Stage 5 eaton??

[mgmsleeper]

is there a such thing as a Stage 5 port job on an Eaton?
if so will it still work for the swap to my car?

[DOOM]

Be careful with that stock motor son!

[BODYMAN]

Yes & yes All that is ,is the inside of the blower is ported I know steigemeir calls his biggest port job a stage 5 not sure how posi classifieds his. If you can get a ported Eaton for good price do it, It is simply a upgrade from a stock Eaton and man them ported sound awesome alot more whine. Another note you get that stuff from Zack?

[BODYMAN]

Be careful with that stock motor son!

What Doom said! you may need a bigger pulley cause a good port job will make more boost with same size pulley as a stock!

[mgmsleeper]

Be careful with that stock motor son!

i will, i plan on keeping it at safe numbers until i can get a built motor. is that stage 5 just way too much to use? its 126 on it now is it too much to boost? if not then whats a safe range to keep her in? car was very well maintained. i am the second owner. he said he has always used Royal purple in it and oil changed on or before due.

[mgmsleeper]

Yes & yes All that is ,is the inside of the blower is ported I know steigemeir calls his biggest port job a stage 5 not sure how posi classifieds his. If you can get a ported Eaton for good price do it, It is simply a upgrade from a stock Eaton and man them ported sound awesome alot more whine. Another note you get that stuff from Zack?

yes this ported one is a great price. i havent got the stuff from zack

[DOOM]

Just get a GOOD TUNE and keep the boost reasonable and you will be fine.

440 - 460RWHP is where I would stay at.

[BODYMAN]

yes this ported one is a great price. i havent got the stuff from zack

Those were good prices on his stuff Personally I wouldnt pass on them! Ive seen several guys boost there car at over a 100,xxx Truly I think it's fine if vehicle was well taken care, As for boost just wouldnt push it over aprox 11-12 lbs. Actually with stock size pulley it should be fine.

[mgmsleeper]

Just get a GOOD TUNE and keep the boost reasonable and you will be fine.

440 - 460RWHP is where I would stay at.

oh those number sound GREAT to me i was expecting 400-420. i plan on letting DR tune it he is local to me

[SC Cheesehead]

oh those number sound GREAT to me i was expecting 400-420. i plan on letting DR tune it he is local to me

With a Stage 5 Eaton, you'll beat that.

[mgmsleeper]

Those were good prices on his stuff Personally I wouldnt pass on them! Ive seen several guys boost there car at over a 100,xxx Truly I think it's fine if vehicle was well taken care, As for boost just wouldnt push it over aprox 11-12 lbs. Actually with stock size pulley it should be fine.

not to :flamer: but someone seen his post and beat his price

[DOOM]

oh those number sound GREAT to me i was expecting 400-420. i plan on letting DR tune it he is local to me

You'll be fine then. :up:

[mgmsleeper]

With a Stage 5 Eaton, you'll beat that.

that stage 5 will push me to a built motor.

[mgmsleeper]

You'll be fine then. :up:

thanks doom.
:beer:

[SC Cheesehead]

that stage 5 will push me to a built motor.

built motor = more $

better budget another $4,000 or so for that.

[mgmsleeper]

built motor = more $

better budget another $4,000 or so for that.

that i do know. im talking for future goals, down the line. i plan on taking care of the one i have now

[guspech750]

Yummy!! Ported Eaton. I am thinking about having my spare Eaton ported. Just have not made up my mind.


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!

[dohc324ci]

I would do a Posi Port vs a Steggy. Oh and stay away from Steggy's stage 5 port; the torque plate has been known to crack.

[mgmsleeper]

Yummy!! Ported Eaton. I am thinking about having my spare Eaton ported. Just have not made up my mind.


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!


wana sell? :D .. that's if this ported one has the plate to stay away from (hopefully it don't)

[mgmsleeper]

I would do a Posi Port vs a Steggy. Oh and stay away from Steggy's stage 5 port; the torque plate has been known to crack.


i'll know which port job it is this week. i was just informed its ported. he told me by who i just forgot

[DOOM]

Had both ports done.

Posi performance FTW!!! :rock: :banana2:

[mgmsleeper]

Had both ports done.

Posi performance FTW!!! :rock: :banana2:

got cha i'll be hoping for that then

[DOOM]

got cha i'll be hoping for that then

Zack and a few members here will tell you the same thing!

