View Full Version : Torque?
loud2004marquis
08-24-2011, 09:28 PM
Are there any options to get more torque for us that are N/A?
dohc324ci
08-24-2011, 09:33 PM
Cams, Cubic inches (stroker/boss block), NOS and SC.
SC Cheesehead
08-25-2011, 04:28 AM
Cams, Cubic inches (stroker/boss block), NOS and SC.
Yep, if you're gonna stay NA, the first two are your options; maybe get a bit more with the right header set up and a tune.
Roots blower is the easiest way to get the low end torque up there.
na svt
08-25-2011, 06:49 PM
The only way to increase tq of a stock long is:
-advance the intake cams to a 106 lobe center
-install 96-98 cobra intake cams and install them at 106
-Long tubes
Headers baby!!! :banana2:
jstevens
08-26-2011, 03:20 AM
you could always do a billygman and go with 4:56's
Haggis
08-26-2011, 03:24 AM
Take some air out of your tires.
LANDY
08-26-2011, 05:13 AM
You want torque Out of this little 281ci? Spray it!
BODYMAN
08-26-2011, 06:58 AM
Just put a Whipple on it and be done:beatnik: Seriously though what NA said 98 Cobra cams degreed and headers..
ROCOB
08-26-2011, 07:40 AM
Here is a fine example of torque. :D
1 Bad Merc
08-26-2011, 08:09 AM
Change your torque convertor on the trans -go to a higher stall.
ROCOB
08-26-2011, 08:24 AM
Are there any options to get more torque for us that are N/A?
There have been a lot of good answers to increase torque. you have done a gear swap for torque multiplication, a good start. I would imagine that the rest is left up to your budget. Cams, headers, and spray would be quite impressive with your gears.
post # 20 in this thread speaks of the merits of nitrous.
http://www.mercurymarauder.net/forums/showthread.php?p=1075804#post1 075804
kmastl
08-26-2011, 10:01 AM
I have lth's, 98 cobra cams, and 4.10's and a couple other mods for my na marauder.
I still am lacking the torque that I really want. Eaton swap should have been my first mod.
fastblackmerc
08-26-2011, 10:52 AM
I have lth's, 98 cobra cams, and 4.10's and a couple other mods for my na marauder.
I still am lacking the torque that I really want. Eaton swap should have been my first mod.
Eaton swap should have been my first mod
You hit the nail on the head!
Ktorres1
08-26-2011, 11:01 AM
this site is never wrong. recently after driving a challenger rt i was left wondering the same thing neverming the gt500 i also recently drove.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.