Cluster acting up.

[bolsen]

I changed my cluster bulbs to leds a couple nights ago, tonight I noticed my RPMs are sitting at static 0 and my gad guage is sitting at 1/4 tank. My MPH and engine temps are functioning though. What would effect my RPM and gas guages but not my MPH or engine temp guages? Mess with one thing, disable another...AHH!:lol:

[SID210SA]

Take it out again and make sure the green circut plasting thingy is inserted in the the cluster evenly....I noticed when I changed my bulbs the green thing was not all the way in the cluster and had to adjust it a few times for it to go in correctly (no, thats not what she said).

[ctrlraven]

Yeah pull the cluster out and make sure the plugs are seated in properly and click.

[bolsen]

awesome. thanks guys. i will check when i get home.

i was hoping i wouldnt have to go back in there anytime soon, but, such is life...

[Phrog_gunner]

awesome. thanks guys. i will check when i get home.

i was hoping i wouldnt have to go back in there anytime soon, but, such is life...

Since it seems pretty touchy, you might want to leave all of the trim off and give her a trip around the block to make sure everything is A-OK before you button it all back up.

[ctrlraven]

Since it seems pretty touchy, you might want to leave all of the trim off and give her a trip around the block to make sure everything is A-OK before you button it all back up.

That's what I always do just to make sure even though I have mine out in 2-4 mins still a hassle.

[napolitano]

I see u figured it . Good. U like them? What color did u go with? Also if u have a aeroforcetech gauge, u can use that to check your stock gauges.

[bolsen]

I didn't wind up filing off the green filters. I just used cool white LEDs back there instead of the halogens. I should've went with higher lumens (i only used 3-4) but next time I will probably use 7-8. All in all, I'm very pleased with the outcome.