My posi port got me into the 500 club!

[mgmsleeper]

Zack and a few members here will tell you the same thing!

My posi port got me into the 500 club!

that explains the smoke signals :burnout:

[RacerX]

Mine's a Posi knock-off that I've been doing myself. Plenum/elbow is ported and welded up too. IAT temps will be lower and boost pressure will be lower. HP/TQ will be more with less pressure because pressure is the effect of restriction. Less restriction = less pressure, yet, more power. ;)

http://www.mercurymarauder.net/gallery/data/579/DSC05126a1.jpg

[guspech750]

Mine's a Posi knock-off that I've been doing myself. Plenum/elbow is ported and welded up too. IAT temps will be lower and boost pressure will be lower. HP/TQ will be more with less pressure because pressure is the effect of restriction. Less restriction = less pressure, yet, more power. ;)

http://www.mercurymarauder.net/gallery/data/579/DSC05126a1.jpg

That looks fantastic!!


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!

[DOOM]

that explains the smoke signals :burnout:

:cool4: :coolman: :D :burn: :drive: :burnout: :burnout:

[mgmsleeper]

Mine's a Posi knock-off that I've been doing myself. Plenum/elbow is ported and welded up too. IAT temps will be lower and boost pressure will be lower. HP/TQ will be more with less pressure because pressure is the effect of restriction. Less restriction = less pressure, yet, more power. ;)

http://www.mercurymarauder.net/gallery/data/579/DSC05126a1.jpg


That looks fantastic!!


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!

yes it does

[mgmsleeper]

*update* the blower is the Steg port so i declined it. i dont want the issues of the plate breaking or cracking. but i will gain all the other parts for a great price. im still in the market for the blower.

whipple maybe?

[DOOM]

Just so you know.

Porting a blower isn't expensive at all.

Get your eaton and then send it out to get ported. Doesn't take long at all.

[SC Cheesehead]

*update* the blower is the Steg port so i declined it. i dont want the issues of the plate breaking or cracking. but i will gain all the other parts for a great price. im still in the market for the blower.

whipple maybe?

Easy there, bubba. Whipples aren't cheap. ;)

Doomie's suggestion is a good one. You can get a used Eaton, have it ported for a whole lot less than you'll spend on a Whipple.

[RacerX]

Yikes! Whipple on a stocker!!! POOF!!!!! :D

[mgmsleeper]

Just so you know.

Porting a blower isn't expensive at all.

Get your eaton and then send it out to get ported. Doesn't take long at all.

any info on who does them? is it in stages etc?


Easy there, bubba. Whipples aren't cheap. ;)

Doomie's suggestion is a good one. You can get a used Eaton, have it ported for a whole lot less than you'll spend on a Whipple.

yeah i know they aren't cheap it was just a thought. a big thought but hey who wouldn't want one? lol


Yikes! Whipple on a stocker!!! POOF!!!!! :D

then i'll be in need of :help:


...i wouldn't do a whipple unless i found one for an extream low price. right now im going for the Eaton and keeping that as my plan with this stock motor

[RacerX]

Posi (FTW!): http://posiperformance.com/cobraport/race-port

Stiegemeier: http://stiegemeier.com/pricing.html

[mgmsleeper]

Posi (FTW!): http://posiperformance.com/cobraport/race-port

Stiegemeier: http://stiegemeier.com/pricing.html


thanks ..looks good

[DOOM]

If I was to buy a USED EATON the first thing I would do is send it out to posi performance and have brian rebuild it and port it!

That way you wont have any surprises once that blower go's on!

[mgmsleeper]

If I was to buy a USED EATON the first thing I would do is send it out to posi performance and have brian rebuild it and port it!

That way you wont have any surprises once that blower go's on!

i will be looking for one with low miles in great contition. but was told those blowers have slim to no issues.

what are some issues of the eaton since you say send off for rebuild & port

[DOOM]

what are some issues of the eaton since you say send off for rebuild & port

I'll let Rex answer that for you. ;)

[RacerX]

Make sure all the Teflon coating is on the rotors. spin the rotors by hand. You want the bearings to move smoothly. Hold the left rotor carefully and slightly rotate the pulley/right rotor back and forth. If there's any play/knocking noise, you need or will need a new coupler.

[SC Cheesehead]

Make sure all the Teflon coating is on the rotors. spin the rotors by hand. You want the bearings to move smoothly. Hold the left rotor carefully and slightly rotate the pulley/right rotor back and forth. If there's any play/knocking noise, you need or will need a new coupler.

