egr tube

[SGT_MERC]

I have an 05 GM and I would like to know if there is a type of flex tubing that can be used as an egr tube? I remember someone saying there was but I can't find it in the search I ran. If I do an egr delete what has to be changed? I will be getting a new tune put in soon. Thank You

[bawazir]

Just wondring do you know where is the 05 crown vic EGR solenoid located?

[RacerX]

Someone here used uncoated ss flexible natural gas pipe. If you do a delete, you need to turn the egr flags off in the tune as well as capping off both ends. Depending on PA state inspections, that may be noticed by the state.

[Blackened300a]

I used some heat to massage my EGR tube to make it work.

Off topic, You making it to MV9 SGT Merc?

[justbob]

PM Dtub, I believe he used SS Gas flex hose on his second to last build. You could also do what I did to Guspech's eaton swap, that is cutting the stocker into three pieces, flipping around, trimming, and rewelding a new one, if you are planning on relocating.

Sent from my Ally using Tapatalk

[SGT_MERC]

I used some heat to massage my EGR tube to make it work.

Off topic, You making it to MV9 SGT Merc?

I used some heat and did some massaging, but the tube is to long. The egr is being moved closer to the firewall and I need to remove some length or get some flex tubing. Will smaller diameter tubing work, as long as I neck it to the correct size needed for the hook-ups. Yes I will be there. I won't be staying over night, but plan on hanging out with everyone into the night. I relocated my battery to the trunk. Ordered a 230 amp alternator. When I took my old alternator off, my lower intake had cracks running through it and 2 holes the size of my thumb going through to the runners. Now I'm doing a completely different intake and relocating the egr. Fun Fun yyyyeeeeaaaahhhh.

[SGT_MERC]

Just wondring do you know where is the 05 crown vic EGR solenoid located?

The egr tube connects into the passenger side of the upper intake plenum.

[bawazir]

no no i need replace my seleniod do u know where is at t

[burt ragio]

[QUOTE=SGT_MERC;1094011]I used some heat and did some massaging, but the tube is to long. The egr is being moved closer to the firewall and I need to remove some length or get some flex tubing. Will smaller diameter tubing work, as long as I neck it to the correct size needed for the hook-ups. Yes I will be there. I won't be staying over night, but plan on hanging out with everyone into the night. I relocated my battery to the trunk. Ordered a 230 amp alternator. When I took my old alternator off, my lower intake had cracks running through it and 2 holes the size of my thumb going through to the runners. Now I'm doing a completely different intake and relocating the egr. Fun Fun yyyyeeeeaaaahhhh.[/QU

How in the world did your car run with two holes in the intake ?

[SGT_MERC]

I have no idea. The intake was so bad, the entire plastic lip between the upper and lower intake was broken off and lay crumbled in the valley between the heads.