alternator and tensioner brackets, lower drive pulley and adapter hub, etc.). Add to that some fabricated stuff needed that can't be purchased (heat exchanger and coolant reservoir mounting brackets, etc.), and the need for an experienced tuner to get the car running properly after the install.

IMO, for the price indicated for the blower plus the cost for the above parts, you'd be much better off going with a Trilogy; probably cheaper in the long run.

The Trilogy is proven system for the Marauder, and is truly a bolt on, plus it comes with a canned tune that will allow you to drive the car after the installation without fear of blowing it up.

[Spectragod]

That would be a nice "upgrade" for those of us that already have a T.S., I see a winter project coming.........

[SpartaPerformance]

Yes it will fit and I found it for $4,300 but you will need injectors, inlet, and all the other stuff in the "other notes" section bringing you to the $6,000 price and beyond. It also is not smog legal and it's a 3.3L and with 4.25" pulley it produces 19 psi which will grenade your motor rather quickly.

[ta3mo3]

i though that would be better coz its twin secrw

[Black&Gifted]

Its basically a whipple.

EDIT: And it is basically the whipple 3.4L blower for the terminators. If you want a 3.4L blower, buy that. It is $1,000 less.

[ImpalaSlayer]

for a lifetime suppy of gas ill come over and install it :D



c'mon, thats like 5 bucks for you

[hotford]

I have a trilogy now and I will be upping the ainty this winter with a fresh 5.3 and looking to upgrade the blower combo either with a 2.3 wipple or 2.9.
Just figuring out the details now.

[DOOM]

looking to upgrade the blower combo either with a 2.3 wipple or 2.9.
Just figuring out the details now.

2.9??? I thought whipples went from 2.3 to 3.4? Never heard of a 2.9! Will that fit under the stock hood like the 2.3

[SC Cheesehead]

2.9??? I thought whipples went from 2.3 to 3.4? Never heard of a 2.9! Will that fit under the stock hood like the 2.3


(3.4 + 2.3)/2 = 2.9

Take the bottom half of a 3.4 and add the top half of a 2.3 and voila!

(You gotta starting thinking outside the box, Doomie...)

[BODYMAN]

2.9??? I thought whipples went from 2.3 to 3.4? Never heard of a 2.9! Will that fit under the stock hood like the 2.3

Ah yes the newest addition to the Whipple family. Been out for a little while now. As for hood clearance I would have to say no considering my 2.3 Whipple BARELY fits under the stock hood. Zack just got one of these and installed it & a TH400 on his Termi all he said to me was this thing is sick!!

[DOOM]

As for hood clearance I would have to say no considering my 2.3 Whipple BARELY fits under the stock hood.

Please as best as you can fully explain "BARELY FITS"???
Thats what she said.

[BODYMAN]

found this on the web

http://www.lysholm.us/cobra_03-04.php

In side by side comparision to the 3.4 Whipple I beleive it was apples to apples. Like others noted still need all the 03-04 Cobra hardware (approx 2000.00-2500.00) to make it fit and besides you will also need a cowl hood as that size TS will not clear OE hood

[BODYMAN]

Please as best as you can fully explain "BARELY FITS"???
Thats what she said.

OK Doomie it fits and with a hood insulator I have a portion cut out for the pulley to clear also my insulator is pressing on top of Whipple case I could remove insulator it would help and probably will cause I beleive it is incasing more heat on top of the blower. So in short it fits but no doubt it is the largest Blower you can fit OE MM hood. Make sense.

[mcgyver59]

The vortech lysholm in the link wont even come close to clearing the wiper cowl. It would go.back so far that even if you hacked up the.cowl, it would hit.the wiper motor arm.

[BODYMAN]

The vortech lysholm in the link wont even come close to clearing the wiper cowl. It would go.back so far that even if you hacked up the.cowl, it would hit.the wiper motor arm.

I would have to agree with ya that inlet appears to bubble up at back not like a 3.4 Crusher. the crusher goes back about that far but doesnt have the rise in inlet. I know a 3.4 crusher works for fact that what Zack has on his but yes the vortech just looks to high at the rear.

[hotford]

2.9??? I thought whipples went from 2.3 to 3.4? Never heard of a 2.9! Will that fit under the stock hood like the 2.3
Yes 2.9 been out f or a while,My bro has a K/B 2.4 on his 4V and I'm installing the 2.9 on it this fall,so I will have a good look and see what it will take to get it done on the MM............