^^^^^ What he said. ^^^^^

FWIW, you can buy stock, re-built cores from Stiegy. They'll cost you more than one off e-Bay or from a seller on SVTP, but they're warrantied, and will be in OEM condition.

I didn't do what Bill recommended, and had some issues, so I ended up getting a re-built core as a result.

[guspech750]

There is also PSE Superchargers. The already have rebuilt Eatons. Works on a core charge system I think. I've talked to them a little.

http://www.pse.us/


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!

[SC Cheesehead]

There is also PSE Superchargers. The already have rebuilt Eatons. Works on a core charge system I think. I've talked to them a little.

http://www.pse.us/


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!


Good info! I didn't know about them. What's pricing on a rebuilt from them?

[mgmsleeper]

^^^^^ What he said. ^^^^^

FWIW, you can buy stock, re-built cores from Stiegy. They'll cost you more than one off e-Bay or from a seller on SVTP, but they're warrantied, and will be in OEM condition.

I didn't do what Bill recommended, and had some issues, so I ended up getting a re-built core as a result.

price please

[mgmsleeper]

There is also PSE Superchargers. The already have rebuilt Eatons. Works on a core charge system I think. I've talked to them a little.

http://www.pse.us/


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!


i checked the site.. $700 ... i'll passsssssssss.

[DOOM]

i checked the site.. $700 ... i'll passsssssssss.

Waaayyyyyyy cheaper just to have posi performance rebuild it!

I had mine REBUILT & PORTED including the back elbow upper intake plate and throttle body.

EVERYTHING PORT MATCHED including rebuilding the blower for less than $300.00!!!! :banana2:

Give Brian at posi a call! :chat:

[guspech750]

Waaayyyyyyy cheaper just to have posi performance rebuild it!

I had mine REBUILT & PORTED including the back elbow upper intake plate and throttle body.

EVERYTHING PORT MATCHED including rebuilding the blower for less than $300.00!!!! :banana2:

Give Brian at posi a call! :chat:

Ohhhhh. I did not know it was that reasonable at Posi!! Wooooooooo!! Hoooooooooo!!


---
- Sent from my iPhone
Eaton Swap = Wreeeeeeeeeedom!!

[mgmsleeper]

Waaayyyyyyy cheaper just to have posi performance rebuild it!

I had mine REBUILT & PORTED including the back elbow upper intake plate and throttle body.

EVERYTHING PORT MATCHED including rebuilding the blower for less than $300.00!!!! :banana2:

Give Brian at posi a call! :chat:

posi for the WIIIIINNNNNN!

[DOOM]

This was right after my Posi Port!
http://www.mercurymarauder.net/forums/showthread.php?t=66712&highlight=500+club

[mgmsleeper]

This was right after my Posi Port!
http://www.mercurymarauder.net/forums/showthread.php?t=66712&highlight=500+club


:bows::bows::bows::bows:

[mgmsleeper]

This was right after my Posi Port!
http://www.mercurymarauder.net/forums/showthread.php?t=66712&highlight=500+club

at those numbers what aren't you eating on the street?

[DOOM]

at those numbers what aren't you eating on the street?

Huh??? :confused:

[mgmsleeper]

Huh??? :confused:

eating, destroying, outrunning etc...

[DOOM]

eating, destroying, outrunning etc...

You don't know me very well do you??? :D :lol:

[BODYMAN]

*update* the blower is the Steg port so i declined it. i dont want the issues of the plate breaking or cracking. but i will gain all the other parts for a great price. im still in the market for the blower.

whipple maybe?

Like the others said better get ya a motor before putting a Whipple on there. Thats what happen to me I came accros a total deal on my whipple so after purchasing I went motor shopping! Result on a very mild tune 545/552 Oh yea not to metion the sound of the Whipple when you stomp on it!!:D

[BODYMAN]

at those numbers what aren't you eating on the street?

With these car's being so heavy you need more then 500 to eat everything on the street.. I get smoked by the Termi's around here with 2.3 Whipples all the time.

