View Full Version : Lowered Marauder Picture Thread...
JBeezy
07-21-2011, 07:25 AM
I'm a big fan of lowered cars, and would love to start a thread of lowered MM with pics. So far as I've been a member here I've seen a lot of interest and questions about lowering our cars.
As the title says. Post pics of your lowered MM. Please include details on what was done in the process and what was used as far as stock or aftermarket springs/shocks/spindles/ and etc....
Also, it would be a good idea to note what you had to do to get the alignment back to specs and results.
Thanks,
JBeezy :banana2:
P.S. I plan on finishing lowering mine today, and hopefully get it aligned tomorrow, and will post my pics ASAP
DETAILS PLEASE!!!!!
Blackened300a
07-21-2011, 07:27 AM
Paul (Krytin) will probably have the lowest of them all. Im sure he'll post up later on.
LANDY
07-21-2011, 07:42 AM
It's in my signature...
Egon Spengler
07-21-2011, 08:27 AM
ya diiiiiiiig?
http://www.mercurymarauder.net/gallery/data/3/Marauderhydros.jpg
http://www.mercurymarauder.net/gallery/data/3/Marauderlowtint.jpg
Embassy
07-22-2011, 06:30 AM
http://www.supermotors.net/getfile/659914/fullsize/2729542835_a4d67f71fc_b.jpg
http://www.supermotors.net/getfile/677555/fullsize/embassymaurader060r.jpg
http://www.supermotors.net/getfile/677559/fullsize/embassymaurader-commons.jpg
http://www.supermotors.net/getfile/793590/fullsize/front.jpg
Krytin
07-22-2011, 08:26 AM
I need to take some new pictures but here's one.
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_0519.JPG
2,4shofast
07-22-2011, 11:50 AM
A couple of mine...
http://img.photobucket.com/albums/v259/shofast/MM/5.jpg
http://img.photobucket.com/albums/v259/shofast/MM/02.jpg
jus4kix03MM
07-22-2011, 12:02 PM
I need to take some new pictures but here's one.
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_0519.JPG
Car looks great. What kind of tires are those?
JBeezy
07-22-2011, 01:45 PM
I'm so jealous. Cars looking so good lowered
ImpalaSlayer
07-22-2011, 01:58 PM
http://i2.photobucket.com/albums/y47/blaster250cr/IMG_1249.jpg
1 coil cut in the front, didnt touch the rear.
JoeBoomz
07-22-2011, 02:15 PM
I would do this but I have problems parking in many stalls with my front intercooler as it is. As soon as there is any sort of curb at the front of the stall it's game over and if I'm not careful, the intercooler would ram right into it.
Big House
07-23-2011, 07:00 PM
Here are a few pics of my lower sitting Marauder. Get Low!!!
http://www.mercurymarauder.net/gallery/data/500/medium/Getting_Low_1.jpg
http://www.mercurymarauder.net/gallery/data/500/medium/Getting_low_2.jpg
rayjay
07-24-2011, 07:58 PM
I like the looks of these cars. How have the dampers held up? My OEMs did not last after a conservatly lowered my ZX3 for better handling. I went to Eibach Prodampers , but they didn't last either.
Gre8one7
07-25-2011, 05:43 PM
i have wanted to lower my marauder for 5 years now...but the procharger intercooler piping just sits way to low on the passenger side.
justbob
07-27-2011, 08:20 PM
Sent from my Ally using Tapatalk
Krytin
07-28-2011, 07:06 AM
Car looks great. What kind of tires are those?
They are no longer on the car - worn out!
Made by Nitto for Discount Tire when the '05 Mustangs came out. Only in 255/45-18. They did not sell well and are no longer being offered.
They did handle very well on dry and moderately wet roads. Heavy rain was iffy - if you hit a deep puddle you better be going straight!
jus4kix03MM
07-28-2011, 11:56 AM
Heres how mine looked with 20s
http://i37.photobucket.com/albums/e61/jus4kix79/mara-stangs/IMG_0328.jpg
and on stock wheels
http://i37.photobucket.com/albums/e61/jus4kix79/DSC_0490.jpg
BIGSHUNN
07-28-2011, 01:05 PM
Heres how mine looked with 20s
http://i37.photobucket.com/albums/e61/jus4kix79/mara-stangs/IMG_0328.jpg
and on stock wheels
http://i37.photobucket.com/albums/e61/jus4kix79/DSC_0490.jpg
Sweet! Bro!:up:
2,4shofast
07-28-2011, 02:18 PM
I love the foose wheels on your MM, do you still have them?
jus4kix03MM
07-28-2011, 09:00 PM
I love the foose wheels on your MM, do you still have them?
Yes sir. I was thinking of either getting them painted or powder coated gloss black. Unless I can get some 20" 7 spoke saleen wheels.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.