fastblackmerc
08-25-2011, 11:25 AM
Just passing along the information.
If anyone is interested:
4" Marauder Tips and new run of 3.50" Tips
I’ve received several requests regarding 4” outlet Marauder tips. We haven’t run them in many years but are considering it if we can get enough pre-orders.
Specs: These 4” tips will be identical to the 4” tips that we ran once about four years ago. There were/are some differences compared to the OE/Megs 3.50” outlet tips:
3.50” Tip (ST627)
304 stainless steel, bright polish with Megs logo. 2.25” (ST627) or 2.50” inlet (ST627-250), 26” long, 3.50” outlet with rolled edge at a 27 degree angle. No resonator. Retail price $100 per tip. Shipping cost, UPS Ground Continental US, $20 per pair. International orders (normal range $60-$120 depending on location).
4.00” Tip (ST640)
304 stainless steel, bright polish with Megs logo. 2.50” inlet only, 26” long, 4.00” outlet with rolled edge at a 15 degree angle. No resonator. Retail price $120 per tip. Approximate shipping cost, UPS Ground Continental US, $30 per pair. International cost to be determined, but anticipated packaging will be 18 pounds per set, in a 32” x 8” x 8” box.
Terms & Conditions: We would need committed pre-paid orders for at least 20 sets (40 tips), before we could begin production. We take your order and credit card information; however no charges are processed until the minimum production quantity is reached. At that time your credit card would be charged as the order goes into production.
Incentives:
On the 3.50” we have offered pre-production specials with a 10% discount and free shipping as an incentive to place a fully prepaid order in advance. Orders from stock after production were at full price.
With the 4” we will not be discounting the price as there won’t be any additional stock built beyond pre-orders. We will offer free UPS Ground shipping for continental US customers and a $30 credit for all other shipping.
Timing:
It all depends on how long it takes to get enough orders for 20 sets. The earliest start of production would be early November and latest would be to ship prior to Mid-December. If we have not received enough orders by 11/1 then the program would be cancelled. No charges will be made to customers until after the decision has been made to go forward with production.
Order Placement: Please send Cone Engineering at: sales@coneeng.com. Please include name and shipping info, quantity and a telephone contact number. DO NOT INCLUDE CREDIT CARD INFO. We will give you a call at a later date to get that information. You will receive via email a confirming sales order as verification that we received your order. If you don’t get the Sales Order confirmation within a few days then please contact us.
If anyone is interested:
4" Marauder Tips and new run of 3.50" Tips
I’ve received several requests regarding 4” outlet Marauder tips. We haven’t run them in many years but are considering it if we can get enough pre-orders.
Specs: These 4” tips will be identical to the 4” tips that we ran once about four years ago. There were/are some differences compared to the OE/Megs 3.50” outlet tips:
3.50” Tip (ST627)
304 stainless steel, bright polish with Megs logo. 2.25” (ST627) or 2.50” inlet (ST627-250), 26” long, 3.50” outlet with rolled edge at a 27 degree angle. No resonator. Retail price $100 per tip. Shipping cost, UPS Ground Continental US, $20 per pair. International orders (normal range $60-$120 depending on location).
4.00” Tip (ST640)
304 stainless steel, bright polish with Megs logo. 2.50” inlet only, 26” long, 4.00” outlet with rolled edge at a 15 degree angle. No resonator. Retail price $120 per tip. Approximate shipping cost, UPS Ground Continental US, $30 per pair. International cost to be determined, but anticipated packaging will be 18 pounds per set, in a 32” x 8” x 8” box.
Terms & Conditions: We would need committed pre-paid orders for at least 20 sets (40 tips), before we could begin production. We take your order and credit card information; however no charges are processed until the minimum production quantity is reached. At that time your credit card would be charged as the order goes into production.
Incentives:
On the 3.50” we have offered pre-production specials with a 10% discount and free shipping as an incentive to place a fully prepaid order in advance. Orders from stock after production were at full price.
With the 4” we will not be discounting the price as there won’t be any additional stock built beyond pre-orders. We will offer free UPS Ground shipping for continental US customers and a $30 credit for all other shipping.
Timing:
It all depends on how long it takes to get enough orders for 20 sets. The earliest start of production would be early November and latest would be to ship prior to Mid-December. If we have not received enough orders by 11/1 then the program would be cancelled. No charges will be made to customers until after the decision has been made to go forward with production.
Order Placement: Please send Cone Engineering at: sales@coneeng.com. Please include name and shipping info, quantity and a telephone contact number. DO NOT INCLUDE CREDIT CARD INFO. We will give you a call at a later date to get that information. You will receive via email a confirming sales order as verification that we received your order. If you don’t get the Sales Order confirmation within a few days then please contact us.