[SC Cheesehead]

at those numbers what aren't you eating on the street?

|
|
|
|
|
|
|
\/

P

o

p

s

;) ------> :D

[mgmsleeper]

You don't know me very well do you??? :D :lol:

ive read you eat hemis. lol just was trying too see what else our cars could give a good run with or outrun with that power to weight ratio

[mgmsleeper]

Like the others said better get ya a motor before putting a Whipple on there. Thats what happen to me I came accros a total deal on my whipple so after purchasing I went motor shopping! Result on a very mild tune 545/552 Oh yea not to metion the sound of the Whipple when you stomp on it!!:D

nice numbers


With these car's being so heavy you need more then 500 to eat everything on the street.. I get smoked by the Termi's around here with 2.3 Whipples all the time.

yea i know power to weight ratio is a factor but those numbers are still impressive ...to me at least

[DOOM]

ive read you eat hemis. lol just was trying too see what else our cars could give a good run with or outrun with that power to weight ratio

I've beaten corvettes & porsches as well as many many other sports cars!

Unfortunately we can't post kill threads anymore. :depress: :shake: :alone:

[mgmsleeper]

I've beaten corvettes & porsches as well as many many other sports cars!

Unfortunately we can't post kill threads anymore. :depress: :shake: :alone:


nice. and yes i've seen that no kill posting

[justbob]

Waaayyyyyyy cheaper just to have posi performance rebuild it!

I had mine REBUILT & PORTED including the back elbow upper intake plate and throttle body.

EVERYTHING PORT MATCHED including rebuilding the blower for less than $300.00!!!! :banana2:

Give Brian at posi a call! :chat:

Times have changed since then... I was quoted $500 for just the port on the blower and inlet just two weeks ago. $75-$80 more for the TB. This is not rebuilt, just ported.
Sent from my Ally using Tapatalk

[guspech750]

Times have changed since then... I was quoted $500 for just the port on the blower and inlet just two weeks ago. $75-$80 more for the TB. This is not rebuilt, just ported.
Sent from my Ally using Tapatalk
Way to go Justbob!! Are you happy for crushing my ported Eaton dreams........:alone:

[justbob]

Way to go Justbob!! Are you happy for crushing my ported Eaton dreams........:alone:

I owed you a crush to reality from earlier today!

Sent from my Ally using Tapatalk

[guspech750]

I owed you a crush to reality from earlier today!

Sent from my Ally using Tapatalk
:rofl: :rofl::rofl:

:beer:

[DOOM]

Times have changed since then... I was quoted $500 for just the port on the blower and inlet just two weeks ago. $75-$80 more for the TB. This is not rebuilt, just ported.
Sent from my Ally using Tapatalk

Well I guess I got one helluva deal!!! :banana2:

Are you sure on the pricing??? I just got mine done less than a year ago!

[justbob]

Well I guess I got one helluva deal!!! :banana2:

Are you sure on the pricing??? I just got mine done less than a year ago!

Yep. It's on their website, plus I talked to brian for a good 10 minutes. Still a good price I think. Small money for good numbers. Not sure how you slid in so cheap!

Sent from my Ally using Tapatalk

[SC Cheesehead]

Yep. It's on their website, plus I talked to brian for a good 10 minutes. Still a good price I think. Small money for good numbers. Not sure how you slid in so cheap!

Sent from my Ally using Tapatalk


Bucks, plus Doomie tossed in a couple midgets...

[CBT]

Small money for good numbers. Not sure how you slid in so cheap!


That's what she said!!

[RacerX]

Yep. It's on their website, plus I talked to brian for a good 10 minutes. Still a good price I think. Small money for good numbers. Not sure how you slid in so cheap!

Sent from my shorts using a tiny antenae

It's a lot of work/time/labor and you definitely need the right tools!

[RacerX]

Speeking of porting labor...

http://www.mercurymarauder.net/gallery/data/579/IMG_0658a.jpg
http://www.mercurymarauder.net/gallery/data/579/medium/IMG_0662a.jpg (javascript:;)
http://www.mercurymarauder.net/gallery/data/579/medium/IMG_0668a.jpg (javascript:;)

[MOTOWN]

Looks great bud! i see youve got a lot of time into it

[RacerX]

Stopped when the sun when down. Hand's still vibrating! :D No, Casey isn't at my house! :lol:

[DOOM]

Stopped when the sun when down. Hand's still vibrating!

THAT'S WHAT SHE SAID!!! :banana2:

[CBT]

Stopped when the sun when down. Hand's still vibrating! :D No, Casey isn't at my house! :lol:
More than your hand would be if I was there, HELLO!